ESA-E Series Spectrum Analyzer - Agilent Technologies

More documents

Recommendations

Info

AmplitudeSpecificationsAmplitude rangeMeasurement rangeMechanical inputattenuator rangeElectronic inputattenuator rangeMaximum safe input levelESA spectrum analyzerEXA signal analzyerE4402B E4404B/05B E4407B All frequency rangesDisplayed anverage noise level (DANL) tomaximum safe input level0 to 75 dB in5 dB steps0 to 75 dB in5 dB steps0 to 65 dB in5 dB stepsDisplayed anverage noise level (DANL)to +23 dBmStandardOption FSAOption EA3Full attenuationrange with EA3 aAverage continuous power +30 dBm (1 W) +30 dBm (1 W)0 to 60 dB in10 dB steps0 to 60 dB in2 dB steps0 to 24 dB in1 dB steps0 to 84 dB in1 dB stepsPeak pulse power +50 dBm (100 W) b + 50 dBm (100 W) and< 10 µs pulse width, < 1% duty cycleinput attenuation ≥ 30 dBDC voltage0 VdcDC coupled(Option UKB)AC coupled 100 Vdc 50 Vdc(Option UKB)0 Vdc 0 Vdc ±0.2 Vdc50 Vdc 50 Vdc(Option UKB)1 dB gain compressionTotal power at input mixer c Two tone50 MHz to 6.7 GHz 0 dBm6.7 to 13.2 GHz –3 dBm13.2 to 26.5 GHz –5 dBma. Full attenuation range 0 to 84 dB is mechanical + electronic attenuation.b. < 10 µs pulse width, < 1% duty cycle.c. Mixer power level (dBm) = input power (dBm) - input attenuation (dB).Preamp on (P03)10 MHz to 3.6 GHz±70 Vdc–10 dBm nominal20 MHz to 26.5 GHz +9 dBm nominal8
AmplitudeSpecifications (continued)STD/STG express analyzerESA spectrum analyzerCOM express analyzer or ESAwith 1DR and 1D5EXA signal analyzerAll frequency rangesE4402B E4404/05B/07B E4402B E4404/05/7BDisplayed average noise level (dBm) (input terminated, 0 dB attenuation, sample detector) specificationsTypical values shown in italicConditionsFrequency10 Hz RBW/1 Hz VBW (Option 1DR)1 Hz RBW/VBW (ESA withOption 1DR and 1D5)1 to 10 MHz –139 –137, –139 a –146, –149 a –147, –149 a –145, –14910 to 500 MHz500 MHz - 1 GHz–136, –140 –135, –139–1491 to 1.5 GHz–150–135, –1401.5 to 2 GHz–150–146, –1502 to 3 GHz –133, –140–146, –148–131, –138 –1483 to 6 GHz–144, –1496 to 12 GHz –130, –137 –147 –143, –147NANA12 to 22 GHz –126, –134 –144 –137, –14222 to 26.5 GHz –125, –132 –142 –134, –140Displayed average noise level (dBm) with RF preamplifier b1 to 10 MHz –152 –155 –162 –165 NA10 MHz to 1 GHz–151, –157–167–152, –156–1661 to 2 GHz –151, –155 –165–160, –1622 to 3 GHz –151, –154 –149, –152 –164 –162 –159, –160a. Custom path only, Option 120, typical.b. 20 to 30 °C. For 0 to 50 °C range see specification guide.9
Page 5: FrequencySpecifications (continued)
Page 10 and 11: AmplitudeSpecifications (continued)
Page 12 and 13: AmplitudeSpecifications (continued)
Page 14 and 15: Tracking GeneratorIn order to gain
Page 16 and 17: General SpecificationsESA-E spectru
Page 18: www.agilent.comwww.agilent.com/find

ESA-E Series Spectrum Analyzer - Agilent Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?