Untitled - Osram

EC-Declaration of ConformityAnnexDocument number: 2012 / QTP-M_03The conformity of the designated product(s) with the provisions of the European Directive2006/95/EC is given by the compliance with the following European Standard(s). If notelsewhere/otherwise indicated the edition/amendment as referenced below applies.EN 61347-1:2008 + A1:2011EN 61347-2-1.2001 +Corrigendum:2003 +A1:2006 +Corrigendum:2006Corrigendum:2010EN 61347-2-2:2012EN 61347-2-3:2011EN 61347-2-7:2012EN 61347-2-8:2001 +Corrigendum:2003 +A1:2006 +Corrigendum:2010EN 61347-2-9:2001 +Corrigendum:2003 +A1:2003 + A2:2006 +Corrigendum:2010EN 61347-2-10:2001 + A1:2009 +Corrigendum:2010EN 61347-2-11:2001 +Corrigendum:2002 +Corrigendum:2010EN 61347-2-12:2005 + A1:2010EN 61347-2-13:2006EN 61549:2003 + A1:2005 +A2:2010EN 62031:2008EN 62034:2006EN 62035:2000 + A1:2003EN 62471:2008IEC/TR 62471-2:2009Form_EC_120430Lamp controlgear — Part 1: General and safety requirementsLamp controlgear — Part 2-1: Particular requirements for starting devices (otherthan glow starters)Lamp controlgear — Part 2-2: Particular requirements for d. c. or a. c. suppliedelectronic step-down convertors for filament lampsLamp controlgear — Part 2-3: Particular requirements for a. c. suppliedelectronic ballasts for fluorescent lampsLamp controlgear — Part 2-7: Particular requirements for battery suppliedelectronic controlgear for emergency lighting (self-contained)Lamp controlgear — Part 2-8: Particular requirements for ballasts forfluorescent lampsLamp controlgear — Part 2-9: Particular requirements for ballasts for dischargelamps (excluding fluorescent lamps)Lamp controlgear — Part 2-10: Particular requirements for electronic invertorsand convertors for high-frequency operation of cold start tubular dischargelamps (neon tubes)Lamp controlgear — Part 2-11: Particular requirements for miscellaneouselectronic circuits used with luminairesLamp controlgear — Part 2-12: Particular requirements for d. c. or a. c. suppliedelectronic ballasts for discharge lamps (excluding fluorescent lamps)Lamp controlgear — Part 2-13: Particular requirements for d. c. or a. c. suppliedelectronic controlgear for LED modulesMiscellaneous lampsLED modules for general lighting — Safety specificationsAutomatic test systems for battery powered emergency escape lightingDischarge lamps (excluding fluorescent lamps) — Safety specificationsPhotobiological safety of lamps and lamp systemsPhotobiological safety of lamps and lamp systems — Part 2: Guidance onmanufacturing requirements relating to non-laser optical radiation safety2/5

EC-Declaration of ConformityAnnexDocument number: 2012 / QTP-M_03EN 62560:XXXXSelf-ballasted LED-lamps for general lighting services by voltage > 50 V —Safety specificationsThe conformity of the designated product(s) with the provisions of the European Directive2004/108/EC is given by the compliance with the following European Standard(s). If notelsewhere/otherwise indicated the edition/amendment as referenced below applies.EN 55015:2006 + A1:2007+ A2:2009EN 61000-3-2:2006 + A1:2009+ A2:2009EN 61000-3-3:2008EN 61547:2009Limits and methods of measurement of radio disturbance characteristics of electricallighting and similar equipmentElectromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic currentemissions (equipment input current ≤ 16 A per phase)Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltagechanges, voltage fluctuations and flicker in public low voltage supply systems, forequipment with rated current ≤ 16 A per phase and not subjected to conditionalconnectionEquipment for general lighting purposes — EMC immunity requirementsThe conformity of the designated product(s) with the provisions of the European Directive1999/5/EC is given by the compliance with the following European Standard(s). If notelsewhere/otherwise indicated the edition/amendment as referenced below applies.ETSI EN 300220-1 V2.1.1:ETSI EN 300220-2 V2.1.2:ETSI EN 301489-1 V1.8.1ETSI EN 301489-3 V1.4.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequencyrange with power levels ranging up to 500 mW; Part 1: Technical characteristics andtest methodsElectromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequencyrange with power levels ranging up to 500 mW; Part 2: Harmonized EN coveringessential requirements under article 3.2 of the R&TTE DirectiveElectromagnetic compatibility and Radio spectrum Matters (ERM); Electro MagneticCompatibility (EMC) standard for radio equipment and services; Part 1: Commontechnical requirementsElectromagnetic compatibility and Radio spectrum Matters (ERM); Electro MagneticCompatibility (EMC) standard for radio equipment and services; Part 3: Specificconditions for Short-Range Devices (SRD) operating on frequencies between 9 kHzand 40 GHzForm_EC_1204303/5

EC-Declaration of ConformityAttached listDocument number: 2012 / QTP-M_03QTP-M 1x26-42QTP-M 2x26-32Form_EC_1204305/5