Untitled - Osram

EC-Declaration of ConformityAnnexDocument number: 2012 / QTP-M_03EN 62560:XXXXSelf-ballasted LED-lamps for general lighting services by voltage > 50 V —Safety specificationsThe conformity of the designated product(s) with the provisions of the European Directive2004/108/EC is given by the compliance with the following European Standard(s). If notelsewhere/otherwise indicated the edition/amendment as referenced below applies.EN 55015:2006 + A1:2007+ A2:2009EN 61000-3-2:2006 + A1:2009+ A2:2009EN 61000-3-3:2008EN 61547:2009Limits and methods of measurement of radio disturbance characteristics of electricallighting and similar equipmentElectromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic currentemissions (equipment input current ≤ 16 A per phase)Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltagechanges, voltage fluctuations and flicker in public low voltage supply systems, forequipment with rated current ≤ 16 A per phase and not subjected to conditionalconnectionEquipment for general lighting purposes — EMC immunity requirementsThe conformity of the designated product(s) with the provisions of the European Directive1999/5/EC is given by the compliance with the following European Standard(s). If notelsewhere/otherwise indicated the edition/amendment as referenced below applies.ETSI EN 300220-1 V2.1.1:ETSI EN 300220-2 V2.1.2:ETSI EN 301489-1 V1.8.1ETSI EN 301489-3 V1.4.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequencyrange with power levels ranging up to 500 mW; Part 1: Technical characteristics andtest methodsElectromagnetic compatibility and Radio spectrum Matters (ERM); Short RangeDevices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequencyrange with power levels ranging up to 500 mW; Part 2: Harmonized EN coveringessential requirements under article 3.2 of the R&TTE DirectiveElectromagnetic compatibility and Radio spectrum Matters (ERM); Electro MagneticCompatibility (EMC) standard for radio equipment and services; Part 1: Commontechnical requirementsElectromagnetic compatibility and Radio spectrum Matters (ERM); Electro MagneticCompatibility (EMC) standard for radio equipment and services; Part 3: Specificconditions for Short-Range Devices (SRD) operating on frequencies between 9 kHzand 40 GHzForm_EC_1204303/5