DEHA HD-SOCKET LIFTING SYSTEM - Alcor SA

THE HD-SOCKET LIFTING SYSTEMGreater safety, fewer components,integral socket protectorSocket protector system with dataclipThe new generation HD-Lifting Systemwith socket protector and integral dataclip caters for the load range up to 15tonnes with only eight load groups.In practice, this means:The new generation HD-Lifting Anchorhas been designed with an integralsocket protector. This is cleary labelledwith the load group (data clip).Fit the data clip supplied with the unit.• fewer components,• less storage space,• Iower stocking requirements,• less care and maintenance oflifting linkThe dimensions of the new HD-LiftingAnchors are carefully designed to keepdiameter to a minimum, which makesthem particulary suitable for use withthin-walled precast elements.Wider application due to smallerdimensionsThe compact design the HD-Combi-Anchor, with its optimum lengthand foot shape, offers a wide range ofbenefits:• Less space required in theprecast element• Smaller structural componentdimensions• Easy installation in the formworkand reinforcement• Short anchors• Low weightThis patented system offers protectionagainst contamination from laitanceand dirt, and the ingress of water. Thisprevents ice or water from accumulatingin the anchor socket, and significantlyreduces the risk of damage from corrosion.The integration of a colour-codeddata clip, specifying the manufacturer,thread size and load group, satisfies theidentification requirements according toZH 1/17, for increased safety.Robust lifting link for increased safetyand economyThe robust HD-Lifting Link, with itsfixed steel link, provides a high level ofsafety and offers clear economic benefitsdue to the increased service life. TheHD-Lifting Link has the following outstandingfeatures:• A loop ready for the crane hookwhich is permanently marked withits identification and resistant towear.• A robust ring-bolt with rolled andspecially hardened thread.Screw the nailing plate into the data clip to drivethe HSS protector down the socket. Rotate the dataclip in the desired direction (depending on theposition of the angled lift reinforcement).Ready for casting in. Fix the nailing plate to theformwork and wire the tail to the reinforcement ifnecessary.The HD-Lifting Link is easy to use,withstands diagonal and shear forcesand activates the socket protector. Thehexagonal driver makes it easy to bothscrew down the thread protector forlifting and bring it up again when liftingis complete.HD load groupsRd 12 Rd 16 Rd 20 Rd 24 Rd 30 Rd 36 Rd 42 Rd 521.3 2.5 4.0 5.0 7.5 10.0 12.5 15.00.5 0.8 1.2 1.6 2.0 2.5 4.0 6.3 8.0 12.5 15.0Rd12 Rd 14 Rd 16 Rd 18 Rd 20 Rd 24 Rd 30 Rd 36 Rd 42 Rd 52 Rd 56traditional load groups2