Cable construction and colour code

BroadbandDistribution-cableDistribution-cable - Indoor Cable.The distribution-cable consists of multiple dry-buffered 900µm fibres covered byaramid yarns (strength members), with a low smoke halogen-free outer jacket.The individual fibres are suitable for direct connector assembly.This cable is suitable for indoor installation in dry rooms, inside oftelecommunication- and datasystems.Characteristics Properties UnitProduct groupFibre Optic cablesSeriesTypeFibre optic cable Single modeDistribution-cableStandardization IEC 60794-2Test procedures IEC 60794-1-2ApplicationCable metal freeStrain reliefHalogen free (acc. EN 50267-2-2)Low smoke (acc. EN50268-2)Longitudinal water blockingRadial water blockingType of ductFibre typeOptical fibre standardMaterial outer sheathColour outer sheathInsideYesYesYesYesNoNoDry buffer 0,9mmSingle modeITU-T G.657.A1LSZHYellowHalogen free Acc. IEC 60754-1Low smoke Acc. IEC 61034Flame retardant Acc. IEC 60332-1-2Installation temperature -5 / 45 °COperation temperature range -20 / 60 °CTransportation and storage temperature -25 / 70 °CAttenuation @ 1310 nm 0.5 dB/kmAttenuation @ 1550 nm 0.5 dB/kmAttenuation @ 1625 nm 0.5 dB/kmConstruction and Colour codesSee appendixBendingradiusafterinstallationBendingradiusduringinstallationTensileloadshorttermOuterPartnumber Descriptiondiameterapprox.(mm)Netweight(Kg/km) (mm) (mm) (Tm)69811 4x SM G.657.A1 (4x1) 4,8 19 90 45 500 10069812 8x SM G.657.A1 (8x1) 5,6 28 110 55 700 10069813 12x SM G.657.A1 (12x1) 6,4 36 130 60 1000 20069814 24x SM G.657.A1 (24x1) 8,2 55 170 85 1000 200TensileloadLongTerm(Tl)Copyright (c) TKF, 09-12-2011 Subject to technical alterations Page 12