ZA180(I) Series Runway Centreline & TDZ - IHR-Aviation

IHR GmbH Hofmeister + Rumpfwww.ihr-aviation.netcomponents1 Marker cone (1-off) 292152 Rim (1-off) SLC292143 Glass dome ”O” ring (1-off) SLC330914 Glass dome (1-off) SLC160565 Filter glass various colours(1 or 2-off) See optional extras6 Filter clip (4 off) 292197 Lens holder (2-off) 292108 Lens (2-off) 279239 Top casting (1-off) 2921110 J1/80 Pk30d 100W SLC08057or J1/83 Pk30d 150WSLC08088or J1/84 Pk30d 200WSLC0808911 Lamp retaining spring (1-off) 2921612 Base casting “O” ring (1-off) SLC3309113 Lock spring (1-off) 2921714 Base casting (1-off) Not Saleable15 Short lead for 1”O/D stem16 B type lead for 1“ I/D and M32 stem SLC1300117 M20 elkay gland set and seal (1-off)18 1“ O/D stem 2922319 1“ I/D stem 2922220 M32 stem 2922121 Clamp (1-off) 2921322 M32 hexagonal nut (2-off)23 32 dia washer (2-off)24 Top Terminal Block Assy25 Base Terminal Block Assytypical installation methods• On a 204mm (8”) dia. ground mounting plate• On a FAA L867 type base can• On a ground mounting spike• On a FAA type frangible coupling• Other installation methods available on requestZA163 installed on 24mm (8”) ground mounting plateZA163 installed on a FAA L867 base canNoteThe ground mounting plate is designed to be held down by means of three 10mm(3/8”) rag bolts grouted into the concrete block on 178mm PCD1.2.3.4.ZA163 25mm O/D SpigotFAA Type L867 BaseplateFrangible CouplingFAA Type L867 Base5.6.7.Isolating transformerGasketSupport Plate