ZA180(I) Series Runway Centreline & TDZ - IHR-Aviation

IHR GmbH Hofmeister + Rumpfcomponentswww.ihr-aviation.net1 Body casting (anodised or golden yellow) Not Saleable2 Clear prism (1 or 2) SLC16069or red dichroic prismSLC191413 Blank for prism aperture SLC400924 Prism gasket (2) SLC330585 Prism clamp gasket SLC330696 Prism retaining clamp (2) SLC320377 Lampholder (1 or 2) SLC320408 Lamp retaining spring (1 or 2) SLC320399 Cold reflector lamp - 45/49W 6.6A (1 or 2) SLC0806510 Lamp gasket SLC3308311 Lamp by-pass disc assembly (1 or 2) DRG2884812 45W by-pass disc (1 or 2) SLC2113413 Seating pot ‘O’ ring seal SLC3309414 Gasket, body to base SLC3309515 Lampholder support block SLC2129616 Cable gland assembly (1 or 2) SLC21114/5/617 ‘B’ type plug lead (1 or 2) SLC13001typical installation methods• In 8” dia seating potatg airports type ZM203(I). Adaptor rings enable the fitting to bemounted into new or existing standard PSA 12” and 15.5” diaseating rings.• In FAA 12” dia L-868 baseInstallation on to FAA L-868 seating base can be achieved by usingan 8 -12” adaptor ring.ZA181(I) installed in ZM203(I) seating pot (dry)ZA181(I) installed on FAA L-868 base1.2.ZA181 (I) fitting (F29282)ZM203 (I) seating pot (F29276)3.4.Secondary leadGroutZA181(I) installed in ZM203(I) seating pot1.2.3.4.5.ZA181 (I) fitting (F29282)Mounting adaptor - axial *H29249)FAA L-868 base (one piece)Outer earth terminalInner earth terminal6.7.8.9.Isolating transformerSecondary connectionPrimary connectionGrommet