PSI 6000 Medium-Frequency Inverters Technical ... - Bosch Rexroth

More documents

Recommendations

Info

PSI 6500.XXX W1 12 -3[1] M6 mounting optionsD rear panel[2] mains supply connection with shrouding cover[3] MF inverter symbol[4] cooling water connection, supplynipple (brass) with standard taper bore IAW DIN EN 560,external thread M16x1.5[5] cooling water connection, dischargenipple (brass) with standard taper bore IAW DIN EN 560,external thread M16x1.5[6] integrated weld timer[7] slot for type-specific I/O interface:D parallel I/O interfaceD serial I/O interfaceD fieldbus I/O interface[8] slot for retrofitting a quality module[9] slot for fieldbus interface for programming[10] battery compartment[11] PSG 3000 welding transformer connection (with shrouding cover)[12] hose connection between the two water coolers1070 080 059-101 (2001.04) GB
12 -4PSI 6500.XXX W112.3 Technical data, PSI 6500.XXX W1TypeWeld timerI/O interfaceQuality moduleDegree of protectionInverter ambient temperatureCoolingTemperature monitoringStorage temperatureCorrosion3-phase MF inverter, module designed forrecessed mountingintegratedSlot for parallel, serial or fieldbus interfaceSlot prepared for retrofittingIP 20; designed for modular enclosure or forinstallation in switchgear cabinets with IP 54max. 45 C; If thermal outputs exceed50% of the rated ouput, a cabinet coolingsystem starts running, which adjusts theambient temperature to 35 C.water 10 l/min.; max. 30 Cintegrated-- 25 Cto+70 CThe ambient air must be free of acids, causticsolutions, corrosive agents, salts andmetal vapors of any major concentrationHumidity Humidity class F as per DIN 40040;20 C at 90% relative humidity;40 C at 50% relative humidity (as perVDE 0113); Moisture condensation on theMF inverters must be prevented.Air pressureLine voltage connectiongrounded TN or TT systemNominal system current;max. continuous thermal currentMax. output currentMax. secondary current; dependingon the transformer usedVoltage supply;Weld timer CPU;I/O interfaceClock frequencyOvervoltage protectionElectrical connection, mains supplyand transformerWire rangeBasic switchgear cabinet lossMax. ventilating and cooling loss dissipatedvia external water-coolerSwitchgear cabinet loss at max. powerWeightMounting positionAny within a range of up to 2000 m abovesea level400 V --20% to 480 V +10%; 50/60 Hz660 A, with cubicle cooling unit2400 A120 kA (PSG 3100)24 V DC; min. 19 V DC up to max. 30 V DCas per EN 61131-2, (external power supply),or, alternatively, power supply from theweld current system (internal power supply)1kHzMOV; Metal Oxide Varistorwith cable lugs;M10 bolts for each connection2to4cables,120mm 2 each100 W4400 W850 Wapprox. 70 kg, mech. load may be distributedvertical or with its back on mounting plate1070 080 059-101 (2001.04) GB
Page 1 and 2:
PSI 6000PSI 6000 Medium-Frequency I
Page 4 and 5:
ContentsVContentsPage1 Safety instr
Page 6 and 7:
ContentsVIIPage12 PSI 6500.XXX W1 .
Page 8 and 9:
Safety instructions 1-11 Safety ins
Page 10 and 11:
Safety instructions 1-31.3 Intended
Page 12 and 13:
Safety instructions 1-51.5 Qualifie
Page 14 and 15:
Safety instructions 1-7DANGEROUS EL
Page 16 and 17:
Safety instructions 1-91.7 Electric
Page 18 and 19:
Safety instructions 1-11CAUTIONConn
Page 20 and 21:
Safety instructions 1-131.9 Ensurin
Page 22 and 23:
Safety instructions 1-151.11 Retrof
Page 24 and 25:
Safety instructions 1-171.13 Workin
Page 26 and 27:
Setup 2-12 Setup2.1 FeaturesDDDDDDD
Page 28 and 29:
Setup 2-3Welding transformerU1V1W1P
Page 30 and 31:
Setup 2-52.4 MonitoringIn order to
Page 32 and 33:
Setup 2-7kAsplash limitgalvanized s
Page 34 and 35:
Notes on Rating 3-13 Notes on Ratin
Page 36 and 37:
Commissioning 4-14 CommissioningDAN
Page 38 and 39:
Maintenance 5-15 MaintenanceDANGERO
Page 40 and 41:
Malfunction 6-16 MalfunctionAlthoug
Page 43 and 44:
7-2Type overviewPSI 6200.XXX W1D Me
Page 45 and 46:
8-2PSI 6025.XXX L18.2 PSI 6025.XXX
Page 47 and 48:
8-4PSI 6025.XXX L18.3 Technical dat
Page 49 and 50: 8-6PSI 6025.XXX L18.5 Electrical co
Page 51 and 52: 8-8PSI 6025.XXX L18.7 Accessories,
Page 53 and 54: 8-10PSI 6025.XXX L18.8 Ordering, PS
Page 55 and 56: 9-2PSI 6100.XXX L1/L2/W1/W29.3 PSI
Page 57 and 58: 9-4PSI 6100.XXX L1/L2/W1/W29.4 Tech
Page 59 and 60: 9-6PSI 6100.XXX L1/L2/W1/W29.5 Dime
Page 61 and 62: 9-8PSI 6100.XXX L1/L2/W1/W29.7 Elec
Page 63 and 64: 9-10PSI 6100.XXX L1/L2/W1/W2The hea
Page 65 and 66: 9-12PSI 6100.XXX L1/L2/W1/W29.10 Lo
Page 67 and 68: 9-14PSI 6100.XXX L1/L2/W1/W2DDDFor
Page 69 and 70: 9-16PSI 6100.XXX L1/L2/W1/W2Notes:1
Page 71 and 72: 10 -2PSI 6200.XXX W1/W210.3 PSI 620
Page 73 and 74: 10 -4PSI 6200.XXX W1/W210.4 Technic
Page 75 and 76: 10 -6PSI 6200.XXX W1/W210.6 Electri
Page 77 and 78: 10 -8PSI 6200.XXX W1/W2The heat sin
Page 79 and 80: 10 -10PSI 6200.XXX W1/W210.9 Load d
Page 81 and 82: 10 -12PSI 6200.XXX W1/W210.11 Order
Page 83 and 84: 11 -2PSI 6300.XXX L1/L2/W1/W211.3 P
Page 85 and 86: 11 -4PSI 6300.XXX L1/L2/W1/W211.4 T
Page 87 and 88: 11 -6PSI 6300.XXX L1/L2/W1/W211.5 D
Page 89 and 90: 11 -8PSI 6300.XXX L1/L2/W1/W211.7 E
Page 91 and 92: 11 -10PSI 6300.XXX L1/L2/W1/W2The h
Page 93 and 94: 11 -12PSI 6300.XXX L1/L2/W1/W211.10
Page 95 and 96: 11 -14PSI 6300.XXX L1/L2/W1/W2DDDFo
Page 97 and 98: 11 -16PSI 6300.XXX L1/L2/W1/W2Notes
Page 99: 12 -2PSI 6500.XXX W112.2 PSI 6500.X
Page 103 and 104: 12 -6PSI 6500.XXX W112.5 Electrical
Page 105 and 106: 12 -8PSI 6500.XXX W1The heat sink o
Page 107 and 108: 12 -10PSI 6500.XXX W112.8 Accessori
Page 109 and 110: 12 -12PSI 6500.XXX W1Notes:1070 080
Page 111 and 112: 13 -2CE declaration of conformityNo
Page 113 and 114: A-2AnnexElectrical connection PSI 6
Page 115 and 116: A-4AnnexNotes:1070 080 059-101 (200
show all

PSI 6000 Medium-Frequency Inverters Technical ... - Bosch Rexroth

Create successful ePaper yourself

Delete template?

Save as template?