LFS | SKL skirting trunking systems - OBO Bettermann

Mounting aid for SKL skirting trunkingPlanning aid, SKLCable trunking application areaThe SKL skirting trunking can be used as askirting board in housing. This allows tidy retroinstallationof cables.Cable trunking application area with socketThe mounting boxes mean that sockets canbe mounted wherever they are required.Use of coloured variantThe beech design means that the SKL skirtingtrunking can also be used with wooden floors.Trunking mountingThe base of the SKL skirting trunking is fastenedusing bolts and anchors or knock-in anchors.Mounting of coverThe sealing lip ensures optimum wall and floorconnections. The cover is simply pushed ontothe base.Mounting of fittingThe fitting is attached to the cover and thus fastened.This allows the implementation of a visuallyattractive installation.Mounting of device supportThe device support is placed on the trunkingbase and fastened to the wall with four bolts.Mounting of Schuko socketThe Schuko socket is connected and mountedon the screwless terminals located in the baseof the device support.Mounting of Modul 45 devicesThe Modul 45 sockets are connected to the cableand pushed into the mounting box until aclick can be heard.Mounting of coverThe cover is run up to the mounting box baseand placed on the base.Mounting of device support coverThe cover of the device support is simplylocked onto the base. The reducing elementsmay need to be removed, depending onthe trunking height.Installation of mounting box coverThe cover of the device support is placed onthe base and fastened using the socket cover.06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)24 OBO LFS