continued

BDEIFIIAT ORICOMMERCIAL LOCKSETSKEYLESS & PIN TUMBLERBUILDER SERIESCYLINDRICAL BALL KNOB & LEVERSET PROGRAMFEATURES♦ Contractor pack♦ Lifetime Mechanical& Finish Guarantee♦ UL Listed♦ ISO 9002PHOTOAVAILABLE FINISHES♦ OIL RUBBED BRONZE - US10B♦ DULL CHROME - US26D♦ SATIN STAINLESS STEEL - US32DFUNCTION DESCRIPTIONADA COMPLIANTBARRIER FREEPASSAGE FUNCTIONNON-KEYED LEVERSET OR KNOBSET, BOTH LEVERS OR KNOBS OPERATE THE LATCH AND AREFREE TO TURN AT ALL TIMES.UYTDNREECR WRTERSISO9002✔.LCANBRESICOMMERCIALLOCKSETSPRIVACY FUNCTIONNON-KEYED LEVERSET OR KNOBSET WITH EMERGENCY RELEASE OUTSIDE. PUSH BUTTON INSIDE.IN AN EMERGENCY, THE LOCKED DOOR CAN BE OPENED FROM OUTSIDE BY TURNING THE SLOT-TED EMERGENCY RELEASE BUTTON WITH A COIN.ENTRANCE/OFFICE FUNCTIONKEYED LOCKSET WITH FIXED LEVER OR KNOB OUTSIDE. FREE LEVER OR KNOB INSIDE. LATCHOPERATED BY EITHER LEVER OR KNOB EXCEPT WHEN INSIDE TURN BUTTON PUSHED IN, TODISENGAGE OUTSIDE LEVER OR KNOB REQUIRING KEY. ENGAGING INSIDE TURN BUTTON FIXESOUTSIDE LEVER OR KNOB AT ALL TIMES. INSIDE LEVER OR KNOB ALWAYS STAYS FREE.STOREROOM LOCK FUNCTIONFIXED LEVER OR KNOB OUTSIDE OPERATED BY KEY ONLY. OUTSIDE LEVER IS ALWAYS FIXED.INSIDE LEVER ALWAYS STAYS FREE.CLASSROOM LOCK FUNCTIONLEVER OR KNOB LOCKED OR UNLOCKED BY KEY FROM OUTSIDE. INSIDE LEVER ALWAYS STAYSFREE.SINGLE DEADBOLTSINGLE CYLINDER DEADBOLT. FULL 1” SOLID BRASS THROW WITH HARDENED STEEL ANTI-CUT RODINSIDE. LOCKED OR UNLOCKED BY KEY FROM OUTSIDE, THUMBTURN LEVER INSIDE.DOUBLE DEADBOLTDOUBLE CYLINDER DEADBOLT. FULL 1” SOLID BRASS THROW WITH HARDENED STEEL ANTI-CUTROD INSIDE. LOCKED OR UNLOCKED BY KEY ON EITHER SIDE.C’ Series — High-Tech Security —Precision-tested for use in heavy-duty residentialand light / medium duty commercial construction.Our ‘C’ keyway is fully compatible withSchlage, Baldwin, Dexter, and other ‘C’ keyways.♦ STANDARD FEATURES ♦EXPOSED TRIM: Wrought brass/bronze.LEVER: Zinc die-cast and plated.CYLINDRICAL CASE HOUSING: Steel, zinc dichromated forcorrosion resistance.KEYING: 6-pin solid brass tumbler — keyed 5-pin standard.KEYWAY: Matches Schlage ‘C’ keyway. Accepts Lori/Ilcocylinder plugs (if required).KEYING: Keyed models supplied KD standard.(KA and Master or Construction Keying are available).TAYMOR INDUSTRIES INC. ♦ APRIL 2012COMMERCIAL LOCKSETS - PAGE 1® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.FITS DOORS: 1-3/8” – 1-3/4” thick.BORE HOLES: Cylinder hole 2-1/8” - latch hole 1”.BACKSET: 2-3/4” standard; 2-3/8”, 3-3/4”, and 5” areavailable.LATCH FACE: 1-1/8” with standard 2-3/4” latch.LATCHBOLT: Solid brass or stainless steel bolt with1/2” throw, guarded (deadlatch feature).STRIKE: ASA strike is stamdard 1-1/2” x 4-7/8” x 3/32”.HANDING: Fits right-hand and left-hand doors.PACKING: Contractor Pack - 10 sets per case