Untitled - Franke

Table of Contents 

Section 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 

Corrosion Resistance Information, Nomenclature Guide, 

Care and Maintenance, Limited Buyer Warranty, 

Product Certification, Universal Installation System 

Section 2 Single Compartment Drop-in Sinks . . . . . . . . . . . . . . . . . . . . . .9 

Drawn bowls, Fabricated Bowls, Ledgeback and No Ledge, 

18 & 20 Gauge, Type 302 and Type 304, The Types of Stainless Steel 

Section 3 Classroom Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 

Drawn Bowls, 18 Gauge, Multiple Faucet Ledges to Accommodate 

a Faucet and Bubbler 

Section 4 Double Compartment Drop-in Sinks . . . . . . . . . . . . . . . . . . . .25 

Drawn Bowls, Fabricated Bowls, Ledgeback and No Ledge, 18 & 20 Gauge, 

Type 302 and Type 304, Hole Drilling Configuration Chart 

Section 5 Triple Compartment Drop-in Sinks . . . . . . . . . . . . . . . . . . . . .31 

Drawn Bowls, 18 & 20 Gauge, Ledgeback and No Ledge Models, 

Type 302 and Type 304 

Section 6 Undermount Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 

Single and Double Compartment, 5" ADA/Wheelchair Accessible and 

Standard 8" Depths, 18 Gauge 

Section 7 Vanity Basins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 

Oval and Round Profiles, With and Without Overflow, 18 Gauge, 

Drop-In, Undermount and Semi-Recessed 

Section 8 Drainboard Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 

Single and Double, Right and Left Hand Models, 18 Gauge 

Section 9 Scullery Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 

Single, Double & Triple Compartment, 14 & 16 Gauge, Square Corner 

and All Radius Coved Corner Construction, NSF Available 

Section 10 Surgical Scrub Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 

Premium, Single, Double and Triple, Access Panel for Service and Maintenance, 

18 Gauge, Hands-Free Faucet Packages and Soap Dispenser

CONTENTS 

Section 11 Wash Basins & Trough Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . .75 

Luxury Wash Basins, Clinical Hand Wash Basins, 

Wall Hung Hand Wash Basins and Troughs, Pedestal Wash Basins, 

Service Sinks, Saniguard ® Product Protection 

Section 12 Mop Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 

T316 Corrosion Resistant, 16 Gauge, 

Integral Stainless Steel Splashguard Panels 

Section 13 Sewage Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 

Anti-Splash Rim, Perforated Flushing Tube in Bowl to Minimize 

Hand Cleaning, Backsplash, 14 Gauge 

Section 14 Sacrarium Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 

Round and Rectangular Models, 20 Gauge 

Section 15 Type 316 Laboratory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 

Corrosion Resistant, Compartment Drop-In Sinks, Cup Sinks, Sculleries, 

Art Sinks, Wall Hung Basins and Drainboard Sinks 

Section 16 Urinals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121 

Stainless Steel, 18 Gauge, Waterless and 1.9 Litre Flush 

Section 17 Custom Fabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 

Fabricated Stainless Steel Products to Specification 

Section 18 Vandal-Resistant Securityware . . . . . . . . . . . . . . . . . . . . . . . .133 

General Info, Combi Units, Urinals, Hand Wash Basins, 

Service Sinks, Accessories, Shower Units, 14 Gauge 

Section 19 Quick Find Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

General Information

Corrosion Resistance Information . . . . .2 

Nomenclature Guide . . . . . . . . . . . . . . . .3 

Care and Maintenance . . . . . . . . . . . . . . .4 

Limited Buyer Warranty . . . . . . . . . . . . . .4 

Product Certification . . . . . . . . . . . . . . . .5 

Universal Installation System . . . . . . . . . .5 

Waste Fitting Options . . . . . . . . . . . . .6-7 

SECTION 1 

1 

GENERAL 

INFORMATION 

SINGLE COMPARTMENT 

DROP-IN SINKS 

CLASSROOM 

SINKS 

DOUBLE COMPARTMENT 

DROP-IN SINKS 

TRIPLE COMPARTMENT 

DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Corrosion Resistance Information 

In the presence of oxygen, stainless steel forms a protective chromium 

oxide film. This is due to the addition of chromium in excess of 11.5% 

during the alloying stage. The further addition of nickel, in excess of 7%, 

gives superior corrosion resistance to the 300 series. 

Maximum corrosion resistance is obtained with the addition of 

molybdenum to form TYPE 316, designed to resist attack under highly 

corrosive conditions. 

As implied, stainless steel requires oxygen in order to be stainless. There 

are ways to make oxygen more plentiful. For example, an acid solution 

which might otherwise corrode the steel, can be aerated to maintain the 

protective film. 

Chemical Data 

The chemical data below should be used as a guide to determine the type 

of stainless steel that will be appropriate for the application. The rating 

system denotes the level of resistance to corrosion for the different types 

of stainless steel (A = fully resistant, B = fairly resistant, C = not resistant). 

Corrosion, or rusting, often reported soon after installation, has two 

main causes: 

1. Contact Corrosion occurs when a piece of common carbon steel, 

copper, brass or other foreign material contacts the sink and destroys 

the passive protective film. 

2. Pitting or Pinhole Corrosion occurs when chlorides attack the steel 

forming pits where galvanic cells are created. Acid chlorides are 

particularly severe, but even chlorine bleach can cause failure. The 

sink should be rinsed thoroughly after such contact. Type 316 steel 

should be specified if the sink will be subject to such conditions. 

For a detailed listing of corrosive materials and steel resistance levels, 

please go to: www.kindred-commercial.com 

For applications involving chemicals or conditions not listed below, please 

consult your local Kindred Commercial sales representative. 

Substance (Conditions - strength & temperature) T316 T304 T302 

Acetic Anhydride (90%, aerated, 180 degrees F) B C C 

Aluminum Fluoride (5%, 70 degrees F) B C C 

Aluminum Sulfate (10%, boiling) A B B 

Ammonium Bromide (5%, 70 degrees F) B C C 

Ammonium Sulfate (10%, boiling) A B B 

Bleaching Powder (dry) A C C 

Butyric Acid (saturated, boiling) A B B 

Calcium Bisulfite (aqueous solution, 300 lbs. pressure, 390 degrees F) B C C 

Calcium Hydroxide (50%, boiling) B C C 

Calcium Hypochlorite (saturated, 70 degrees F) A C C 

Chloracetic Acid (70 degrees F) B C C 

Chlorine Gas (moist, 70 degrees F) B C C 

Chromic Acid (50%, boiling) B C C 

Ferric Chloride (1%, 70 degrees F) B C C 

Fluosilicic Acid (90%, 70 degrees F) B C C 

Formic Acid (10%, 180 degrees F) A C C 

Hydrochloric Acid (1% or less, 70 degrees F) B C C 

Iodine (dry, 70 degrees F) A C C 

Lactic Acid (10%, 150 degrees F) B C C 

Mercuric Chloride (2%, 70 degrees F) B C C 

Oxalic Acid (2.5%, 180 degrees F) A C C 

Phosphoric Acid (80%, 230 degrees F) B C C 

Salt Brine (70 degrees F) A C C 

Sauerkraut Brine (70 degrees F) A C C 

Sodium Hydroxide (melting, 600 degrees F) B C C 

Stannic Chloride (5%, 70 degrees F) B C C 

Sulfuric Acid (5%, 100 degrees F) A C C 

Zinc Chloride (saturated, 70 degrees F) B C C 

2 0311

Nomenclature Guide 

Drop-in Sinks 

S Single sink without faucet ledge 

AS Wheelchair accessible/ADA compliant single sink 

without faucet ledge 

LBS Ledge back single sink 

ALBS Wheelchair accessible/ADA compliant ledge back single sink 

Classroom Sinks 

LBLS Ledge back & left, single compartment 

ALBLS Wheelchair accessible/ADA compliant ledge back 

& left single compartment 

LBRS Ledge back & right, single compartment 

ALBRS Wheelchair accessible/ADA compliant ledge back & right, 

single compartment 

LBLRS Ledge back, left & right, single compartment 

ALBLRS Wheelchair accessible/ADA compliant, ledge back, 

left & right, single compartment 

Drainboard Sinks 

LBSDBR Ledge back single with drainboard on right side 

LBSDBL Ledge back single with drainboard on left side 

Scullery Sinks 

SL Classic Series, single compartment 

DL Classic Series, double compartment 

TL Classic Series, triple compartment 

SSL S-Series, single compartment 

SDL S-Series, double compartment 

STL S-Series, triple compartment 

Other 

UCS Undermount single sink 

UCD Undermount double sink 

SSU Surgical scrub station 

XINX Xinox series with satin finish 

XINH Xinox series with high polish finish 

WHB Wall hung hand wash basin 

FWHB Pedestal hand wash basin 

WT Wall hung basin 

SINGLE, CLASSROOM, DOUBLE, TRIPLE AND UNDERMOUNT SINKS 

0311 

LBDDBR Ledge back double with drainboard on right side 

LBDDBL Ledge back double with drainboard on left side 

RSL R-Series, single compartment 

RDL R-Series, double compartment 

RTL R-Series, triple compartment 

WSL W-Series, single compartment 

WDL W-Series, double compartment 

WTL W-Series, triple compartment 

WSS Wall hung service sink 

BCS Base cabinet service sink 

WTS Wall trough sink 

FSS Floor service/mop sink 

SSS Sewage sampling sink 

RS/SS Sacrarium sink 

OC/RC T316 cup sink 

CMPX Urinal 

Model Sink / Bowl Configuration Bowl Dimensions Gauge Waste Option 

Ledge? Single Width Length Depth 

Double, (Front to (Left to 

Triple? Back) Right) 

LBS6808-2 LB S 6 8 08 * -2 (3 1/2" [89mm] crumb cup 

(Ledgeback) (Single bowl) (16") (18") (8") (20 ga) with integral overflow) 

LBT8610P-1 LB T 8 6 10 P -1 (3 1/2" [89mm] crumb cup) 

(Ledgeback) (Triple bowl) (18") (16") (10") (18 ga) 

LBS9407-3 LB S 9 4 07 * -3 (1 1/2" [38mm] 

(Ledgeback) (Single bowl) (9 1/2") (14 1/2") (7") (20 ga) duplex waste assembly) 

LBLS4608P-1 LBL S 4 6 08 P -1 (3 1/2" [89mm] crumb cup) 

(Ledgeback & left) (Single bowl) (14") (16") (8") (18 ga) 

* 20 gauge unless otherwise indicated by the letter "P" for single, classroom, double, triple & undermount sinks 

D Double sink without faucet ledge 

LBD Ledge back double sink 

ALBD Wheelchair accessible/ADA compliant ledge back double sink 

T Triple sink without faucet ledge 

LBT Ledge back triple sink 

LHS Opposing ledges, left & right only, single compartment 

ALHS Wheelchair accessible/ADA compliant, opposing ledges, 

left & right only, single compartment 

LRS Ledge right side only, single compartment 

ALRS Wheelchair accessible/ADA compliant, ledge right side only, 

single compartment 

LBLDC Ledge back & left, double compartment 

LBRDC Ledge back & right, double compartment 

ART Large single sink without faucet ledge 

Vanity Basins 

V Vanity basin, no overflow OV Vanity basin, with overflow 

3 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Care and Maintenance Limited Buyer Warranty 

Kindred Commercial’s endorsement of stainless steel sinks is based on 

over 50 years of manufacturing experience. Over this time we have 

accumulated a wealth of knowledge with respect to care of this product. 

We would like to share some of this insight with you, as well as advise you 

of some recommended cleaning materials and instructions for 

maintaining our product. 

The best form of maintenance is frequent, regular cleanings. A little bit 

of cleaning on a regular basis is preferable to a major cleaning on a 

sporadic basis. The best method of preventative maintenance is to ensure 

that the sink is clean, dry and exposed to room atmosphere when not in 

use. Rinse and towel dry the sink after each use in order to minimize 

major cleanups. This is of particular importance if potentially corrosive 

chemicals were in contact with the sink. 

Keep the sink fixture free of any standing water, which may build up 

mineral deposits. The quality of your water can affect the sink’s 

appearance and this water quality will vary from building to building. 

To clean your sink, use the mildest cleaning procedure that will do the 

job effectively. On mirror finish decks we recommend using either a liquid 

detergent or Peek with a soft cloth. DO NOT USE ANY ABRASIVE 

MATERIALS ON THE MIRROR FINISH. On satin finish decks and inside 

the sink bowl we recommend using a very mild abrasive cleanser such as 

Old Dutch ® or Cameo ® . 

Always rinse the sink after using a cleaning agent, and wipe the sink dry 

to discourage any water spotting. 

Metallic scouring pads and steel wool pads must never be used to clean 

your sink or any utensils in the sink, as they will leave a residue of small 

iron particles. They may not even be readily visible, but they most 

certainly will lead to corrosion of the sink. (Non metallic Scotch-Brite ® 

scouring pads are available for this purpose.) 

For similar reasons do not leave any mild steel, or cast iron cookware or 

implements, anywhere on the sink for extended periods of time. The 

combined presence of iron and moisture with stainless steel can only 

lead to surface corrosion and staining of the sink. 

Do not leave any items in the sink overnight as they will trap water 

underneath which could lead to staining and discoloration of the sink 

surface. The unique properties of stainless steel are dependent upon 

exposure of the surface to the atmosphere. 

Never use abrasive pads or abrasive cleaners on the mirror finish deck of 

the sink. They will scratch the finish. This includes Scotch-Brite ® pads. 

Kindred Commercial recommends that Scotch-Brite ® pads be used only 

on the satin finish surfaces of the sink. 

We don’t recommend that you use chlorine bleach in your stainless steel 

sink, as chlorine will attack the protective layer that makes stainless steel 

truly stainless. The risk of damage is proportional to the concentration 

of the chlorine and the duration of exposure between the sink and 

chlorine agent. Always dilute any antibacterial product used and wipe up 

any spills. Note: some antibacterial soaps contain a chlorine compound. 

Any cleaning or scrubbing to remove stubborn stains from the inside of 

the sink bowl should follow the direction of the grain line. Any scrubbing 

across the grain will show as a scratch. Scrubbing in the same direction 

as the polish lines will blend in any surface scratches. 

Stains and water spots anywhere on the sink can be removed with a small 

amount of Peek on a damp cloth. Rub the Peek over the sink surface. 

Rinse and towel dry. 

Every Kindred Commercial sink is guaranteed to be suitable for any 

normal purpose for which it is intended and without defects in material 

or workmanship for the following periods of time, provided is has been 

installed and maintained according to Kindred Commercial’s instructions: 

• Stainless steel drop-in sinks (sections 2 - 7 in the Kindred Commercial 

catalogue): 5 year warranty 

• Custom and fabricated products: (sections 8 - 15 & 17 in the Kindred 

Commercial catalogue): 1 year warranty 

• Stainless steel urinals (section 16 in the Kindred Commercial 

catalogue): 2 year warranty 

Some provinces or states do not allow limitations on how long an implied 

warranty lasts, so the above limitations may not apply to you. 

If a sink is defective for normal purposes Kindred Commercial will provide 

to the buyer free of charge a replacement sink of equal model. A sink 

can be repaired or replaced by returning it to the place of purchase. All 

costs of such replacement shall be borne by the buyer. 

Kindred Commercial shall not be liable under this warranty where the 

sink has been used for abnormal purposes or improperly installed or has 

damage resulting from abuse such as heavy impact, dropped objects or 

otherwise. Kindred Commercial shall not be liable for any inconvenience 

or expense for material or labor related to removal or replacement of the 

defective sink, or for any loss or damage to any person or property 

whatsoever resulting from the defective sink. 

Some provinces or states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation may not 

apply to you. 

The provisions of this warranty are not transferable and are in addition 

to and not in modification of or subtraction from any applicable statutory 

warranties, rights or remedies. 

This warranty gives specific legal rights, and you may also have other 

rights which vary from province to province or state to state. 

4 0311

Product Certification Installation System 

Kindred Commercial strongly believes in product certification. We strive 

to have our products designed and certified to meet all applicable 

standards. Certification marks are important as they offer peace of mind 

to installers, specifiers and consumers alike that the product has been 

independently tested and certified to meet the recognized standards for 

safety and/or performance, of the recognized certification bodies in 

North America. 

IAPMO (International Association of Plumbing and Mechanical Officials), 

NSF and CSA (Canadian Standards Association) are among the leaders 

for Standards Development Organizations in North America. These 

organizations are accredited by ANSI American National Standards 

Institute (ANSI) and Standards Council of Canada (SCC) to certify 

plumbing fixtures. 

NEW HARMONIZED STANDARD PUBLISHED 

CSA and IAPMO, the two leading Standards Development Organizations 

entered into a joint agreement to harmonize the Canadian CSA B45.4 

and the ASME A112.19.3 series of standards into one bi-national 

standard. The agreement was designed to help streamline the testing 

and certification process for stainless steel plumbing fixtures. 

The new harmonized standards for stainless steel plumbing fixtures 

(ASME A112.19.3-2008 / CSAB45.4-08) have been published and are 

available for purchase on both the CSA and ASME websites. 

0311 

Universal Installation System (UIS) 

Kindred Commercial developed the UIS to accommodate a unique 

market preference. There are many trades people who choose to 

preinstall faucets to the sink ledge before mounting the sink into the 

countertop. This meant that a separate part number would be ordered 

to allow for this installation method. Our Product Development 

Engineers got to work on a solution to meet the different sink 

installation needs of plumbers and installers throughout North 

America. The upshot of their months of development is the Universal 

Installation System (UIS). 

The UIS allows a faucet to be pre-mounted directly to the sink deck 

before installation. The specially designed fastening system effectively 

pulls down the back ledge of the sink for a tight, secure fit. Our EZ 

Clamp system pulls down the other three sink sides for a sturdy, simple 

and efficient sink and faucet installation process from start to finish. 

These clips accommodate a wide variety of countertop thicknesses, 

from ½” to 2 ¼”. Everything you need for installing the sink is in the 

box. Another great feature is the bolt on the clips have 3 drive 

options which allows the use of power driver: 

- Robertson 

- Slot 

- Hex 3/8” 

This new mounting system is truly universal; it allows for the 

installation of the faucet either through the countertop or just through 

the sink ledge. The UIS clips have a very low profile, so they do not 

get in the way during a traditional drop-in installation. The template 

provided in the box accommodates both installation methods. 

5 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Waste Fitting Options 

6 

3 1/2" (89mm) WASTE Material Model 

T302 = 1130 

3 1/2" (89mm) crumb cup strainer indicated by suffix "-1", 

complete with 1 1/2" x 3" (38mm x 76mm) brass tailpiece 

T316 = 1120/316 

3 1/2" (89mm) crumb cup strainer indicated by suffix "-1", 

complete with 1 1/2" x 3" (38mm x 76mm) T316 stainless 

steel tailpiece 

3 1/2" (89mm) Material Model 

VANDAL RESISTANT GRID T302 = 1300G 

T316 = 1200/316G 

1 1/2" (38mm) WASTE Material Model 

T302 = 100 

1 1/2" (38mm) duplex indicated by suffix "-3", 


T316 = 200/316 

1 1/2" (38mm) duplex indicated by suffix "-3", complete with 

1 1/2" x 3" (38mm x 76mm) T316 stainless steel tailpiece 

1 1/2" (38mm) Material Model 

VANDAL RESISTANT GRID T302 = 100-NR 

T316 = 200/316-NR 

Complete with 1 1/2" x 3" (38mm x 76mm) tailpiece 

1 1/4" (32MM) GRID WASTE Material Model 

T302 = 125GWK 

1 1/4" (32mm) indicated by suffix "-7", 


1 1/4" (32MM) GRID WASTE T302 = 125GOWK 

WITH OVERFLOW 1 1/4" (32mm) indicated by suffix "-7", complete with 

1 1/4" x 3" (32mm x 76mm) brass tailpiece and overflow assembly 

Note: 1 1/4" waste fittings are not supplied with sinks. Please order separately. 

3 1/2" (89mm) OF100 (overflow components only) 

INTEGRAL OVERFLOW WASTE Indicated by suffix "-2", for 3 1/2" (89mm) wastes 

1 1/2" (38mm) OF100 (overflow components only) 

INTEGRAL OVERFLOW WASTE Indicated by suffix "-6", for 1 1/2" (38mm) wastes 

0311

Waste Fitting Options 

1 1/4" (32mm) INTEGRAL VANITY OF100-VAN (overflow components only) 

OVERFLOW WASTE Use with 1 1/4" (32mm) waste assembly 

310-1, 312-1 Size Model 

10" = 310-1 

12" = 312-1 

Standpipe for 1 1/2" (38mm) where indicated by suffix "-4" 

* only available in T302 

GUARD Use with standpipe 

Indicated by suffix "-5" waste option 

315-7 Tailpiece locknut 

315-9/316 1 1/2" x 3" (38mm x 76mm) tailpiece (T316) 

315-8 Tailpiece gasket 

OF-VR Vandal-resistant overflow tube 

0311 7 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

8 

Single Compartment Drop-in Sinks

• Less faucet ledge, 18 and 20 gauge 

• With faucet ledge, 18 and 20 gauge 

• ADA/Wheelchair accessible models 

• 5" to 14" bowl depths 

• 20 gauge, T302 

• 18 gauge, T304 

SECTION 2 

9 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Single Compartment Drop-in Sinks Less faucet ledge 20 Gauge 

A 

E 

C 

S9106-1 SHOWN 

D 

B 

SPECIFICATION: 

Single compartment sink less faucet ledge. 20 gauge, type 302, 18-8 

stainless steel. Self-rimming. Exposed surfaces are satin finished. 

Undercoated to reduce condensation and resonance. Complete with 

factory applied rim seal, installation hardware, cutout template and 

waste assembly. 

WASTE SIZE: (Indicated in model number, eg. S9106-1) 

-1 = 3 1/2" (89mm) crumb cup waste assembly 

-3 = 1 1/2" (38mm) duplex waste assembly 

WASTE LOCATION: 

C = center 

CB = center back 

NOTES: 

• Electronic specifications, reference www.kindred-commercial.com 

• T316 equivalents available for some models. Please see Section 15. 

OVERALL DIMENSIONS SINK COMPARTMENT DIMENSIONS 

CAN A B C D E WASTE FAUCET HOLE 

ADA MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) LOCATION OPTIONS 

• S9106-1 11 1/4" (29cm) 13 5/8" (35cm) 9 1/4" (24cm) 11 5/8" (30cm) 6" (15cm) C N/A 

• S9106-3 11 1/4" (29cm) 13 5/8" (35cm) 9 1/4" (24cm) 11 5/8" (30cm) 6" (15cm) C N/A 

• S4206-1 16 1/8" (41cm) 14 1/8" (36cm) 14" (36cm) 12" (30cm) 6" (15cm) CB N/A 

S9407-1 11 5/8" (30cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 7" (18cm) C N/A 

S6408-1 18 1/8" (46cm) 16 1/8" (41cm) 16" (41cm) 14" (36cm) 8" (20cm) CB N/A 

S6808-1 18 1/8" (46cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 8" (20cm) CB N/A 

S6810-1 18 1/8" (46cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 10" (25cm) C N/A 

S7308-1 19 5/8" (50cm) 25 5/8" (65cm) 17 1/2" (44cm) 23 1/2" (60cm) 8" (20cm) C N/A 

10 0311

Single Compartment Drop-in Sinks Less faucet ledge 18 Gauge 

0311 

A 

C 

E 

S8014P-1 SHOWN 

D 

B 





factory applied rim seal, installation hardware, cutout template and 

waste assembly. 

WASTE SIZE: (Indicated in model number, eg. S6410P-1) 



with integral overflow kit 


C = center 


NOTES: 


• Model numbers beginning with A signify product meets ADA 

compliance. The model as constructed is subject to the interpretation 

of local building codes. Check ADA, local wheelchair accessibility 

guidelines and local building codes to ensure the unobstructed knee 

space is achieved after installation. 





S6410PCB-1 18 1/8" (46cm) 16 1/8" (41cm) 16" (41cm) 14" (36cm) 10" (25cm) CB N/A 

• • AS6105P-1 18 1/8" (46cm) 23 1/8" (59cm) 16" (41cm) 21" (53cm) 5" (13cm) CB N/A 

S6108P-1 18 1/8" (46cm) 23 1/8" (59cm) 16" (41cm) 21" (53cm) 8" (20cm) CB N/A 

S7310P-1 19 1/4" (49cm) 25 1/4" (64cm) 17" (43cm) 23" (58cm) 10" (25cm) CB N/A 

S7312P-1 19 5/8" (50cm) 25 5/8" (65cm) 17 1/2" (44cm) 23 1/2" (60cm) 12" (30cm) C N/A 



S8014P-1 20 1/8" (51cm) 22 1/8" (56cm) 18" (46cm) 20" (51cm) 14" (36cm) C N/A 

S2214P-1 24" (61cm) 24" (61cm) 22" (56cm) 22" (56cm) 14" (36cm) C N/A 

11 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Single Compartment Drop-in Sinks With faucet ledge 20 Gauge 

A 

C 

E 

LBS2708-1 SHOWN 

D 

B 


Single compartment sink with faucet ledge. 20 gauge, type 302, 18-8 



factory applied rim seal, Universal Installation System hardware, cutout 

template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. LBS9106-1) 






C = center 


LR = left rear 

FAUCET HOLE OPTIONS (STANDARD): 

When ordering a model number, indicate which faucet hole option is 

required by adding the following to the end of the model number; (eg. 

LBS9106-1/2) 

/1 = 1 hole, 1 1/2" diameter, centered over waste 

/2 = 2 hole, 4" centerset, 1 1/2" diameter, centered over waste 


/4 = 4 hole, as 3 hole above, plus 1 hole 4" to the right 

CUSTOM FAUCET HOLES: 

Custom faucet hole drillings are available on all models. Order model 

as indicated in chart below, specifying all necessary hole drilling 

information. Sinks with custom drillings are non-returnable. 

NOTES: 







• For more information on faucet hole options, reference chart on 

page 29. 





• LBS9106-1 13 3/4" (35cm) 13 5/8" (35cm) 9 1/4" (23cm) 11 5/8" (30cm) 6" (15cm) C 1, 2 

• LBS9106-3 13 3/4" (35cm) 13 5/8" (35cm) 9 1/4" (23cm) 11 5/8" (30cm) 6" (15cm) C 1, 2 

• LBS1306-1 15 7/16" (39cm) 15 1/8" (38cm) 11" (28cm) 13" (33cm) 6" (15cm) C 1, 2 

LBS9407-1 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 7" (18cm) C 1, 2 

LBS9407-3 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 7" (18cm) C 1, 2 

LBS2708-1 17" (43cm) 19 1/8" (49cm) 12" (30cm) 17" (43cm) 8" (20cm) C 1, 3 

LBS4607-1 18 13/16" (47cm) 18 1/8" (46cm) 14" (36cm) 16" (41cm) 7" (18cm) C 1, 3 

• • ALBS6405-1 20 9/16" (52cm) 16 1/8" (41cm) 16" (41cm) 14" (36cm) 5" (13cm) CB 1, 3 

• • ALBS6805-1 20 9/16" (52cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 5" (13cm) LR 1, 3 

LBS6807-1 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 7" (18cm) CB 1, 3 




LBS6810-1 20 9/16" (52cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 10" (25cm) C 1, 3 

LBS7508-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 8" (20cm) CB 1, 3 

LBS7308-1 22" (56cm) 25 1/4" (64cm) 17" (43cm) 23" (58cm) 8" (20cm) CB 1, 3, 4 

12 0311


0311 

A 

E 

C 

LBS2708P-1 SHOWN 

D 

B 


Single compartment sink with faucet ledge. 18 gauge, type 304, 

18-10 stainless steel. Self-rimming. Exposed surfaces are satin finished. 


factory applied rim seal, Universal Installation System hardware, 

cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. ALBS9405P-1) 






C = center 






ALBS9405P-1/2) 

/1 = 1 hole, 1 1/2" diameter, centered over waste 





Custom faucet hole drillings are available on all models. Order model 

as indicated in chart below, specifying all necessary hole drilling 

information. Sinks with custom drillings are non-returnable. 

NOTES: 








page 29. 





• • ALBS9405P-1 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 5" (13cm) C 1, 2 

• ALBS9406P-1 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 6" (15cm) C 1, 2 

LBS9408P-1 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 8" (20cm) C 1, 2 

• • ALBS1305P-1 15 7/16" (39cm) 15 1/8" (38cm) 11" (28cm) 13" (33cm) 5" (13cm) C 1, 2 

• ALBS1306P-1 15 7/16" (39cm) 15 1/8" (38cm) 11" (28cm) 13" (33cm) 6" (15cm) C 1, 2 

LBS1308P-1 15 13/16" (40cm) 15 1/8" (38cm) 11" (28cm) 13" (33cm) 8" (20cm) C 1, 2 

• • ALBS4405P-1 18 13/16" (48cm) 16 1/8" (41cm) 14" (36cm) 14" (36cm) 5" (13cm) CB 1, 3 

• ALBS4406P-1 18 13/16" (48cm) 16 1/8" (41cm) 14" (36cm) 14" (36cm) 6" (15cm) CB 1, 3 

LBS4408P-1 18 13/16" (48cm) 16 1/8" (41cm) 14" (36cm) 14" (36cm) 8" (20cm) CB 1, 3 


• • ALBS2705P-1 17" (43cm) 19 1/8" (49cm) 12" (30cm) 17" (43cm) 5" (13cm) C 1, 3 

• ALBS2706P-1 17" (43cm) 19 1/8" (49cm) 12" (30cm) 17" (43cm) 6" (15cm) C 1, 3 

LBS2708P-1 17" (43cm) 19 1/8" (49cm) 12" (30cm) 17" (43cm) 8" (20cm) C 1, 3 

• • ALBS4605P-1 18 13/16" (48cm) 18 1/8" (46cm) 14" (36cm) 16" (41cm) 5" (13cm) C 1, 3 

• ALBS4606P-1 18 13/16" (48cm) 18 1/8" (46cm) 14" (36cm) 16" (41cm) 6" (15cm) C 1, 3 

LBS4608P-1 18 13/16" (48cm) 18 1/8" (46cm) 14" (36cm) 16" (41cm) 8" (20 cm) C 1, 3 

... Continued on page 14 

13 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


14 0311 

A 

C 

E 

D 

B 

... Continued from page 13 












LBS6410PCB-1 20 9/16" (52cm) 16 1/8" (41cm) 16" (41cm) 14" (36cm) 10" (25cm) CB 1, 3 

• • ALBS6805P-1 20 9/16" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 5" (13cm) LR 1, 3 

• ALBS6806P-1 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 6" (15cm) CB 1, 3 

LBS6808P-1 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 8" (20cm) CB 1, 3 


• • ALBS7505P-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 5" (13cm) CB 1, 3 

• ALBS7506P-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 6" (15cm) CB 1, 3 

LBS7508P-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 8" (20cm) CB 1, 3 

LBS7510P-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 10" (25cm) CB 1, 3 









• • ALBS7305P-1 22 1/16" (56cm) 25 5/8" (65cm) 17" (43cm) 23" (58cm) 5" (13cm) CB 1, 3, 4 

• ALBS7306P-1 22 1/16" (56cm) 25 5/8" (65cm) 17" (43cm) 23" (58cm) 6" (15cm) CB 1, 3, 4 

LBS7308P-1 22 1/16" (56cm) 25 5/8" (65cm) 17" (43cm) 23" (58cm) 8" (20cm) CB 1, 3, 4 

LBS7310P-1 22 1/16" (56cm) 25 5/8" (65cm) 17" (43cm) 23" (58cm) 10" (25cm) CB 1, 3, 4 

LBS7312P-1 22 1/16" (56cm) 25 5/8" (65cm) 17 1/2" (44cm) 23 1/2" (60cm) 12" (30cm) C 1, 3, 4 

LBS7312P-2 22 1/16" (56cm) 25 5/8" (65cm) 17 1/2" (44cm) 23 1/2" (60cm) 12" (30cm) C 1, 3, 4 

LBS7314P-1 22 9/16" (57cm) 25 5/8" (65cm) 17 1/2" (44cm) 23 1/2" (60cm) 14" (36cm) C 1, 3 

• • ALBS7805P-1 22" (56cm) 30 1/8" (77cm) 17" (43cm) 28" (71cm) 5" (13cm) CB 1, 3, 4 

• ALBS7806P-1 22" (56cm) 30 1/8" (77cm) 17" (43cm) 28" (71cm) 6" (15cm) CB 1, 3, 4 

LBS7808P-1 22" (56cm) 30 1/8" (77cm) 17" (43cm) 28" (71cm) 8" (20cm) CB 1, 3, 4 

LBS8014P-1 23 1/8" (59cm) 22 1/8" (56cm) 18" (46cm) 20" (51cm) 14" (36cm) C 1, 3

The Types of Stainless Steel 

Stainless steel is well suited to commercial applications. The properties of 

stainless steel are such that is hard wearing, hygienic, easy to clean, heat 

resistant, rust resistant, and as the name implies, stainless. And stainless 

steel can not chip, fade or wear off like other materials such as porcelain 

or enamel coated products. 

Stainless steel is available in many gauges, compositions and finishes. 

20 gauge, 18-8 stainless steel 

• A good quality steel with 18% chromium and 8% nickel content. 

This type of stainless steel is typically used for sinks that are 

8" deep or less 

18 gauge, 18-10 stainless steel 

• A heavier weight stainless with 18% chromium, and 10% nickel. This 

type of stainless steel results in the ability to draw a deeper sink bowl 

14 and 16 gauge stainless steel 

• Most often used in fabrication of institutional sinks such as kitchen 

sculleries, wallmount washup sinks, mop and service sinks. 

Kindred Commercial Vandal-Resistant Securityware products are 

fabricated from heavy duty 14 gauge stainless steel for the utmost in 

durability. See Section 18 of this catalogue for more information on 

our line of Securityware products. 

Type 316 stainless steel 

• A corrosion resistant steel, and is intended for applications such as 

labs where acids and other corrosive materials are present. 

Bowl Finishes 

Bowl finishes on Kindred Commercial product range from brush to satin. 

A brush finish, typically found on vanity basin bowls is easy to clean and 

has a soft luster. A satin finish is somewhat more aggressive, with a 

definite grain line. This type of finish is practical, particularly in a heavy 

use application, as any scratches may be blended into the grain line. 

Deck Finishes 

Kindred Commercial products have two distinct finishes by product type. 

Our vanity basins have a mirror deck finish, which is very bright and 

shiny. This finish is the most common on faucets and soap dispensers 

used in public washrooms. 

All of our other commercial products have a satin finish deck, which will 

stand up to the rigors of time and repeated use, and the natural grain of 

the steel will disguise any scratches acquired from use. 

0311 

15 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

16 

Classroom Sinks

• Multiple faucet ledge configurations 

• 5" and 6" ADA/wheelchair accessible models 

• 8" depth 

• 18 gauge, T304 

• Drawn bowls 

• Vandal resistant bubbler holes 

SECTION 3 

17 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS



All single bowl Classroom sinks are designed with multiple faucet ledge configurations to accommodate a faucet and drinking bubbler. 18 gauge, 

type 304, 18-10 stainless steel. Self rimming. Exposed surfaces are satin finished. Undercoated to reduce condensation and resonance. Complete 

with factory applied rim seal, Universal Installation System hardware, cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. ALBLS4605P-1) 


For a 3 1/2" (89mm) vandal-resistant grid strainer, order separately using part number 1300G. 


C = center 



When ordering a model number, indicate which faucet hole option is required by adding the # of holes required to the end of the model number; 

(eg. ALBLS4605P-1/2) 

See standard options by model. 


Custom faucet hole drillings are available on all models. For custom drillings, order model as indicated in diagram and specify details of faucet holes 

required when ordering. Sinks with custom drillings are non-returnable. 

NOTES: 


• Model numbers beginning with A signify product meets ADA compliance. The model as constructed is subject to the interpretation of local 

building codes. Check ADA, local wheelchair accessibility guidelines and local building codes to ensure the unobstructed knee space is achieved 

after installation. 

• For more information on faucet hole options, reference chart on page 23. 

Ledges – Back & Left 

A 

C 

E 

D 

B 

STANDARD HOLE DRILLING CONFIGURATIONS 

ø1 1/2" (38mm) 

ø1 1/8" 

(29mm) 

/2 

ø1 1/8" 

(29mm) 

/4 

1 hole 

3 hole, 8" centerset 

bubbler hole on left ledge 


18 0311 

1 

ø1 1/2" 

(38mm) 

BUBBLER HOLE DETAIL 

ø1 1/8" 

(29mm) 

3 

8" (204mm) 




• • ALBLS4605P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 5" (13cm) C 2, 4 

• ALBLS4606P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 6" (15cm) C 2, 4 

LBLS4608P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 8" (20cm) C 2, 4 

ALBLS6406P-1 20 9/16" (52cm) 18 9/16" (47cm) 16" (41cm) 14" (36cm) 6" (15cm) CB 2, 4 

LBLS6408P-1 20 9/16" (52cm) 18 9/16" (47cm) 16" (41cm) 14" (36cm) 8" (20cm) CB 2,4 

• • ALBLS7005P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 5" (13cm) CB 2, 4 

• ALBLS7006P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 6" (15cm) CB 2, 4 

LBLS7008P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 8 1/8" (21cm) CB 2, 4 

ø 

ø1 1/2" 

(38mm)


Ledges – Back & Right 

0311 

A 

C 

E 

D 

B 

Ledges – Back, Left & Right 

A 

C 

E 

D 

B 

1 

C 

STANDARD HOLE DRILLING CONFIGURATIONS: 

C 

ø1 1/2" (38mm) 

/2 /4 

1 hole 

bubbler hole on right ledge 

ø1 1/8" 

(29mm) 

8" (204mm) 

ø1 1/2" 

(38mm) 



ø1 1/2" (38mm) 

ø1 1/2" (38mm) 

ø1 1/8" 

(29mm) 

8" (204mm) 

ø1 1/2" 

(38mm) 

/3R 

/5R 

2 single holes 3 hole, 8" centerset, 1 hole left 

bubbler hole right ledge 


ø1 1/8" 

(29mm) 





• • ALBRS4605P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 5" (13cm) C 2, 4 

• ALBRS4606P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 6" (15cm) C 2, 4 

LBRS4608P-1 18 13/16" (48cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 8" (20cm) C 2, 4 

• • ALBRS7005P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 5" (13cm) CB 2, 4 

• ALBRS7006P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 6" (15cm) CB 2, 4 

LBRS7008P-1 21 13/16" (55cm) 24 13/16" (63cm) 17" (43cm) 20" (51cm) 8" (20cm) CB 2, 4 

ø1 1/2" 

(38mm) 



ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

8" (204mm) 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

/3L 

/5L 

2 single holes 3 hole, 8" centerset, 1 hole right 

bubbler hole left ledge 





• • ALBLRS7005P-1 21 13/16" (55cm) 27 1/2" (70cm) 17" (43cm) 20" (51cm) 5" (13cm) CB 3R, 3L, 5R, 5L 

• ALBLRS7006P-1 21 13/16" (55cm) 27 1/2" (70cm) 17" (43cm) 20" (51cm) 6" (15cm) CB 3R, 3L, 5R, 5L 

LBLRS7008P-1 21 13/16" (55cm) 27 1/2" (70cm) 17" (43cm) 20" (51cm) 8" (20cm) CB 3R, 3L, 5R, 5L 

19 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


Ledges – Opposing 

Ledges – Right 

A 

E 

C 

D 

B 

A 

E 

C 

D 

B 

ø1 1/2" 

(38mm) 


/ 


ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

/2R /4R 

1 hole 


8" 

(204mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 



ø1 1/8" 

(29mm) 

/2L 

ø1 1/8" 

(29mm) 

/4L 

1 hole 



1 bubbler hole on left ledge 

/2DR 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

/2DL 

Diagonal Punching Diagonal Punching 

1 hole 1 hole 

bubbler hole on right ledge bubbler hole on left ledge 




• • ALHS6405P-1 18 1/8" (46cm) 21 1/2" (55cm) 16" (41cm) 14" (36cm) 5" (13cm) C 2R, 2L, 4R, 4L, 2DR, 2DL 

• ALHS6406P-1 18 1/8" (46cm) 21 1/2" (55cm) 16" (41cm) 14" (36cm) 6" (15cm) CB 2R, 2L, 4R, 4L, 2DR, 2DL 

LHS6408P-1 18 1/8" (46cm) 21 1/2" (55cm) 16" (41cm) 14" (36cm) 8" (20cm) CB 2R, 2L, 4R, 4L, 2DR, 2DL 


• ALHS4606P-1 16 1/8" (41cm) 23 1/2" (60cm) 14" (36cm) 16" (41cm) 6" (15cm) C 2R, 2L, 4R, 4L, 2DR, 2DL 

LHS4608P-1 16 1/8" (41cm) 23 1/2" (60cm) 14" (36cm) 16" (41cm) 8" (20cm) C 2R, 2L, 4R, 4L, 2DR, 2DL 


• ALHS8606P-1 20 1/8" (51cm) 23 1/2" (60cm) 18" (46cm) 16" (41cm) 6" (15cm) C 2R, 2L, 4R, 4L, 2DR, 2DL 

LHS8608P-1 20 1/8" (51cm) 23 1/2" (60cm) 18" (46cm) 16" (41cm) 8" (20cm) C 2R, 2L, 4R, 4L, 2DR, 2DL 

• • ALHS7305P-1 19 1/8" (49cm) 30 1/2" (77cm) 17" (43cm) 23" (58cm) 5" (13cm) CB 2R, 2L, 4R, 4L, 2DR, 2DL 

• ALHS7306P-1 19 1/8" (49cm) 30 1/2" (77cm) 17" (43cm) 23" (58cm) 6" (15cm) CB 2R, 2L, 4R, 4L, 2DR, 2DL 

LHS7308P-1 19 1/8" (49cm) 30 1/2" (77cm) 17" (43cm) 23" (58cm) 8" (20cm) CB 2R, 2L, 4R, 4L, 2DR, 2DL 


ø1 1/2" 

(38mm) 

/1 /2 

1 hole 2 hole, 4" centerset 

4" 

(102mm) 

ø1 1/2" 

(38mm) 

/3 





• • ALRS4605P-1 16 1/8" (41cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 5" (13cm) C 1, 2, 3 

• ALRS4606P-1 16 1/8" (41cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 6" (15cm) C 1, 2, 3 

LRS4608P-1 16 1/8" (41cm) 20 13/16" (53cm) 14" (36cm) 16" (41cm) 8" (20cm) C 1, 2, 3 

20 0311 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

8" 

(204mm) 

ø1 1/2" 

(38mm) 

8" 

(204mm) 

ø1 1/2" 

(38mm)



Double classroom sinks are designed with multiple faucet ledges to accommodate a faucet and drinking bubbler. Drinking bubbler hole is on smaller 

sink bowl. 18 gauge, type 304, 18-10 stainless steel. Self rimming. Exposed surfaces are satin finished. Undercoated to reduce condensation and 

resonance. Complete with factory applied rim seal, installation hardware, cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. ALBLS4605P-1) 


For a 3 1/2" (89mm) vandal-resistant grid strainer, order separately using part number 1300G. 


C = center 



When ordering a model number, indicate which faucet hole option is required by adding the # of holes required to the end of the model number; 

(eg. LBLDC1737P-1/2) 

See standard options by model. 


Custom faucet hole drillings are available on all models. For custom drillings, order model as indicated in diagram and specify details of faucet holes 

required when ordering. Sinks with custom drillings are non-returnable. 

NOTES: 


Multiple bowls 

0311 

A F 

H 

G 

B 

D 

C 

E 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 


ø1 1/2" (38mm) 

OVERALL DIM. LARGE SINK COMPARTMENT DIM. SMALL SINK COMPARTMENT DIM. 

CAN A B C D E F G H WASTE FAUCET HOLE 

ADA MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) (F-B) (L-R) (DEPTH) LOCATION OPTIONS 

• • LBRDC1737P-1 17" (43cm) 37" (94cm) 12" (30cm) 17" (43cm) 8" (20cm) 14" (36cm) 9 1/2" (24cm) 5" (13cm) C 1, 2, 3 

• • LBLDC1737P-1 17" (43cm) 37" (94cm) 12" (30cm) 17" (43cm) 8" (20cm) 14" (36cm) 9 1/2" (24cm) 5" (13cm) C 1, 2, 3 

• • LBRDC1943P-1 19" (49cm) 43" (109cm) 17" (43cm) 20" (51cm) 6" (15cm) 14 1/2" (37cm) 9 1/2" (24cm) 5" (13cm) CB, C 1, 2, 3 

• • LBLDC1943P-1 19" (49cm) 43" (109cm) 17" (43cm) 20" (51cm) 6" (15cm) 14 1/2" (37cm) 9 1/2" (24cm) 5" (13cm) CB, C 1, 2, 3 

/1 

1 hole 

/3 

3 hole 8" centerset 

8" (204mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

/2 


4" (102mm) ø1 1/2" 

(38mm) 

21 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


C 

E 

D 

B 

A 

Art Room Sinks 



stainless steel. Exposed surfaces are satin finished. Undercoated to 

reduce condensation and resonance. Installation hardware and waste 

assembly included. 

WASTE SIZE: (Indicated in model number, eg. ART36-1) 


-3C = 1 1/2" (38mm) duplex waste assembly 


C = center 

NOTES: 






ART36-1 19" (48cm) 38" (96cm) 17" (43cm) 36" (92cm) 8" (20cm) C N/A 

ART36-3C 19" (48cm) 38" (96cm) 17" (43cm) 36" (92cm) 8" (20cm) C N/A 





22 0311

Classroom Sinks Hole Drilling Configurations 

ø1 1/2" 

(38mm) 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

0311 

/ 

ø1 1/2" 

(38mm) 

CLASSROOM - LRS SERIES 

/1 /2 


ø1 1/2" (38mm) 

/1 

1 hole 

/3 


4" 

(102mm) 

ø1 1/2" 

(38mm) 

CLASSROOM - LBLDC SERIES 

8" (204mm) 

CLASSROOM - LBLS SERIES 

C 

ø1 1/2" (38mm) 

8" (204mm) 

ø1 1/8" 

(29mm) 

/2 

ø1 1/8" 

(29mm) 

/4 

1 hole 


bubbler hole 

1 

on left ledge 


8" (204mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

CLASSROOM - LBRS SERIES ø 

Sø1 

1/2" (38mm) 

8" (204mm) ø1 1/2" 

(38mm) 

1 

/2 

3 

/4 

1 hole 




ø1 1/2" (38mm) 

/1 

1 hole 

/3 


ø1 1/8" 

(29mm) 

CLASSROOM - LBRDC SERIES 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 4" (102mm) 

(38mm) 

/3 


/2 


/2 


ø1 1/8" 

(29mm) 

8" 

(204mm) 

ø1 1/2" 

(38mm) 

ø1 1/8" 

(29mm) 

4" (102mm) ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

CLASSROOM - LHS SERIES 

ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

/2R /4R 

1 hole 


8" 

(204mm) 

ø1 1/8" 

(29mm) 



ø1 1/8" 

(29mm) 

/2L 

ø1 1/8" 

(29mm) 

/4L 

1 hole 



1 bubbler hole on left ledge 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

/2DR 

ø1 1/8" 

(29mm) 

/2DL 

Diagonal Punching Diagonal Punching 

1 hole 1 hole 

bubbler hole on right ledge bubbler hole on left ledge 

ø1 1/2" 

(38mm) 

CLASSROOM - LBLR SERIES 

ø1 1/2" (38mm) 

/3R 

/5R 

2 single holes 3 hole, 8" centerset, 1 hole left 



/3L 

ø1 1/2" (38mm) 

ø1 1/2" 

(38mm) 

ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

8" (204mm) 

8" (204mm) 

ø1 1/2" 

(38mm) 

/5L 

ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

2 single holes 3 hole, 8" centerset, 1 hole right 



ø1 1/2" 

(38mm) 


ø1 1/8" 

(29mm) 

ø1 1/8" 

(29mm) 

ø1 1/2" 

(38mm) 

8" 

(204mm) 

ø1 1/2" 

(38mm) 

ø1 1/8" 

(29mm) 

23 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

24 

Double Compartment Drop-in Sinks



• ADA/Wheelchair accessible 

models available 

• 20 gauge, T302 

• 18 gauge, T304 

SECTION 4 

25 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Double Compartment Drop-in Sinks Less faucet ledge 

A 

E 

C 

D 

D6408-1 SHOWN 

B 

D 


Double compartment sink less faucet ledge. 20 gauge, type 302 and 18 

gauge, type 304, 18-10 stainless steel. Self rimming. Exposed surfaces 

are satin finished. Spillway ® between bowls (not all models). Undercoated 

to reduce condensation and resonance. Complete with factory applied 

rim seal, installation hardware, cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. D1906-1) 



C = center 


NOTES: 


*Indicates model with Spillway ® partition 

20 GAUGE 




• D1906-1 13 3/4" (35cm) 21 11/16" (55cm) 11 5/8" (30cm) 9 1/4" (23cm) 6" (15cm) C N/A 

D6408-1* 18 7/16" (47cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 8" (20cm) CB N/A 

D8610-1 20 1/8" (51cm) 35 1/4" (90cm) 18" (46cm) 16" (41cm) 10" (25cm) C N/A 

18 GAUGE 




D6410PCB-1 18 1/8" (46cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 10" (25cm) CB N/A 

D0814P-1 22" (56cm) 39" (99cm) 20" (51cm) 18" (46cm) 14" (36cm) C N/A 

26 0311

Double Compartment Drop-in Sinks With faucet ledge 20 Gauge 

0311 

A 

E 

C 

LBD6408P-1 SHOWN 

D 

B 

D 


Double compartment sink with faucet ledge. 20 gauge, type 302, 18-8 

stainless steel. Self rimming. Exposed surfaces are satin finished. Spillway ® 

between bowls (not all models). Undercoated to reduce condensation 

and resonance. Complete with factory applied rim seal, Universal 

Installation System hardware, cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. ALBD6405-1) 







ALBD6405-1/3) 

/1 = 1 hole, 1 1/2" diameter, centered over partition 

/3 = 3 hole, 8" centerset, 1 1/2" diameter, 

centered over partition 



Custom faucet hole drillings are available on all models. Order model as 

indicated in chart, specifying # of holes required. Custom sinks are 

non-returnable. 

NOTES: 







• For more information on faucet hole options, reference chart on page 29. 



20 GAUGE 




• • ALBD6405-1* 20 1/2" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 5" (13cm) CB 1, 3, 4 

LBD6407-1* 20 1/2" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 7" (18cm) CB 1, 3, 4 

LBD6408-1* 20 1/2" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 8" (20cm) CB 1, 3, 4 

LBD6808-1 20 9/16" (52cm) 39 3/16" (100cm) 16" (41cm) 18" (46cm) 8" (20cm) CB 1, 3, 4 

LBD7508-1* 22" (56cm) 33 1/4" (84cm) 17" (43cm) 15" (38cm) 8" (20cm) CB 1, 3, 4 

27 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Double Compartment Drop-in Sinks With faucet ledge 18 Gauge 

A 

E 

C 

LBD4410P-1 SHOWN 

D 

B 

D 


Double compartment sink with faucet ledge. 18 gauge, type 304, 18-10 

stainless steel. Self rimming. Exposed surfaces are satin finished. Spillway ® 

between bowls (not all models). Undercoated to reduce condensation 

and resonance. Complete with factory applied rim seal, Universal 

Installation System hardware, cutout template and waste assembly. 

WASTE SIZE: (Indicated in model number, eg. LBD1308P-1) 


-2 = 3 1/2" (89mm) crumb cup waste assembly, 

with integral overflow 


C = center 





LBD1308P-1/3) 

/1 = 1 hole, 1 1/2" diameter, centered over partition 

/3 = 3 hole, 8" centerset, 1 1/2" diameter, 




Custom faucet hole drillings are available on all models. Order model as 

indicated in chart, specifying # of holes required. Custom sinks are 

non-returnable. 

NOTES: 








page 27. 





• • ALBD1305P-1 15 13/16" (40cm) 29 1/4" (74cm) 11" (28cm) 13" (33cm) 5" (13cm) C 1, 3, 4 

• ALBD1306P-1 15 13/16" (40cm) 29 1/4" (74cm) 11" (28cm) 13" (33cm) 6" (15cm) C 1, 3, 4 

LBD1308P-1 15 13/16" (40cm) 29 1/4" (74cm) 11" (28cm) 13" (33cm) 8" (20cm) C 1, 3, 4 

• • ALBD4405P-1* 18 13/16" (48cm) 31 1/4" (79cm) 14" (36cm) 14" (36cm) 5" (13cm) CB 1, 3, 4 

• ALBD4406P-1* 18 13/16" (48cm) 31 1/4" (79cm) 14" (36cm) 14" (36cm) 6" (15cm) CB 1, 3, 4 

LBD4408P-1* 18 13/16" (48cm) 31 1/4" (79cm) 14" (36cm) 14" (36cm) 8" (20cm) CB 1, 3, 4 


• • ALBD6405P-1* 20 1/2" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 5" (13cm) CB 1, 3, 4 

• ALBD6406P-1* 20 1/2" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 6" (15cm) CB 1, 3, 4 


LBD6410PCB-1* 20 9/16" (52cm) 31 1/4" (79cm) 16" (41cm) 14" (36cm) 10" (25cm) CB 1, 3, 4 

• • ALBD7505P-1* 22" (56cm) 33 1/4" (84cm) 17" (43cm) 15" (38cm) 5" (13cm) CB 1, 3, 4 

• ALBD7506P-1* 22" (56cm) 33 1/4" (84cm) 17" (43cm) 15" (38cm) 6" (15cm) CB 1, 3, 4 

LBD7508P-1* 22" (56cm) 33 1/4" (84cm) 17" (43cm) 15" (38cm) 8" (20cm) CB 1, 3, 4 

LBD7510P-1* 22" (56cm) 33 1/4" (84cm) 17" (43cm) 15" (38cm) 10" (25cm) CB 1, 3, 4 

LBD7412P-1 22 1/16" (56cm) 50 1/4" (128cm) 17 1/2" (44cm) 23 1/2" (60cm) 12" (30cm) C 1, 3, 4 

LBD7412P-2 22 1/16" (56cm) 50 1/4" (128cm) 17 1/2" (44cm) 23 1/2" (60cm) 12" (30cm) C 1, 3, 4 

LBD0814P-1 25" (64cm) 39" (99cm) 20" (51cm) 18" (46cm) 14" (36cm) C 1, 3, 4 

28 0311

Drop-in Sinks Hole Drilling Configurations 

0311 

/ 

ø1 1/2" 

(38mm) 

SINGLE LEDGEBACK 

4" (102mm) 

/1 /2 


ø 

ø1 1/2" (38mm) 

ø1 1/2" 

(38mm) 

DOUBLE LEDGEBACK 

8" (204mm) 

/1 /3 


12" (306mm) 

ø1 1/2" (38mm) 

/4 

3 hole, 8" centerset, plus 1 hole 4" to the right 

TRIPLE LEDGEBACK 

/1 

1 hole 

8" (204mm) 

ø1 1/2" (38mm) 

/3 


12" (306mm) 

ø1 1/2" 

(38mm) 

ø1 1/2" (38mm) 

/4 

3 hole, 8" centerset, plus 1 hole 4" to the right 

8" (204mm) 

/3 


ø1 1/2" 

(38mm) 

ø1 1/2" 

(38mm) 

29 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

30 

Triple Compartment Drop-in Sinks

• Drawn bowls 

• 7" and 10" bowl depths 

• Type 302 and type 304 



SECTION 5 

31 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Triple Compartment Drop-in Sinks 

20 1/8˝ [51cm] 

18 1/8˝ [46cm] 

16˝ [41cm] 

10˝ 

[25cm] 

18˝ [46cm] 

10˝ [25cm] 

14˝ [36cm] 

16˝ [41cm] 

14˝ [36cm] 

46 3/8˝ [118cm] 

52 3/8˝ [133cm] 

14˝ [36cm] 

10 1/16˝ 

[26cm] 

9 1/16˝ 

[23cm] 

T6410PCB-1 


Triple compartment sink less faucet ledge. 18 gauge, type 304, 

18-10 stainless steel. Self rimming. Exposed surfaces are satin finished. 


factory applied rim seal, installation kit and 3 1/2" (89mm) crumb cup 

waste assembly, location center back. 

COMPARTMENT SIZE: 16" x 14" x 10" (41cm x 36cm x 25cm) 

OVERALL SIZE: 18 1/8" x 46 3/8" (46cm x 118cm) 

NOTES: 


T8610-1 


Triple compartment sink less faucet ledge. 20 gauge, type 302, 



factory applied rim seal, installation kit and 

3 1/2" (89mm) crumb cup waste assembly, location center. 



NOTES: 


32 0311


0311 

20 9/16” 

[52cm] 

7” 

[18cm] 

20 9/16˝ 

[52cm] 

16˝ 

[41cm] 

10˝ 

[25cm] 

14” [36cm] 14” [36cm] 14” [36cm] 

46 3/8” [118cm] 

14˝ [36cm] 

14˝ [36cm] 

46 3/8˝ [118cm] 

14˝ [36cm] 

16” 

[41cm] 

LBT6407CB-1 


Triple compartment sink with faucet ledge. 20 gauge, type 302, 



Universal Installation System hardware and 3 1/2" (89mm) crumb cup 

waste assembly, location center back. 



FAUCET HOLE DRILLING OPTIONS: 

❑ LBT6407CB-1/1 1 hole, 1 1/2" diameter 

❑ LBT6407CB-1/3 3 hole, 8" centerset, 1 1/2" diameter, 

centered over waste of middle bowl 

❑ LBT6407CB-1 Custom (non-returnable) 

*For custom please specify drilling requirements. 

NOTES: 


LBT6410PCB-1 





factory applied rim seal, Universal Installation System hardware 

and 3 1/2" (89mm) crumb cup waste assembly, location center back. 




❑ LBT6410PCB-1/1 1 hole, 1 1/2" diameter 

❑ LBT6410PCB-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBT6410PCB-1 Custom (non-returnable) 


NOTES: 


33 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


22 9/16" [57cm] 

18" [46cm] 

7" [18cm] 

22 9/16˝ [57cm] 

18˝ [46cm] 

10˝ 

[25cm] 

16" [41cm] 

16˝ [41cm] 

52 3/8" [133cm] 

52 3/8˝ [133cm] 

10 1/16" 

[26cm] 

9 1/16" 

[23cm] 

10 1/16˝ 

[26cm] 

9 1/16˝ 

[23cm] 

LBT8607-1 



18-8 stainless steel. Self rimming. Exposed surfaces are satin 

finished. Undercoated to reduce condensation and resonance. 

Complete with Universal Installation System hardware and 





❑ LBT8607-1/1 1 hole, 1 1/2" diameter 

❑ LBT8607-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBT8607-1/4 4 hole, as above plus 1 hole 4" to the right 

❑ LBT8607-1 Custom (non-returnable) 


NOTES: 


LBT8610P-1 





factory applied rim seal, Universal Installation System hardware 

and 3 1/2" (89mm) crumb cup waste assembly, location center. 




❑ LBT8610P-1/1 1 hole, 1 1/2" diameter 

❑ LBT8610P-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBT8610P-1/4 4 hole, as above plus 1 hole 4" to the right 

❑ LBT8610P-1 Custom (non-returnable) 


NOTES: 


34 0311


0311 

Triple compartment sinks are a good choice for 

restaurant and food preparation applications. 

35 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

36 

Undermount Sinks

• Single and double bowls 

• 18 gauge, T304 

• 5" ADA/wheelchair accessible 

and 8" bowl depths 

• Offset waste options 

SECTION 6 

37 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Undermount Sinks 

18 1/8” 

[46cm] 

5” 

[13cm] 

18 1/8” 

[46cm] 

8” 

[20cm] 

18” [46cm] 

20 1/8” [51cm] 

18” [46cm] 

20” [51cm] 

16” 

[46cm] 

16” 

[46cm] 

CAN 

UCS6805P-1 


ADA compliant, single compartment undermount sink. 18 gauge, 

type 304, 18-10 stainless steel. Exposed surfaces are satin finished. 

Undercoated to reduce condensation and resonance. Installation 

hardware and 3 1/2" (89mm) crumb cup waste assembly, location 

left rear. 



NOTES: 

• Vandal resistant waste, reference Waste Options in General Information 

Section 


UCS6808P-1 


Single compartment undermount sink. 18 gauge, type 304, 

18-10 stainless steel. Exposed surfaces are satin finished. Undercoated to 

reduce condensation and resonance. Installation hardware and 3 1/2" 

(89mm) crumb cup waste assembly, location center back. 


OVERALL SIZE: 18 1/16" x 20" (46cm x 41cm) 

NOTES: 


Section 


38 0311

Undermount Sinks 

0311 

5” 

[13cm] 

18 1/8” 

[46cm] 

8” 

[20cm] 

14” [36cm] 14” [36cm] 

30 7/8” [78cm] 

14” [36cm] 

14” [36cm] 

31 1/4” [79cm] 

16” 

[41cm] 

16” 

[46cm] 

17 3/4” 

[45cm] 

CAN 

UCD6405P-1 


ADA compliant, double compartment undermount sink. 18 gauge, type 

304, 18-10 stainless steel. Exposed surfaces are satin finished. 

Undercoated to reduce condensation and resonance. Installation hardware 

and 3 1/2" (89mm) crumb cup waste assembly, location center back. 



NOTES: 


Section 


UCD6408P-1 


Double compartment undermount sink. 18 gauge, type 304, 

18-10 stainless steel. Exposed surfaces are satin finished. Undercoated to 

reduce condensation and resonance. Installation hardware and 3 1/2" 




NOTES: 


Section 


39 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

40 

Vanity Basins

• Oval and round bowls 

• With and without overflow 

• Drop in, undermount and semi-recessed 

• 18 gauge T304 

SECTION 7 

41 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Vanity Basins 

Oval - No ledge 

A 

E 

C 

C1114/5 SHOWN 

D 

B 


18 gauge, type 304, 18-10 stainless steel. Self rimming and positive 

hold down clamping. Mirror finished rim, satin finished bowl. 

Undercoated to reduce condensation and resonance. 

NOTES: 



CAN A B C D E WASTE 

ADA MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) HOLE SIZE OVERFLOW 

• V1114/5 10 7/8" (28cm) 14 3/8" (37cm) 8 1/8" (21cm) 11 5/8" (30cm) 5" (13cm) 1 1/4" (32mm) No 

• V1114/5D 10 7/8" (28cm) 14 3/8" (37cm) 8 1/8" (21cm) 11 5/8" (30cm) 5" (13cm) 1 1/2" (38mm) No 

• V1418/5 13 3/4" (35cm) 18 1/4" (46cm) 11" (28cm) 15 1/2" (39cm) 5" (13cm) 1 1/4" (32mm) No 

• V1418/5D 13 3/4" (35cm) 18 1/4" (46cm) 11" (28cm) 15 1/2" (39cm) 5" (13cm) 1 1/2" (38mm) No 

V1418/6 13 3/4" (35cm) 18 1/4" (46cm) 11" (28cm) 15 1/2" (39cm) 5" (13cm) 1 1/4" (32mm) No 

OV1418/6 13 3/4" (35cm) 18 1/4" (46cm) 11" (28cm) 15 1/2" (39cm) 5" (13cm) 1 1/4" (32mm) Yes 

42 0311

Vanity Basins 

Round - No ledge 

0311 

C 

OV17/6 SHOWN 

B 

A 




Undercoated to reduce condensation and resonance. 

NOTES: 


• 5" deep models only: The model as constructed is subject to the 

interpretation of local building codes. Check ADA, local wheelchair 

accessibility guidelines and local building codes to ensure the 

unobstructed knee space is achieved after installation. 


CAN A B C WASTE 

ADA MODEL DIAMETER DIAMETER (DEPTH) HOLE SIZE OVERFLOW 

• V17/5 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) No 

• OV17/5 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) Yes 

• OV17/5D 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/2" (38mm) No 

V17/6 16 3/4" (42cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) No 

OV17/6 16 3/4" (42cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) Yes 

• V19/5 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) No 

• OV19/5 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) Yes 

• V19/5D 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/2" (38mm) No 

V19/6 18 3/4" (47cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) No 

OV19/6 18 3/4" (47cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) Yes 

43 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Vanity Basins 

With ledge 

A 

C 

E 

V1619/5 SHOWN 

D 

B 




Undercoated to reduce condensation and resonance. Accepts 1 1/4" 

(32mm) waste assembly (not included). 



required by adding the following to the end of the model number; 

(eg. V1619/5/3) 

/1 - 1 hole, 1 1/2" diameter 

/3 - 3 hole, 1 1/8" diameter, 4" centerset 

NOTES: 


• 5" deep models only: The model as constructed is subject to the 

interpretation of local building codes. Check ADA, local wheelchair 

accessibility guidelines and local building codes to ensure the 

unobstructed knee space is achieved after installation. 


CAN A B C D E FAUCET 

ADA MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) HOLE OPTIONS OVERFLOW 

• V1619/5 16 3/8" (42cm) 18 1/2" (47cm) 11" (28cm) 15 23/16" (39cm) 5" (13cm) 1, 3 No 

• OV1619/5 16 3/8" (42cm) 18 1/2" (47cm) 11" (28cm) 15 23/16" (39cm) 5" (13cm) 1, 3 Yes 

V1619/6 16 3/8" (42cm) 18 1/2" (47cm) 11" (28cm) 15 23/16" (39cm) 6" (15cm) 1, 3 No 

OV1619/6 16 3/8" (42cm) 18 1/2" (47cm) 11" (28cm) 15 23/16" (39cm) 6" (15cm) 1, 3 Yes 

• V1821/5 18" (46cm) 21" (53cm) 11 7/16" (29cm) 18" (46cm) 5" (13cm) 1, 3 No 

• OV1821/5 18" (46cm) 21" (53cm) 11 7/16" (29cm) 18" (46cm) 5" (13cm) 1, 3 Yes 

V1821/6 18" (46cm) 21" (53cm) 11 7/16" (29cm) 18" (46cm) 6" (15cm) 1, 3 No 

OV1821/6 18" (46cm) 21" (53cm) 11 7/16" (29cm) 18" (46cm) 6" (15cm) 1, 3 Yes 

44 0311

Vanity Basins 

0311 

13 1/4" 

[33cm] 

13 11/16" 

[35cm] 

10 11/16" 

[28cm] 

5" 

[13cm] 

11 7/16" 

[29cm] 

5" [13cm] 

15 3/16" [39cm] 

17 7/16" [44cm] 

18" [46 cm] 

20 1/4" [51cm] 

9" 

[23cm] 

8 3/4" 

[22cm] 

9 3/8" 

[24cm] 

9" 

[23 cm] 

CAN 

CAN 

OV1317U/5 


ADA compliant undermount model. 18 gauge, type 304, 

18-10 stainless steel. Satin finished bowl. Undercoated to reduce 

condensation and resonance. Accepts 1 1/4" (32mm) waste assembly 

(not included). Integral overflow at back of bowl. 

COMPARTMENT SIZE: 10 11/16" x 15 3/16" x 5" 

(28cm x 39cm x 13cm) 


NOTES: 


• The model as constructed is subject to the interpretation of local 

building codes. Check ADA, local wheelchair accessibility guidelines 

and local building codes to ensure the unobstructed knee space is 

achieved after installation. 

OV1420U/5 


ADA compliant undermount model. 18 gauge, type 304, 

18-10 stainless steel. Satin finished bowl. Undercoated to reduce 

condensation and resonance. Accepts 1 1/4" (32mm) waste assembly 

(not included). Integral overflow at back of bowl. 

COMPARTMENT SIZE: 11 7/16" x 18" x 5" 

(29cm x 46cm x 13cm) 


NOTES: 






45 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Vanity Basins Semi-Recessed 

6" [15cm] deep 

17 7/8" [45cm] 

14" [36cm] 

7" [18cm] deep 

17 7/8" [45cm] 

14" [36cm] 

OV18SR/6 


18 gauge, type 304, 18-10 stainless steel. Semi-recessed bowl has 

raised ledge. Installation hardware included. Satin finished rim, satin 

finished bowl. Undercoated to reduce condensation and resonance. 

Accepts 1 1/4" (32mm) waste assembly (not included). Integral 

overflow at front of bowl. 

COMPARTMENT SIZE: 14" diameter x 6" depth (36cm x 15cm) 

OVERALL SIZE: 17 7/8" diameter x 6" depth (45cm x 15cm) 

NOTES: 


OV18SR/7 


18 gauge, type 304, 18-10 stainless steel. Semi-recessed bowl has 

raised ledge. Installation hardware included. Satin finished rim, satin 

finished bowl. Undercoated to reduce condensation and resonance. 

Accepts 1 1/4" (32mm) waste assembly (not included). Integral 

overflow at front of bowl. 

COMPARTMENT SIZE: 14" diameter x 7" depth (36cm x 18cm) 

OVERALL SIZE: 17 7/8" diameter x 7" depth (45cm x 18cm) 

NOTES: 


46 0311

0311 

47

48 

Drainboard Sinks

• Single and double bowl configurations 

• Right and left hand models 

• Sloped drainboards 

• 18 gauge, T304 

SECTION 8 

49 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


16" 

(41cm) 

8" (20cm) 

16” 

[41cm] 

10” 

[25cm] 

14" 

(36cm) 

18” [46cm] 

36" (91cm) 

40” [102cm] 

21" (53cm) 

20 5/8" 

(52cm) 

20 9/16” 

[52cm] 

LBSDB 6408P-1 


18 gauge, type 304, 18-10 stainless steel. Self rimming, radius coved 

bowl corners and positive hold down clamping. Polished satin finish. 

Undercoated to reduce condensation and resonance. Sloped drainboard 

with u-channel fastening system. 3 1/2" (89mm) crumb cup waste 

assembly, location center back, included. 



DRAINBOARD: 21" (53cm) 


❑ LBSDBL6408P-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBR6408P-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBL6408P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBSDBR6408P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBSDB 6408P-1 Custom (non-returnable) 


*Sixth letter in code indicates position of Drainboard 

(L) left or (R) right of bowl. 

NOTES: 

• Other sizes can be ordered as custom sinks. See custom section 

for details. 


LBSDB 6810P-1 




Undercoated to reduce condensation and resonance. Sloped drainboard. 

3 1/2" (89mm) crumb cup waste assembly, location center, included. 





❑ LBSDBL6810P-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBR6810P-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBL6810P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBSDBR6810P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBSDB 6810P-1 Custom (non-returnable) 




NOTES: 

• T316 equivalent, reference Type 316 section 


for details. 


50 0311


20 1/2" 

(52cm) 

16" 

(41cm) 

0311 

21" (53cm) 

51" (130cm) 

14" 

(36cm) 

Custom Drainboard Sinks 

14" 

(36cm) 

8" (20cm) 

Drainboard sinks can be made using any one of our standard 

drop-in sink models. 

Simply send us a quote request, indicating the following 

information. 

• Sink model to be used 

• Length and position of drainboard(s) 

LBDDB 6408P-1 




Undercoated to reduce condensation and resonance. Sloped 

drainboard. 3 1/2" (89mm) crumb cup waste assemblies, location 

center back, included. 





❑ LBDDBL6408P-1/1 1 hole, 1 1/2" diameter 

❑ LBDDBR6408P-1/1 1 hole, 1 1/2" diameter 

❑ LBDDBL6408P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBDDBR6408P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBDDB 6408P-1 Custom (non-returnable) 




NOTES: 

• T316 equivalent, reference Type 316 section 


for details. 


51 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

52 

Scullery Sinks

• 4 distinctive series for various applications 

• Complete range of NSF scullery sinks 

• Single, double and triple compartments 

• Integral and removable drainboard options 

• 14 and 16 gauge stainless steel construction 

• Built with a sanitary backsplash to resist dirt 

and grime accumulation 

• Full support stainless steel tubular legs have 

adjustable feet 

SECTION 9 

53 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Scullery Sinks Classic Series 

A 

C 

A C 

DB01 Left-hand drainboard 

DB02 Right-hand drainboard 

B 

D 

B 

C A 

D D D 

B 

Single Compartment 

D 

D 

F 

E 

F 

E 

F 

E 


16 gauge, type 304, 18-10 stainless steel. Polished to a #4 satin finish. 

Compartments coved front and back only. Rolled rim, 9" backsplash and 

14" deep compartments. Sink compartments sloped to drain. Stainless 

steel tubular legs with adjustable feet. Waste fitting included. 

WASTE SIZE: (Indicated in model number, eg. SL2424-1) 



with standpipe and guard 


C = center 

RR = right rear 


FAUCET HOLE OPTIONS: 

Please indicate which faucet hole requirement when ordering. Standard 

drilling is one set of 2 hole, 8" centerset. All other drillings are 

considered custom and once drilled, non-returnable. 

NOTES: 



A B C D E F WASTE FLOOR TO 

MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH LOCATION WORK SURFACE 

SL2424-1 27 3/16" (69cm) 27 3/8" (70cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) C 35" (89cm) 

SL2424-5 27 3/16" (69cm) 27 3/8" (70cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) RR 35" (89cm) 

SL2448-1 27 3/16" (69cm) 51 3/8" (130cm) 24" (61cm) 48" (122cm) 14" (36cm) 9" (23cm) C 35" (89cm) 

SL2448-5 27 3/16" (69cm) 51 3/8" (130cm) 24" (61cm) 48" (122cm) 14" (36cm) 9" (23cm) RR 35" (89cm) 

Double Compartment 




DL2448-1 27 3/16" (69cm) 51 3/8" (130cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) C 35" (89cm) 

DL2448-5 27 3/16" (69cm) 51 3/8" (130cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) RR, LR 35" (89cm) 

Triple Compartment 




TL2454-1 29 7/16" (75cm) 60" (152cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) C 35" (89cm) 

TL2454-5 29 7/16" (75cm) 60" (152cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) RR, RR, LR 35" (89cm) 

TL2472-1 29 3/16" (74cm) 77 3/8" (197cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) C 35" (89cm) 

TL2472-5 29 3/16" (74cm) 77 3/8" (197cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) RR, RR, LR 35" (89cm) 

Removable Drainboards 

54 0311

Scullery Sinks S Series 


A B C D E F FLOOR TO WASTE FAUCET 

MODEL 

OPTIONS 

(F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH WORK SURFACE LOCATION HOLES 

SSL2424-1 27 1/2" (70cm) 27" (69cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SSL2424-5 27 1/2" (70cm) 27" (69cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

SSL2424R-1 27 1/2" (70cm) 49 1/2" (124cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SSL2424R-5 27 1/2" (70cm) 49 1/2" (124cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

SSL2424L-1 27 1/2" (70cm) 49 1/2" (124cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SSL2424L-5 27 1/2" (70cm) 49 1/2" (124cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

SSL2424LR-1 27 1/2" (70cm) 72" (180cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SSL2424LR-5 27 1/2" (70cm) 72" (180cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 





0311 

A 

C 

35" 

(90cm) 


D 

B 

F 

E 



Compartments are square corner construction. Rolled rim. Drainboard 

and sink compartments sloped to drain. Stainless steel tubular legs with 

adjustable feet. Waste assembly included. 

DRAINBOARD SUFFIX: 

L = left drainboard 

R = right drainboard 

LR = left and right drainboard 

WASTE SIZE: (Indicated in model number, eg. SSL2424-1) 





C = center 






NOTES: 


55 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


A C 

D 


B 

D 

F 

E 










WASTE SIZE: (Indicated in model number, eg. SDL2430-1) 





C = center 







NOTES: 




MODEL 

OPTIONS 


SDL2430-1 27 1/2" (70cm) 33" (84cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SDL2430-5 27 1/2" (70cm) 33" (84cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 





SDL2442LR-1 27 1/2" (70cm) 90" (229cm) 24" (61cm) 21" (53cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SDL2442LR-5 27 1/2" (70cm) 90" (229cm) 24" (61cm) 21" (53cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 



SDL2448LR-1 27 1/2" (70cm) 96" (244cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

SDL2448LR-5 27 1/2" (70cm) 96" (244cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

56 0311





MODEL 

OPTIONS 


STL2445-1 27 1/2" (70cm) 48" (120cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

STL2445-5 27 1/2" (70cm) 48" (120cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, RR, LR 2 





0311 

A C 

D 

D D 

B 

F 

E 






WASTE SIZE: (Indicated in model number, eg. STL2445-1) 





C = center 







NOTES: 


57 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Scullery Sinks R Series 

A 


C 

D 

B 

F 

E 



Compartments are welded 1" radius coved corner construction. Rolled 

rim. Drainboard and sink compartments sloped to drain. Stainless steel 

tubular legs with adjustable feet. Waste assembly included. 





WASTE SIZE: (Indicated in model number, eg. RSL2418-1) 





C = center 






NOTES: 




MODEL 

OPTIONS 


RSL2418-1 29 1/2" (75cm) 23" (58cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RSL2418-5 29 1/2" (75cm) 23" (58cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

RSL2418R-1 29 1/2" (75cm) 44 1/2" (113cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RSL2418R-5 29 1/2" (75cm) 44 1/2" (113cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

RSL2418L-1 29 1/2" (75cm) 44 1/2" (113cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RSL2418L-5 29 1/2" (75cm) 44 1/2" (113cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

RSL2418LR-1 29 1/2" (75cm) 66" (168cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RSL2418LR-5 29 1/2" (75cm) 66" (168cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

RSL2424-1 29 1/2" (75cm) 29" (74cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RSL2424LR-1 29 1/2" (75cm) 72" (183cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

58 0311


A C 


0311 

D 

B 

D 

F 

E 










WASTE SIZE: (Indicated in model number, eg. RDL2436-1) 





C = center 







NOTES: 




MODEL 

OPTIONS 


RDL2436-1 29 1/2" (75cm) 43" (108cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RDL2436-5 29 1/2" (75cm) 43" (108cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

RDL2436R-1 29 1/2" (75cm) 64 1/2" (161cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RDL2436R-5 29 1/2" (75cm) 64 1/2" (161cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

RDL2436L-1 29 1/2" (75cm) 64 1/2" (161cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RDL2436L-5 29 1/2" (75cm) 64 1/2" (161cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

RDL2436LR-1 29 1/2" (75cm) 86" (218cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RDL2436LR-5 29 1/2" (75cm) 86" (218cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

RDL2448-1 29 1/2" (75cm) 53" (135cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RDL2448LR-1 29 1/2" (75cm) 96" (244cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

59 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


A C 


D 

D D 

B 

F 

E 










WASTE SIZE: (Indicated in model number, eg. RTL2454-1) 





C = center 







NOTES: 




MODEL 

OPTIONS 


RTL2454-1 29 1/2" (75cm) 63" (160cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RTL2454-5 29 1/2" (75cm) 63" (160cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, RR, LR 2 

RTL2454R-1 29 1/2" (75cm) 84 1/2" (215cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RTL2454R-5 29 1/2" (75cm) 84 1/2" (215cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, RR, LR 2 

RTL2454L-1 29 1/2" (75cm) 84 1/2" (215cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm)) C 2 

RTL2454L-5 29 1/2" (75cm) 84 1/2" (215cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, RR, LR 2 

RTL2454LR-1 29 1/2" (75cm) 104" (264cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RTL2454LR-5 29 1/2" (75cm) 104" (264cm) 24" (61cm) 18" (46cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, RR, LR 2 

RTL2472-1 29 1/2" (75cm) 77" (196cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

RTL2472LR-1 29 1/2" (75cm) 120" (305cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

60 0311

Scullery Sinks W Series 



MODEL 

OPTIONS 


WSL2424-1 29 1/2" (74cm) 29" (73cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WSL2424-5 29 1/2" (74cm) 29" (73cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

WSL2424R-1 29 1/2" (74cm) 50 1/2" (128cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WSL2424R-5 29 1/2" (74cm) 50 1/2" (128cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

WSL2424L-1 29 1/2" (74cm) 50 1/2" (128cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WSL2424L-5 29 1/2" (74cm) 50 1/2" (128cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 

WSL2424LR-1 29 1/2" (74cm) 72" (183cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WSL2424LR-5 29 1/2" (74cm) 72" (183cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR 2 





0311 

A 

C 


D 

B 

F 

E 










WASTE SIZE: (Indicated in model number, eg. WSL2424-1) 





C = center 






NOTES: 


61 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


A C 


D 

B 

D 

F 

E 










WASTE SIZE: (Indicated in model number, eg. WDL2448-1) 





C = center 







NOTES: 




MODEL 

OPTIONS 


WDL2448-1 29 1/2" (75cm) 53" (133cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WDL2448-5 29 1/2" (75cm) 53" (133cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

WDL2448R-1 29 1/2" (75cm) 74 1/2" (189cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WDL2448R-5 29 1/2" (75cm) 74 1/2" (189cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

WDL2448L-1 29 1/2" (75cm) 74 1/2" (189cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WDL2448L-5 29 1/2" (75cm) 74 1/2" (189cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

WDL2448LR-1 29 1/2" (75cm) 96" (240cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WDL2448LR-5 29 1/2" (75cm) 96" (240cm) 24" (61cm) 24" (61cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 





62 0311


A C 


0311 

D 

D D 

B 

F 

E 










WASTE SIZE: (Indicated in model number, eg. WTL2445-1) 





C = center 







NOTES: 




MODEL 

OPTIONS 


WTL2445-1 29 1/2" (75cm) 50" (127cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WTL2445-5 29 1/2" (75cm) 50" (127cm) 24" (61cm) 15" (38cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 





WTL2472R-1 29 1/2" (75cm) 98 1/2" (250cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WTL2472R-5 29 1/2" (75cm) 98 1/2" (250cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

WTL2472L-1 29 1/2" (75cm) 98 1/2" (250cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WTL2472L-5 29 1/2" (75cm) 98 1/2" (250cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

WTL2472LR-1 29 1/2" (75cm) 120" (305cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) C 2 

WTL2472LR-5 29 1/2" (75cm) 120" (305cm) 24" (61cm) 24" (60cm) 14" (36cm) 9" (23cm) 35" (89cm) RR, LR 2 

63 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

64 

Surgical Scrub Stations

• Premium 16 gauge and robust 18 gauge 

stainless steel models 

• Single, double and triple compartments 

• Access panel for service maintenance 

• Hands-free faucet packages available with 

thermostatic valve 

SECTION 10 

65 

SURGICAL 

SCRUB STATIONS 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

2 

Premium Surgical Scrub Stations 

19 3/4” [50 cm] 

4 3/4” 

[12 cm] 

28” 

[71 cm] 

13” 

[33 cm] 

5 1/8” [13 cm] 2 5/8” 

[14 cm] 

16” [40 cm] 

10” 

[25 cm] 

SSU1-2016-00 


16 gauge, type 304, 18-10 stainless steel. Polished satin finish. Radius 

coved bowl corners. Access panel for service and maintenance. Integral 

1 1/2" (38mm) threaded tailpiece. Supplied with wall hanger brackets. 

Surface treated with Saniguard product protection. 

COMPARTMENT SIZE: 13 1/2" x 13" x 10" (34cm x 33cm x 25cm) 


BACKSPLASH: 5 1/8" (13cm) 

DESIGN FEATURES: 

• New surgical scrub stations designed with sloped edges to minimize 

free-standing water 

• Special integral waste design to prevent use of a waste plug, with 

1 1/2" threaded tailpiece for use with offset waste. 

• Saniguard product protection is effective against most common 

bacteria, yeasts, molds and fungi that cause stains, odors and product 

deterioration. Saniguard ® product protection is designed to protect 

the product itself and will not protect the user or others from 

food-borne illness or disease. Always follow proper hygienic and 

cleaning procedures when using this product. 

NOTES: 

• To learn more about the features and benefits of Saniguard ® product 

protection, please see page 76. 

• Electronic specifications, reference http://kindred-sinkware.com 

66 0311

5 


0311 

28” 

[71 cm] 

19 3/4” [50 cm] 

4 3/4” 

[12 cm] 

20” [51 cm] 

5 1/8” [13 cm] 

17” 

[43 cm] 

10” 

[25 cm] 

2 5/8” 

[2 cm] 

2 1/2” 

[6 cm] 

SSU1-2020-00 




















NOTES: 




67 

SURGICAL 



DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


28” 

[71 cm] 

5 1/8” 

[13 cm] 

19 3/4” [50 cm] 

4 3/4” 

[12 cm] 

40” [102 cm] 

18 7/16” 

[47 cm] 

2 5/8” 

[7 cm] 

10” 

[25 cm] 

2 1/8” 

[5 cm] 

SSU2-2040-00 







(34cm x 95cm x 10cm) 






• Partition in center of sink bowl minimizes splashing 









NOTES: 




68 0311

Surgical Scrub Stations 

0311 

23" (58cm) 

26" (66cm) 

30" (76cm) 

27" (69cm) 

3" (8cm) 

19" (48cm) 

4" (10cm) 

6 1/2" (17cm) 

11" (28cm) 

4" (10cm) 

12" (31cm) 

SSU1- 



coved bowl corners. Access panel for service and maintenance. 1 1/2" 

(38mm) grid strainer. Supplied with wall hanger brackets. 


OVERALL SIZE: 23" x 30" (58cm x 76cm) 

BACKSPLASH: 4" (10cm) 

FAUCET OPTIONS: 

❑ SSU1-00 Faucet not included. Please specify hole drilling 

requirement when ordering. 

❑ SSU1-10 H6000* AC powered hands-free faucet - 1 ea. 

TMV570 thermostatic mixing valve - 1 ea. 

❑ SSU1-11 H6000* AC powered hands-free faucet- 1 ea. 


C621 AC powered hands-free soap dispenser - 1 ea. 

❑ SSU1-20 HB6000* battery operated hands-free faucet - 1 ea. 


See "Faucet Package" specifications for additional information. 

NOTES: 


• *Faucets certified to CSA B125 and ANSI/ASME A 112.18.1, 

but are not listed with IAPMO (UPC) or NSF 

69 

SURGICAL 



DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


23" (58cm) 

26" (66cm) 

60" (152cm) 

57" (145cm) 

3" (8cm) 

Removable Divider 

19" (48cm) 

4" (10cm) 

6 1/2" (17cm) 

11" (28cm) 

4" (10cm) 

12" (31cm) 

SSU2- 



















NOTES: 




70 0311


23" 

(58cm) 

26" 

(66cm) 

0311 

90" (229cm) 


87" (221cm) 

3" (8cm) 

19" (48cm) 


4" (10cm) 

4" 

(10cm) 

6 1/2" 

(17cm) 

11" 

(28cm) 

12" 

(31cm) 

SSU3- 



















NOTES: 




71 

SURGICAL 



DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


H6000 

AC powered hands-free faucet included with SSU-10 and 

SSU-11 models. 

Faucet Body: Chrome-plated brass. Single hole mount with 

built-in sensor 

Sensor Range: Factory preset. Adjustable. 

Spout: 9" gooseneck 

Spout Outlet: 2.0 GPM Laminar flow control 

Control Circuit: Solid state, 12V DC input/output. 

2 second off delay. 

Solenoid Valve: 12V DC, 3/8" NPT, normally closed. 

Wattage - 0.4W (idle), 5W (in-use). 

Water pressure 5 - 125 psi. 

Transformer: Input - 120V AC, 60 Hz 

Output - 12V DC 0.8 

AMP/Class 2 Plug-in AC adapter included 

NOTES: 

• Meets ANSI/ASME A 112.18.1M-2000, but are not listed with IAPMO 

(UPC) or NSF 

• Meets CSA B125 

HB6000 

Battery operated hands-free faucet included with SSU-20 models. 

Faucet Body: Chrome-plated brass. Single hole mount with 

built-in sensor 

Sensor Range: Factory preset. Adjustable. 

Spout: 9" gooseneck 

Spout Outlet: 2.0 GPM Laminar flow control 

Control Circuit: Solid state, 6V DC input/output. 

1 second off delay. 

Solenoid Valve: 6V DC, 3/8" FNPT, normally closed. 

Wattage - 0.4W (idle), 5W (in use). 

Water pressure 5 - 125 psi. 

Battery: 6V DC Lithium (Duracell DL 223A) 

Battery life - 300,000 cycles. 

NOTES: 

• Meets ANSI/ASME A 112.18.1M-2000, but are not listed with IAPMO 

(UPC) or NSF 

• Meets CSA B125 

72 0311

Faucet Package 

0311 

Cold Inlet 

Tempered Outlet 

Adjusting Dial 

Hot Inlet 

TMV570 

Lawler Mixing Valve 


Thermostatic mixing valve included with SSU_-10, SSU_-11 and 

SSU_-20 models. 

• Outlet temperature range: 95-115°F (35-46°C). 

• Temperature, hot supply: 180°F max (91°C). 

• Temperature, cold supply: 40-80°F (4-27°C). 

• Temperature stability (nominal): ±5°F (±3°C). 

• Temperature differential (between hot supply and outlet temperature): 

10°F (11°C). 

• Hydrostatic pressure: 125 psi max (1000 kPa). 

• Permitted supply pressure variation: ±20%. 

• Flow rate @ 45psi pressure loss: 9 gpm (66L/min). 

• Flow rate, minimum: 0.5 gpm (4L/min). 

• Flow rate, maximum: 10 gpm (76L/min). 

BENEFITS: 

• Protects against scalding and chilling. 

• Offers choice of temperature settings from 95° through 115°F. 

• Easy installation. 

• Backed by Lawler’s One Year Warranty. 

• ASSE 1017 & 1070 approved. 

C621 

Wall-Mounted Soap Dispenser 

AC powered hands-free soap dispenser included with SSU -11 models. 

Casing: Stainless steel (1.5 mm) 

Soap Container:Stainless steel (1 mm) 

Soap Pump: Self priming, adjustable (1 to 3 seconds) 

Capacity: 1 litre 

73 

SURGICAL 



DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Saniguard ® Product Protection 

SANIGUARD ® antimicrobial product protection 

SANIGUARD ® antimicrobial product protection is applied to our 

Clinical Hand Wash basins (p.19) as well as to our Premium 

Surgical Scrub Stations (p.18) to protect the product from the 

growth of bacteria, mold, mildew and fungi that can cause odors 

and staining, in hospitals, clinics, and other medical facilities. 

What is it? 

SANIGUARD ® product protection is an invisible, food-safe, 

odorless coating applied to all exposed surfaces on the Clinical 

Hand Wash basins and Premium Surgical Scrub Stations models. 

How does it work? 

When microbes come into contact with a surface treated with 

SANIGUARD ® product protection, the inorganic, silver ion 

technology actively inhibits their growth by hindering cell wall 

transmissions, disrupting cell metabolism, and interfering with 

cellular reproduction. 

What are the benefits of this coating on a stainless steel sink? 

SANIGUARD ® product protection is effective against most 

common bacteria, yeasts, molds, and fungi that cause stains, 

odors and product deterioration. In addition, SANIGUARD ® 

product protection makes products easier to clean and keep 

them cleaner and fresher between cleanings. Under normal 

cleaning conditions, the SANIGUARD ® coating will provide 

continuous antimicrobial product protection for the useful life 

of the product. 

Please note: 

SANIGUARD ® product protection is designed to protect the 

product itself and will not protect the user or others from 



Custom: 

SANIGUARD ® product protection is available as a custom 

coating for most Kindred Commercial sinks; however, it is only 

recommended for use in hand washing applications. The use of 

sharp utensils or heavy equipment can chip and mar the treated 

surface. 

Pricing: 

To receive a quotation on the application of SANIGUARD ® 

product protection to other Kindred Commercial products, 

please contact our Customer Service Representatives by e-mail 

or by fax. 

74 0311

Following is a partial list of bacteria, yeast, fungi and mold 

against which Saniguard has been proven effective : 

Bacteria 

• Methicillin Resistant Staph aureus (MRSA) 

• Vancomycin Resistant Enterococcus (VRE) 

• Bacillus cereus 

• Bacillus thuringiensis 

• Legionella pneumophila 

• Escherichia coli 

• Klebsiella pneumoniae 

• Salmonella gallinarum 

• Salmonella typhimurium 

• Phorphyromonas gingivalis 

• Staphylococcus aureus 

• Staphylococcus epidermidis 

• Streptococcus faecalis 

• Streptococcus agalactiae 

• Streptococcus mutans 

• Pseudomonas aeruginosa 

• Proteus species 

• Vibrio parahaemolyticus 

• Enterobacter aerogenes 

• Enterobacter sakazakii 

• Listeria monocytogenes 

• Campylobacter jejuni 

Yeast, Fungi & Mold 

• Stachybotrys 

• Aspergillus niger 

• Candida albicans 

• Penicillium funiculosum 

• Saccharomyces cerevisiae 

• Trichophyton malmsten 

• Chaetomium globosum 

• Aureobasidium pullulans 

• Gliocladium virens 

0311 

Built to your specification 

Our surgical scrub stations can be fabricated to your 

specification. 

As concerns over infection control take a more prominent 

role in hospital fixture design, flexibility in design and quality 

craftsmanship are a must. 

Give our trained inside sales staff a call to discuss some 

commonly requested options. 

75 

SURGICAL 



DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

76 

Wash Basins & Trough Sinks

• Luxury Franke wash basins, both wallmounted and freestanding 

• Clinical Hand Wash Basins with raised side guards 

• Wall hung basins with integral backsplash 

• Pedestal wash basins 

• ADA/wheelchair accessible wall hung basin 

• Corner application washbasin 

• Service sinks 

• Wall troughs, standard service and heavy duty service 

SECTION 11 

77 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS

Wash Basins & Trough Sinks Luxury Wash Basins 

33 1/2“ 

[85cm] 

19 5/8“ 

[50cm] 

13 7/8“ 

[35cm] 

37“ [94cm] 

33 7/8“ [86cm] 

3 1/8“ 

[8cm] 

19 5/8“ 

[50cm] 

13 7/8“ 

[35cm] 

22 3/16“ 

[56cm] 

7 3/16“ 

[18cm] 

XINX201 


Franke free standing wash basin. 14 gauge (2mm) 18-10 stainless steel. 

Basin is satin finished with a high polished bowl. Round opening on deck 

feeds an integrated waste bin with hinged locking cover. 

COMPARTMENT SIZE: 

14 1/2" diameter x 4 1/2" deep (37cm x 11cm) 

OVERALL SIZE: 

19 5/8" x 19 5/8" x 33 1/2" (50cm x 50cm x 85cm) 

FAUCET HOLE DRILLING: 1 hole, 1 3/8" diameter (32mm) 

SOAP DISPENSER HOLE DRILLING: 1" diameter (25mm) 

NOTES: 

• Complete with overflow 

• 1 1/4" (32mm) pop-up strainer included 

• Adapter kit for use with a standard 1 1/4" (32mm) strainer included 


XINH201 


Franke wall mounted wash basin. 11 gauge (3mm) 18-10 stainless steel. 

Surface treated with InoxPlus ® surface treatment for the reduction of 

finger prints and ease of cleaning. Basin bowl is high polished with a 

satin finished deck. Integral overflow. 

COMPARTMENT SIZE: 15" diameter x 5" deep (39cm x 13cm) 


FAUCET HOLE DRILLING: 1 hole, 1 1/4" diameter (32mm) 

NOTES: 

• Integrated mounting brackets included 

• 1 1/4" (32mm) pop-up strainer included 

• Adapter kit for use with a standard 1 1/4" strainer included 

• Electronic specifications, referencewww.kindred-commercial.com 

Franke has applied advanced nano-technology to develop the 

InoxPlus ® surface treatment. This enables treated products to resist 

fingerprints, and contaminants by not allowing them to stick in the first 

place. The InoxPlus ® surface is also resistant against scratches, acids 

and alkaline fluids used in common household cleaners. 

78 0311

Wash Basins & Trough Sinks Clinical Hand Wash Basins 

18 1/2” 

[47 cm] 

0311 

14 1/4” [36 cm] 

3” [8 cm] 

14 1/2” 

[37 cm] 

15” [38 cm] 

4 1/2” 

[11 cm] 

14” 

[36 cm] 

3 1/4” 

[8 cm] 

Integrally welded 1.5" 

tailpiece 

6” 

[15 cm] 

14” [36 cm] 

18 1/2” 

[47 cm] 

10” 

[25 cm] 

17 1/2” [45 cm] 

18 3/4” [48 cm] 

3” 

[8 cm] 

9” [23 cm] 

AWHB1414P-00 



coved bowl corners. Integral 1 1/2" waste welded to bottom of the sink 

bowl. Waste is left open to allow for easy cleaning of P-Trap. Waste 

location left rear. Saniguard ® product protection on all exposed surfaces 

of sink. 




WASTE: Integrally welded stainless steel tailpiece 1 1/2" 

FAUCET HOLE DRILLING OPTIONS: Please specify 

NOTES: 

• Separate sink carrier is not required 

• To learn more about Saniguard ® product protection, see page 76 


HWS1414P-00 


18 gauge, type 304, 18-10 stainless steel medical hand wash basin. 

Polished to a #4 satin finish. Fixture bowl is constructed with radius 

coved corners. Integral side splashes help prevent splashing and 

contamination of nearby surfaces. Waste location is left corner back and 

includes integral tailpiece. Wall hangers included. Saniguard ® product 

protection on all exposed surfaces of sink. 


OVERALL SIZE: 18 3/4" x 15" x 18 1/2" (48cm x 38cm x 47cm) 


WASTE: Integrally welded stainless steel tailpiece 1 1/2" 

FAUCET HOLE DRILLING OPTIONS: Please specify 

NOTES: 


• To learn more about Saniguard ® product protection, see page 76 


79 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Wash Basins & Trough Sinks Clinical Hand Wash Basins 

21” [53cm] 

Integrally welded 1.5" 

tailpiece 

14" 

[36cm] 

37” 

[94cm] 

26 1/2” 

[67cm] 

10” 

[25cm] 

18 3/4” [48cm] 

3” 

[8 cm] 

17 1/4" [44cm] 

3 1/4" 

[8cm] 

12" [31cm] 

2" 

[5cm] 

4 1/2” 

[11 cm] 

14” 

[36 cm] 

15 1/2" 

[39cm] 

9" 

[23cm] 

6" 

[15cm] 

HWS1420P-00 


18 gauge, type 304, 18-10 stainless steel medical hand wash basin. 

Polished to a #4 satin finish. Fixture bowl is constructed with radius 

coved corners. Integral side splashes help prevent splashing and 

contamination of nearby surfaces. Waste location is left rear and 

includes integral tailpiece. Wall hangers included. Saniguard ® product 

protection on all exposed surfaces of sink. 


OVERALL SIZE: 18 3/4" x 21" x 37" (48cm x 53cm x 94cm) 


NOTES: 


• To learn more about Saniguard ® product protection, see page 76. 


WHB1616-3 

NEW 


Wall hung basin. 18 gauge, type 302, 18-8 stainless steel. Polished satin 

finish. Radius coved bowl corners. One piece wall hanger. 1 1/2" waste 

assembly, location center back. 





❑ WHB1616-3 Custom (non-returnable) 

NOTES: 

• Vandal resistant waste, reference Waste Options in General 

Information Section. 


• Specified faucet must be able to be mounted on a 2" wide backsplash. 

80 0311

Wash Basins & Trough Sinks Wall Hung Hand Wash Sinks 

0311 

3 3/4" 

[9.5cm] 

3 3/4" 

[9.5cm] 

8 1/4" 

[21cm] 

14" [36cm] 

16 1/2" [42cm] 

16" [41cm] 

18 1/2" [47cm] 

9 1/4" 

[23cm] 

7 1/4" 

[18cm] 

12" 

[30cm] 

17" 

[43cm] 

6" [15cm] 

11" 

[28cm] 

14" 

[36cm] 

19" 

[48cm] 

7" [18cm] 

CAN 

WHB1617- 



coved bowl corners. 16 gauge side wall brackets. One piece wall hanger. 

Waste assembly center back. 


OVERALL SIZE: 17" x 16 1/2" (43cm x 42cm) 


WASTE & FAUCET HOLE DRILLING OPTIONS: 

1 1/2" (38mm) duplex waste assembly with rubber stopper 

❑ WHB1617-3/1 1 hole, 1 1/2" diameter 

❑ WHB1617-3/3 3 hole, 1 1/4" diameter, 4" centerset 



and integral overflow 




Accepts 1 1/4" (32mm) waste assembly (not included) 





NOTES: 

• Separate sink carrier not required 

• T316 equivalent, reference Type 316 laboratory section 


Information Section 


WHB1819- 



coved bowl corners. 16 gauge side wall brackets. One piece wall hanger. 

Waste assembly center location. 










and integral overflow 




Accepts 1 1/4" (32mm) waste assembly (not included) 





NOTES: 


• T316 equivalent, reference Type 316 laboratory section 




81 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Wash Basins & Trough Sinks Pedestal/Wall Hung Lavs 

16" (41cm) 

18 1/2" (47cm) 

17 13/16" 

[45cm] 

11 5/8" 

[29cm] 

5 1/2" 

[14cm] 

19" 

(48cm) 

14" 

(36cm) 

13" [33cm] 

15 3/4" [40cm] 

18 1/2" (47cm) 

10" (25cm) 

7" (18cm) 

40" 

(102cm) 

FWHB1819-3 



coved bowl corners. Base pedestal. One piece wall hanger. 

1 1/2" (38mm) duplex waste assembly included, location center. 




OVERALL HEIGHT: 40" (102cm) 


This model is not returnable once drilled to your specification. Faucet 

hole locations should be indicated relative to the sink orientation as 

shown in the catalogue drawings. A sketch is recommended. 

NOTES: 


WT400C- 


Single compartment wall mount wash basin with faucet ledge. 

19 gauge, 18-10 stainless steel. Exposed surfaces are brushed finish. 

Includes installation kit. 1 1/4" (32mm) waste assembly, location 

center back (not included). 

COMPARTMENT SIZE: 11 5/8" x 13" x 5 1/2" (29cm x 33cm x 

14cm) 


WASTE OPTIONS: 

-7 = Accepts 1 1/4" waste assembly 

-8 = Accepts 1 1/4" waste assembly with integral rear overflow 

Overflow No overflow Faucet hole drilling options 

❑ WT400C-8/1 ❑ WT400C-7/1 1 hole, 1 1/2" diameter 

❑ WT400C-8 ❑ WT400C-7 Custom (non-returnable) 


NOTES: 


• Optional shroud also available (refer to specification page WT-RS). 

82 0311

Wash Basins & Trough Sinks Wall Hung Lavs 

0311 

17 1/2" 

[44cm] 

18 7/8" 

[48cm] 

11 1/2" 

[29cm] 

5 3/8" 

[14cm] 

13 1/8" 

[33cm] 

5 5/8" 

[14cm] 

15 3/4" [40cm] 

19 11/16" [50cm] 

21 1/4" [54cm] 

23 5/8" [60cm] 

CAN 

WT500C- 


Single compartment wall mount wash basin with faucet ledge. 

19 gauge, 18-10 stainless steel. Exposed surfaces are brushed finish. 

Includes installation kit. 1 1/4" (32mm) waste assembly, location 


COMPARTMENT SIZE: 11 1/2" x 15 3/4" x 5 3/8" 

(29cm x 40cm x 14cm) 









NOTES: 


• Optional shroud also available (refer to specification page WT-RS). 

WT600C- 


ADA compliant, single compartment wall mount wash basin with faucet 

ledge. 19 gauge, 18-10 stainless steel. Exposed surfaces are brushed 

finish. Includes installation kit. 1 1/4" (32mm) waste assembly, location 



(33cm x 54cm x 14cm) 









NOTES: 


• Optional shroud also available (refer to specification page WT-RS) 

• The model as constructed is subject to the interpretation of ADA 

requirements. Check ADA and local codes to ensure the unobstructed 

knee space is achieved after installation. 

83 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Wash Basins & Trough Sinks Wall Hung Lavs 

12 3/16" [31cm] 

6 1/8" 

[15cm] 

12 3/16" [31cm] 

11 7/16" [29cm] 

15 3/4” 

[40 cm] 

4" 

[10cm] 

5/8" 

[2cm] 

2 7/8 

6 1/2” 

[16.5 cm] 

12 3/16" [31cm] 

MOUNTING INFORMATION 

1 

10 5/8" [27cm] 

13/16" [2cm] 

10 1/2” [27 cm] 

4 1/2" 

[11cm] 

WT310E-7 


Single compartment corner wall mount wash basin with faucet ledge. 19 

gauge, 18-10 stainless steel. Exposed surfaces are brushed finish. 

Includes installation kit. Accepts 1 1/4" (32mm) center waste assembly 

(not included). Mounting hardware included. 


(15cm x 29cm x 11cm) 



❑ WT310E-7/1 1 hole, 1 1/2" diameter 

❑ WT310E-7 Custom (non-returnable) 


NOTES: 


WT-RS 

Shroud for Wash Basins 


Trap cover manufactured from 18 gauge, 18-10 stainless steel. Exposed 

surfaces are brush finished. For wallmount installation 

of wash basin models WT400C, WT500C, and WT600C. 

OVERALL SIZE: 10 1/2" x 15 3/4" x 6 1/2" 

(27cm x 40cm x 17cm) 

NOTES: 


CMPX150 MOUNTING SYSTEM 

In-wall mounting system for wall hung stainless steel wash basins 

with single hole mixer. For use with wash basins WT400C, WT500C, 

WT600C and WHB Series. 

NOTES: 

• Consult local Building and Fire Codes to ensure compliance and 

requirements for the installation of an in-wall wood support frame. 

84 0311

Wash Basins & Trough Sinks Service Sinks 

40" 

[102cm] 

0311 

12" 

[30cm] 

28" 

[71cm] 

12" 

[30cm] 

13" 

[33cm] 

20" [51cm] 

17" [43cm] 

20" [51cm] 

3 1/2" 

[9cm] 

16" 

[41cm] 

19" 

[48cm] 

12" 

[30cm] 

13" 

[33cm] 

19" [48cm] 

1 

20" [51cm] 

17" [43cm] 

20" [51cm] 

16" 

[41cm] 

19" 

[48cm] 

WSS6713 



coved bowl corners. 3 1/2" (89mm) crumb cup waste assembly, 

location center. 





❑ WSS6713/2 2 hole, 1 1/4" diameter, 8" centerset 

❑ WSS6713 Custom (non-returnable) 


NOTES: 


BCS6713 



coved bowl corners. BCS6713 combines WSS6713 with partially 

enclosed base cabinet as shown. 3 1/2" (89mm) crumb cup waste 

assembly, location center. 




OVERALL HEIGHT: 40" (102cm) 


❑ BCS6713/2 2 hole, 1 1/4" diameter, 8" centerset 

❑ BCS6713 Custom (non-returnable) 


NOTES: 


85 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Wash Basins & Trough Sinks Wall Trough Sinks 

Standard Series 

Wall Hanger Bracket 

Angle brackets (welded to sink) 

D 

B 

C 

F 

E 

A 


16 gauge, 18-10, type 304 stainless steel. Waste fittings included. 

Polished satin finish. Radius coved bowl corners. 14 gauge wall brackets. 

One piece wall hanger. Waste assembly center located included. 3 1/2" 

(89mm) crumb cup waste assembly, location center. 

COMPARTMENT SIZE: 14 3/4" x 33 1/2" x 8" (38cm x 83cm x 20cm) 




These models are not returnable once drilled to your specification. Faucet 



NOTES: 

• 1 1/2" (38mm) waste option available as a custom request 





A B C D E F WASTE FAUCET 

MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH LOCATION HOLES OPTIONS 

WTS36-1 18" (46cm) 36" (91cm) 14 3/4" (38cm) 33 1/2" (83cm) 8" (20cm) 8" C N/A 




86 0311

Wash Basins & Trough Sinks Wall Trough Sinks 

Heavy Duty Series 

0311 


Angle brackets (welded to sink) 

D 

B 

C 

F 

E 

A 


Single compartment wash trough. 14 gauge, type 304,18-10 stainless 

steel. Polished to a #4 satin finish. 1" radius vertical and horizontal 

coved corners & 1 1/2" rolled radius rims. Bowl sloped to drain. 

Complete with wall hanger, stainless steel support brackets, and 3 1/2" 

(89mm) crumb cup waste assembly. 


These models are not returnable once drilled to your specification. Faucet 



NOTES: 





A B C D E F WASTE FAUCET 

MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH LOCATION HOLES OPTIONS 

WTS2025-1 20" (51cm) 25" (64cm) 16 1/2" (42cm) 22" (56cm) 10 1/2" (27cm) 6" (15cm) C N/A 

WTS2031-1 20" (51cm) 31" (79cm) 16 1/2" (42cm) 28" (71cm) 10 1/2" (27cm) 6" (15cm) C N/A 

WTS2036-1 20" (51cm) 36" (91cm) 16 1/2" (42cm) 33" (84cm) 8" (20cm) 10" (25cm) C N/A 



WTS2072-1 20" (51cm) 72" (183cm) 16 1/2" (42cm) 69 (175cm) 8" (20cm) 10" (25cm) C N/A 

WTS2096-1 20" (51cm) 96" (244cm) 16 1/2" (42cm) 93 (236cm) 8" (20cm) 10" (25cm) C N/A 

87 

GENERAL 

INFORMATION 

WASH BASINS & 

TROUGH SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

88 

Mop Service Sinks

• Stainless steel floor mounted mop service sinks 

• Integral stainless steel back and side splash 

• T316 for corrosion resistance 

• One piece wall hangers included 

• 16 gauge 

SECTION 12 

89 

GENERAL 

INFORMATION 


DROP-IN SINKS 

MOP 

SERVICE SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Mop Service Sinks 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

24" (61cm) 

21 1/2" 

(55cm) 

12" 

(31cm) 

22" (60cm) 

10" 

(25cm) 

36” [91cm] 

33 1/2 [85cm] 

12” 

[30cm] 

21 1/2" (55cm) 

24" (61cm) 

21 1/2” 

[55cm] 

24” 

[61cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

6” [25cm] 

[15cm] 

10 3/4” 

[27cm] 

FSS222210/316-1 


16 gauge, type 316 stainless steel. Polished satin finish. Radius coved 

bowl corners. Integral corner splashguard. Can be installed in either 

left or right corners. Undercoated to reduce condensation and 

resonance. One piece wall hangers. 3 1/2" (89mm) grid strainer 

included for 2" IPS connection. 


21 1/2" x 21 1/2" x 10" (55cm x 55cm x 25cm) 

OVERALL SIZE: 

24" x 24" (61cm x 61cm) 

BACKSPLASH: 

12" (30cm) 

OVERALL HEIGHT: 

22" (56cm) 

NOTES: 


FSSOL223410/316-1 


16 gauge, type 316 stainless steel. Polished satin finish. Radius coved bowl 

corners. Integral splashguard left and rear sides. Drop front feature 

facilitates easy drainage of power driven floor maintenance equipment. 

Undercoated to reduce condensation and resonance. One piece wall 

hangers. 3 1/2" (89mm) grid strainer included for 2" IPS connection. 


21 1/2" x 33 1/2" x 10" (55cm x 85cm x 25cm) 

OVERALL SIZE: 

24" x 36" (61cm x 91cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


90 0311


1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

0311 

36” [91cm] 

33 1/2 [85cm] 

12” 

[30cm] 

36” [91cm] 

33 1/2 [85cm] 

21 1/2” 

[55cm] 

24” 

[61cm] 

1 1/4” [3cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

6” [25cm] 

[15cm] 

24” 

[61cm] 

21 1/2” 

[55cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

[25cm] 

10 3/4” 

[27cm] 

10 3/4” 

[27cm] 

FSSOR223410/316-1 



corners. Integral splashguard right and rear sides. Drop front feature 

facilitates easy drainage of power driven floor maintenance equipment. 

Undercoated to reduce condensation and resonance. 3 1/2" (89mm) 

grid strainer included for 2" IPS connection. 


21 1/2" x 33 1/2" x 10" (55cm x 85cm x 25cm) 

OVERALL SIZE: 

24" x 36" (61cm x 91cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


FSSL223410/316-1 



bowl corners. Integral splashguard left and rear sides. Undercoated to 

reduce condensation and resonance. One piece wall hangers. 3 1/2" 

(89mm) grid strainer included for 2" IPS connection. 


21 1/2" x 33 1/2" x 10" (55cm x 85cm x 25cm) 

OVERALL SIZE: 

24" x 36" (61cm x 91cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


91 

GENERAL 

INFORMATION 


DROP-IN SINKS 

MOP 

SERVICE SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

1 1/4” 

[3cm] 

36” [91cm] 

33 1/2 [85cm] 

24” [61cm] 

21 1/2” [55cm] 

24” 

[61cm] 

21 1/2” 

[55cm] 

1 1/4” [3cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

[25cm] 

21 1/2” 

[55cm] 

24” 

[61cm] 

1 1/4” [3cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

[25cm] 

12” 

[30cm] 

10 3/4” 

[27cm] 

FSSR223410/316-1 



bowl corners. Integral splashguard right and rear sides. Undercoated to 

reduce condensation and resonance. One piece wall hangers. 3 1/2" 

(89mm) grid strainer included for 2" IPS connection. 


21 1/2" x 33 1/2" x 10" (55cm x 85cm x 25cm) 

OVERALL SIZE: 

24" x 36" (61cm x 91cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


FSS2210/316-1 



corners. Integral splashguard back and side. Can be installed in either 

corner. Undercoated to reduce condensation and resonance. One piece 

wall hangers. 3 1/2" (89mm) grid strainer included for 2" IPS 

connection. 


21 1/2" x 21 1/2" x 10" (55cm x 55cm x 25cm) 

OVERALL SIZE: 

24" x 24" (61cm x 61cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


92 0311


0311 

1 1/4” 

[3cm] 

6” 

[15cm] 

12” 

[30cm] 

1 1/4” 

[3cm] 

24” [61cm] 

21 1/2” [55cm] 

21 1/2” 

[55cm] 

24” 

[61cm] 

1 1/4” [3cm] 

12” 

[30cm] 

22” 

[56cm] 

10” 

[25cm] 

12” 

[30cm] 

FSSO2210/316-1 



corners. Undercoated to reduce condensation and resonance. One piece 

wall hangers. Can be installed in either left or right corners. 3 1/2" 

(89mm) grid strainer included for 2" IPS connection. Comes with 

integral back splash and side splash. Drop front feature to facilitate easy 

drainage of power driven floor maintenance equipment. 


21 1/2" x 21 1/2" x 10" (55cm x 55cm x 25cm) 

OVERALL SIZE: 

24" x 24" (61cm x 61cm) 

BACKSPLASH: 

12" (30cm) 


22" (56cm) 

NOTES: 


93 

GENERAL 

INFORMATION 


DROP-IN SINKS 

MOP 

SERVICE SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

94 

Sewage Sampling

• Anti-splash rim 

• Backsplash 

• 14 gauge 

• Perforated flushing tube in bowl 

to minimize hand contact 

SECTION 13 

95 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 

SEWAGE 

SAMPLING 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Sewage Sampling 

21" 

[53cm] 

18" 

[46cm] 

14" 

[36cm] 

21" 

[53cm] 

18" 

[46cm] 

14" 

[36cm] 

6 3/4" 

[17cm] 

35" 

[89cm] 

15" 

[38cm] 

23" [58cm] 

27" [69cm] 

29" [74cm] 

2" [5cm] 

3" 

[8cm] 

3" 

3" [8cm] 

IPS THREAD 

28" [71 cm] 

18" [46cm] 

22" [56cm] 

45" [114cm] 

3" [8cm] 

3" 

[8cm] 

3" IPS THREAD 

6 3/4" 

[17cm] 

15" 

[38cm] 

35" 

[89cm] 

14" 

[36cm] 

18 5/16" 

[46cm] 

14" 

[36cm] 

18 5/16" 

[46cm] 

SSS1827 


14 gauge, grade 18-10, type 304 stainless steel. Polished satin finish. 

Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" O.D. 

flushing tube with a 1/2" NPS thread connection. 3" x 3" (76mm x 76mm) 

threaded waste outlet. 




FLOOR TO WORK SURFACE: 35" (89cm) 

NOTES: 


SSS1827SDS 










DRAINBOARD LOCATION: 

❑ SSS1827SDSL Drainboard left 

❑ SSS1827SDSR Drainboard right 

NOTES: 


96 0311

Sewage Sampling 

0311 

18" [46cm] 

22" [56cm] 

64" [163cm] 

3" [8cm] 

3" [8cm] 

3" 

IPS THREAD 

18" 

[46cm] 

14" 

[36cm] 21" 

[53cm] 

6 3/4" 

[17cm] 

15" 

[38cm] 

35" 

[89cm] 

14" 

[36cm] 

18 5/16" 

[46cm] 

SSS1827DDS 










NOTES: 


97 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 

SEWAGE 

SAMPLING 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

98 

Sacrarium Sinks

• Round and rectangular models 

• 18 and 20 gauge 

SECTION 14 

99 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 

SACRARIUM 

SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Sacrarium Sinks 

11 1/4" 

(29cm) 

9 3/16" 

(23cm) 

Hinge 

14" (36cm) 

16 3/4" (43cm) 

Hinge 

11 5/8" (30cm) 

13 5/8" (35cm) 

5" (13cm) 

6" (15cm) 

100 0311 

RS14 


18 gauge, type 304, 18-10 stainless steel. Self rimming. Polished satin 

finish. Undercoated to reduce condensation and resonance. Positive hold 

down clamping. Hinged top cover. Embossed cross. 

1 1/2" (38mm) duplex waste assembly included. 

COMPARTMENT SIZE: 14" diameter x 5" deep (36cm x 13cm) 

OVERALL SIZE: 16 3/4" diameter (43cm) 

NOTES: 




SS9126 


20 gauge, type 302, 18-8 stainless steel. Self rimming. Polished satin 

finish. Undercoated to reduce condensation and resonance. Positive 

hold down clamping. Hinged top cover. Embossed cross. 

3 1/2" (89mm) crumb cup waste assembly included, location center. 

COMPARTMENT SIZE: 9 3/16" x 11 5/8" x 6" (23cm x 30cm x 

15cm) 


NOTES: 



• Electronic specifications, reference www.kindred-commercial.com

0311 

101 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 

SACRARIUM 

SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

102 

Type 316 Laboratory

• Type 316, corrosion resistant 

• Single and double sink models 

with or without faucet ledge 

• Cup, scullery and art sinks 

• Wall hung basins 

SECTION 15 

103 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Type 316 Laboratory Sinks 

11 1/4˝ [29cm] 

11 5/8˝ [30cm] 

9 1/4˝ [24cm] 

6˝ 

[15cm] 

9 1/2˝ [24cm] 

7˝ [18cm] 

11 5/8˝ [30cm] 

13 5/8˝ [35cm] 

14 1/2˝ [37cm] 

16 5/8˝ [42cm] 

5 5/8˝ 

[14cm] 

6 13/16˝ 

[17cm] 

5 13/16˝ 

[15cm] 

8 5/16˝ 

[21cm] 

S9106/316- 


Single compartment sink less faucet ledge. 20 gauge, type 316, 



Includes factory applied rim seal, installation kit and waste 





❑ S9106/316-1 3 1/2" (89mm) crumb cup waste assembly. 

❑ S9106/316-3 1 1/2" (38mm) duplex waste assembly 

with rubber stopper. 

NOTES: 

• All type 316 sinks include type 316 waste assemblies 




S9407/316- 





Includes factory applied rim seal, installation kit and waste 



(24cm x 37cm x 18cm) 



❑ S9407/316-1 3 1/2" (89mm) crumb cup waste 

assembly. 



NOTES: 





104 0311


0311 

18 1/8˝ [46cm] 

16˝ [41cm] 

18 1/8" [46cm] 

16" [41cm] 

7" 

[18cm] 

10˝ [25cm] 

14" [36cm] 

16 1/8" [41cm] 

14˝ [36cm] 

16 1/8˝ [41cm] 

11 13/16" 

[30cm] 

8 1/16" 

[20cm] 

S6407/316- 




Undercoated to reduce condensation and resonance. Includes factory 

applied rim seal, installation kit and waste assembly, location center 

back. 




❑ S6407/316-1 3 1/2" (89mm) crumb cup waste assembly. 



NOTES: 





S6410/316P 





applied rim seal, installation kit and waste assembly. 




❑ S6410/316PCB-1 3 1/2" (89mm) crumb cup waste assembly, 

location center back. 

❑ S6410/316P-3 1 1/2" (38mm) duplex waste assembly with 

rubber stopper, location right rear. 

NOTES: 





105 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


18 1/8" [46cm] 

16" [41cm] 

18 1/8˝ [46cm] 

8" 

[20cm] 

16˝ [41cm] 

10˝ [25cm] 

18" [46cm] 

20 1/8" [51cm] 

18˝ [46cm] 

20 1/8˝ [51cm] 

11 13/16" 

[30cm] 

10 1/16" 

[26cm] 

9 1/16˝ 

[23cm] 

10 1/16˝ 

[26cm] 

S6808/316-1 





applied rim seal, installation kit and 

3 1/2" (89mm) crumb cup waste assembly, location center back. 


OVERALL SIZE: 18 1/8" x 20 1/8" (46cm x 51cm ) 

NOTES: 





S6810/316- 





applied rim seal, installation kit and waste assembly. 




❑ S6810/316-1 3 1/2" (89mm) crumb cup waste assembly, 

location center. 

❑ S6810/316-3 1 1/2" (38mm) duplex waste assembly with rubber 

stopper, location left rear. 

NOTES: 





106 0311


0311 

14 1/16" [36cm] 

18 13/16" 

[48cm] 

9 1/2" 

[24cm] 

7" [18cm] 

14" 

[36cm] 

7" [18cm] 

14 1/2" [37cm] 

16 5/8" [42cm] 

16" [41cm] 

18 1/8" [46cm] 

5 13/16" 

[15cm] 

8 5/16" [21cm] 

8 1/16" 

[20cm] 

9 1/16" 

[23cm] 

LBS9407/316- 





applied rim seal, Universal Installation System hardware and waste 





3 1/2" (89mm) crumb cup waste assembly 

❑ LBS9407/316-1/1 1 hole, 1 1/2" diameter 

❑ LBS9407/316-1/2 2 hole, 1 1/2" diameter, 4" centers 

❑ LBS9407/316-1 Custom (non-returnable) 



❑ LBS9407/316-3/2 2 hole, 1 1/2" diameter, 4" centers 


NOTES: 





LBS4607/316- 












❑ LBS4607/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 







NOTES: 





107 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


18 9/16" 

[47cm] 

14" 

[36cm] 

10" [25cm] 

20 5/8˝ [52cm] 

16˝ [41cm] 

7˝ [18cm] 

16" [41cm] 

18 1/8" [46cm] 

14˝ [36cm] 

16 1/8˝ [41cm] 

LBS4610/316P 





Includes factory applied rim seal, Universal Installation System 

hardware and waste assembly, location center. 





❑ LBS4610/316P-1/1 1 hole, 1 1/2" diameter 

❑ LBS4610/316P-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBS4610/316P-1 Custom (non-returnable) 


❑ LBS4610/316PC-3/1 1 hole, 1 1/2" diameter 

❑ LBS4610/316PC-3/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ LBS4610/316PC-3 Custom (non-returnable) 


NOTES: 





LBS6407/316- 

















❑ LBS6407/316-3-1 Custom (non-returnable) 


NOTES: 





108 0311


0311 

20 9/16˝ [52cm] 

16˝ 41cm] 

5˝ [13cm] 

20 1/2" [52cm] 

16" [41cm] 

7" [18cm] 

18˝ [46cm] 

20 1/8˝ [51cm] 

18" [46cm] 

20" [51cm] 

12 1/16˝ 

[31cm] 

14 1/16˝ 

[36cm] 

11 3/4" 

[30cm] 

10" 

[25cm] 

CAN 

ALBS6805/316-1 


ADA compliant, single compartment sink with faucet ledge. 

20 gauge, type 316, 18-8 stainless steel. Self rimming. Exposed 

surfaces are stain finished. Undercoated to reduce condensation and 

resonance. Includes factory applied rim seal, Universal Installation 

System hardware and 3 1/2" (89mm) crumb cup waste assembly, 

location rear corner for improved accessibility. 




❑ ALBS6805/316-1/1 1 hole, 1 1/2" diameter 

❑ ALBS6805/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset 

❑ ALBS6805/316-1 Custom (non-returnable) 


NOTES: 






requirements. Check ADA and local codes to ensure the unobstructed 

knee space is achieved after installation. 

LBS6807/316-1 





applied rim seal, Universal Installation System hardware and 









NOTES: 





109 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


20 1/2˝ [52cm] 

16˝ [41cm] 

8˝ [20cm] 

20 9/16" [52cm] 

16" [41cm] 

10" [25cm] 

18˝ [46cm] 

20˝ [51cm] 

18" [46cm] 

20 1/8" [51cm] 

11 3/4˝ 

[30cm] 

10˝ 

[25cm] 

9 1/16" 

[23cm] 

10 1/16" 

[26cm] 

LBS6808/316-1 





applied rim seal, Universal Installation System hardware and 









NOTES: 





LBS6810/316- 














1 1/2" (38mm) duplex waste assembly rubber stopper 





NOTES: 





110 0311


0709 

16 1/8” 

[41cm] 

8” 

[20cm] 

16 1/8” 

[41cm] 

10” 

[25cm] 

16” [41cm] 

18 1/8” [46cm] 

16” [41cm] 

18 1/8” [46cm] 

14” 

[36cm] 

14” 

[36cm] 

UCS4608/316P-1 



18-10 stainless steel. Exposed surfaces are satin finished. Undercoated 

to reduce condensation and resonance. Installation hardware and 




NOTES: 





UCS4610/316P-1 








NOTES: 





111 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


18 1/8” 

[46cm] 

8” 

[20cm] 

18 1/8” 

[46cm] 

10” 

[25cm] 

18” [46cm] 

20” [51cm] 

18” [46cm] 

20 1/8” [25cm] 

16” 

[46cm] 

16” 

[41cm] 

UCS6808/316P-1 








NOTES: 





UCS6810/316P-1 








NOTES: 





112 0311


0311 

18 7/16˝ [47cm] 

16˝ [41cm] 

10˝ [25cm] 

20 1/2˝ [52cm] 

16˝ [41cm] 

7˝ [18cm] 

14˝ [36cm] 

31 1/4˝ [79cm] 

14˝ [36cm] 

31 1/4˝ [79cm] 

11 3/4˝ 

[30cm] 

8 1/16˝ 

[20cm] 

D6410/316PCB-1 


Double compartment sink less faucet ledge. 18 gauge, type 316 , 



applied rim seal, installation kit and 3 1/2" (89mm) crumb cup waste 




NOTES: 





LBD6407/316-1 


Double compartment sink with faucet ledge. 20 gauge, type 316, 



applied rim seal, Universal Installation System hardware and 3 1/2" 





❑ LBD6407/316-1/1 1 hole, 1 1/2" diameter, 


❑ LBD6407/316-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBD6407/316-1/4 4 hole, as 3 hole above, 

plus 1 hole 4" to the right 

❑ LBD6407/316-1 Custom (non-returnable) 


NOTES: 





113 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


20 1/2˝ [52cm] 

16˝ [41cm] 

8˝ [20cm] 

20 13/16˝ [52cm] 

16˝ [41cm] 

10˝ [25cm] 

14˝ [36cm] 

31 1/4˝ [79cm] 

14˝ [36cm] 14˝ [36cm] 

31 1/4˝ [79cm] 

11 3/4˝ 

[30cm] 

8 1/16˝ 

[20cm] 

LBD6408/316-1 





factory applied rim seal, Universal Installation System hardware and 





❑ LBD6408/316-1/1 1 hole, 1 1/2" diameter, 


❑ LBD6408/316-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBD6408/316-1/4 4 hole, as 3 hole above, 

plus 1 hole 4" to the right 

❑ LBD6408/316-1 Custom (non-returnable) 


NOTES: 





LBD6410/316PCB- 











❑ LBD6410/316PCB-1/1 1 hole, 1 1/2" diameter, 


❑ LBD6410/316PCB-1/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBD6410/316PCB-1 Custom (non-returnable) 

1 1/2" (38mm) duplex waste assembly rubber stopper 

❑ LBD6410/316PCB-3/1 1 hole, 1 1/2" diameter, 


❑ LBD6410/316PCB-3/3 3 hole, 8" centerset, 1 1/2" diameter, 


❑ LBS6410/316PCB-3 Custom (non-returnable) 


NOTES: 





114 0311


0311 

4 1/2" 

(11cm) 3" 

(8cm) 

3 11/16" 

(11cm) 

6" 

(15cm) 

4 1/2" 

(11cm) 

6" (15cm) 

7 1/2" (19cm) 

5" 

(13cm) 

OC6/316 


20 gauge, type 316, 18-8 stainless steel. Self rimming. Exposed surfaces 

are sand-blast finished. Positive hold down clamping. 

1 1/2" (38mm) duplex waste assembly is integral (tailpiece optional*). 

COMPARTMENT SIZE: 3" x 6" x 3 11/16" (8cm x 15cm x 9cm) 


NOTES: 

• * These sinks do not include tailpiece. A type 316 tailpiece is available 

by ordering 315-9/316 





RC5/316 





COMPARTMENT SIZE: 5" x 4 1/2" (13cm x 11cm) 

OVERALL SIZE: 6" (15cm) 

NOTES: 







115 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


7 5/8" 

(19cm) 

4 1/2" 

(11cm) 

27 3/16" [69cm] 

24" [61cm] 

27 3/8" [70cm] 

27 3/16" 

[69cm] 

9" 

[23cm] 

14" 

[36cm] 

44 1/16" 

[112cm] 

21" 

[53cm] 

6" 

(15cm) 

27 3/16" [69cm] 

RC6/316 





COMPARTMENT SIZE: 6" x 4 1/2" (15cm x 11cm) 

OVERALL SIZE: 7 5/8" (19cm) 

NOTES: 







SL2424/316- 


16 gauge, type 316 stainless steel. Exposed surfaces are polished satin 

finished. Radius coved bowl corners. Waste assembly included. 






3 1/2" (89mm) crumb cup waste assembly, location center 

❑ SL2424/316-1/2 2 hole, 1 1/4" diameter, 8" centerset 

❑ SL2424/316-1 Custom (non-returnable) 

1 1/2" (38mm) duplex waste assembly with stand pipe and guard, 

location right rear. 




NOTES: 





116 0311


0311 

24" 

[61cm] 

35" 

[89cm] 

17" (43cm) 

8" (20cm) 

51 3/8" [130cm] 

49 11/16" [126cm] 

48" [122cm] 

3C 

36" (92cm) 

38" (96cm) 

27 3/16" 

[69cm] 

23" 

[58cm] 

21" 

[53cm] 

19" (48cm) 

SL2448/316- 



finished. Radius coved bowl corners. Waste assembly included. 






3 1/2" (89mm) crumb cup waste assembly, location center 



1 1/2" (38mm) duplex waste assembly with stand pipe and guard, 

location right rear. 




NOTES: 





ART36/316- 


18 gauge, type 316 stainless steel. Self rimming. Satin finished 

rim and bowl. Radius coved bowl corners. Undercoated to reduce 

condensation and resonance. Positive hold down clamping. 

Waste assembly, location center. 




❑ ART36/316-1 3 1/2" (89mm) crumb cup waste assembly. 

❑ ART36/316-3C 1 1/2" (38mm) duplex waste assembly 


NOTES: 





117 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


17" (43cm) 

8" (20cm) 

17" (43cm) 

8" (20cm) 

3C 

48" (122cm) 

50" (127cm) 

3C 

60" (152cm) 

62" (156cm) 

19" (48cm) 

19" (48cm) 

ART48/316- 





Waste assembly location center. 




❑ ART48/316-1 3 1/2" (89mm) crumb cup waste assembly 


with rubber stopper 

NOTES: 





ART60/316- 





Waste assembly location center. 




❑ ART60/316-1 3 1/2" (89mm) crumb cup waste assembly 


with rubber stopper 

NOTES: 





118 0311


0311 

3 3/4" 

[9.5cm] 

3 3/4" 

[9.5cm] 

8 1/4" 

[21cm] 

14" [36cm] 

16 1/2" [42cm] 

16" [41cm] 

18 1/2" [47cm] 

9 1/4" 

[23cm] 

7 1/4" 

[18cm] 

12" 

[30cm] 

17" 

[43cm] 

6" [15cm] 

11" 

[28cm] 

14" 

[36cm] 

19" 

[48cm] 

7" [18cm] 

CAN 

WHB1617/316-3 



finished. Radius coved bowl corners. 16 gauge side wall brackets. One 

piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with 

rubber stopper, location center back. 





❑ WHB1617/316-3/1 1 hole, 1 1/2" diameter 

❑ WHB1617/316-3/3 3 hole, 1 1/2" diameter, 4" centerset 

❑ WHB1617/316-3 Custom (non-returnable) 


NOTES: 










WHB1819/316-3 



finished. Radius coved bowl corners. 16 gauge side wall brackets. One 

piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with 

rubber stopper, location center. 





❑ WHB1819/316-3/1 1 hole, 1 1/2" diameter 

❑ WHB1819/316-3/3 3 hole, 1 1/2" diameter, 4" centerset 

❑ WHB1819/316-3 Custom (non-returnable) 


NOTES: 






119 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS


16” 

[41cm] 

10” 

[25cm] 

18” [46cm] 

40” [102cm] 

20 9/16” 

[52cm] 

LBSDB 6810/316-1 


20 gauge, type 316, 18-8 stainless steel. Self rimming, radius coved bowl 

corners and positive hold down clamping. Polished satin finish. 

Undercoated to reduce condensation and resonance. Sloped 

drainboards. Waste assembly included. 





-1 = 3 1/2" (89mm) crumb cup waste assembly, location center 

-3 = 1 1/2" (38mm) duplex waste assembly, waste location center 


❑ LBSDBL6810/316-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBR6810/316-1/1 1 hole, 1 1/2" diameter 

❑ LBSDBL6810/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 

8" centerset 

❑ LBSDBR6810/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 

8" centerset 

❑ LBSDBL6810/316-3/1 1 hole, 1 1/2" diameter 

❑ LBSDBR6810/316-3/1 1 hole, 1 1/2" diameter 

❑ LBSDBL6810/316-3/3 3 hole, 1 1/2" diameter, 4" centers, 

8" centerset 

❑ LBSDBR6810/316-3/3 3 hole, 1 1/2" diameter, 4" centers, 

8" centerset 

❑ LBSDB 6810/316-1 Custom (non-returnable) 



NOTES: 



for details. 


120 0311


0311 

In addition to our standard T316 range, we can also custom 

fabricate stainless sinks, countertops and cabinetry for 

Laboratory applications. 

DID YOU KNOW...using a standard drawn bowl in the design 

of a stainless steel countertop can significantly reduce 

fabrication costs. 

121 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

TYPE 316 

LABORATORY 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

122 

Urinals

• 18 gauge, type 304 stainless steel 

• Wall mounted 

• Waterless and 1.9 liter flush 

SECTION 16 

123 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

URINALS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

Urinals 

28 3/4" 

[73cm] 

28 3/4" 

[73cm] 

12 5/16" [31cm] 

12 5/16" [31cm] 

13 1/2" [34cm] 

13 1/2" [34cm] 

CMPX538 


Wall mounted stainless steel urinal. Satin finished 18 gauge (1.2mm) 

thick T304 stainless steel. Complete with waste fitting, flexible hose, flow 

regulator, dowels, back plate, urinal adapter coupling, flushometer 

adapter and stainless steel screws. A flow regulator at the flexible hose 

offers a consistent flush performance within 2-4 bar pressure 

fluctuations in the pipe work. 

OVERALL SIZE: 28 3/4" x 12 5/16" x 13 1/2" (73cm x 31cm x 34cm) 

NOTES: 


requirements. Check ADA and local codes to ensure installation 

compliance with ADA guidelines. 


• For use with a concealed flushometer with a 3/4" spud 

• 0.5 gallons per flush/1.9 liters per flush performance 

CMPX538WF 


Wall mounted stainless steel water-free urinal. Satin finished 

18 gauge (1.2mm) thick T304 stainless steel. Complete with diaphragm 

style water-free waste assembly, dowels, back plate and stainless steel 

screws. 

Membrane has a maximum flow rate of 12 L/min. Waterfree membrane is 

made from silicone rubber and is resistant to standard cleaners. Avoid 

the use of hydrocarbons (oils, fats, gas, etc) as they can cause 

premature failure of the membrane. 

OVERALL SIZE: 28 3/4" x 12 5/16" x 13 1/2" (73cm x 31cm x 34cm) 

NOTES: 


requirements. Check ADA and local codes to ensure installation 

compliance with ADA guidelines. 


CMPX538RD 

REPLACEMENT RUBBER DIAPHRAGM 

This system works without sealing liquid or energy inputs. The service 

life lies between 8,000 and 10,000 uses, depending on the type of 

installation. 

124 0311

Environmental Benefits of the Waterless Urinal 

Water conservation is essential to the long-term sustainability of our 

environment. It is important that this is taken into consideration when 

choosing plumbing fixtures. 

Also, the use of recyclable materials and the reduction of waste that is 

sent to landfill sites is critical to the environment for years to come. 

Stainless steel is a great choice! 

We are proud to introduce both a 1.9 liter flush, as well as waterless 

stainless steel urinals. 

The functioning of this waterless system is based on a rubber 

membrane made of silicon-based elastomer, which works on the same 

principle as a tire valve. This membrane, which is made of a special 

water-repellent material, functions as an odor trap. The membrane lets 

liquids flow out and then closes immediately. 

Waterfree membrane is made from silicone rubber and is resistant to 

standard cleaners. Avoid the use of hydrocarbons (oils, fats, gas, etc) 

as they can cause premature failure of the membrane. 

0311 

74mm 

35mm 12mm 27mm 

39mm 

24mm 

26mm 

4mm 

4mm 

Advantages: 

- Low maintenance costs thanks to eliminated water charges 

- No disposal costs 

- No need for water supply for flushing purposes 

- Low cleaning costs 

- No accumulation of urine scale 

- Hygienic and with neutral odor 

- Resistant to deliberate damage - there is no sensor equipment to 

vandalize 

- Simple to install and clean 

- Fast replacement of membrane 

Cleaning: 

Users are recommended to clean the urinal once a day with a mild 

alkaline all-purpose cleaner (spray-on type), which should be left to act 

for a moment and then wiped off with a damp cloth - or by rinsing with 

a little water when necessary. An alcohol-based window cleaning 

product can also be used. 

Operating efficiency: 

The following calculation shows just how cost-effective such as system 

can be, and how its low running costs ensure that the urinal soon pays 

for itself. 

(litres per day) 

800000 

700000 

600000 

500000 

400000 

300000 

200000 

100000 

0 

109500 

146000 

182500 

100 flushing 

operations 

per day 

219000 

292000 

265000 

200 flushing 

operations 

per day 

438000 

584000 

730000 

400 flushing 

operations 

per day 

3 Liter 

4 Liter 

5 Liter 

Waterless urinals - an investment in the future and in our environment. 

125 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

URINALS 

DRAINBOARD 

SINKS 

SCULLERY 

SINKS

126 

Custom Fabrication

• Custom stainless steel fabrication 

• Built to specification 

SECTION 17 

127 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SCULLERY 

SINKS

Custom Fabrication 

Kindred Commercial has full custom stainless steel fabrication capabilities. 

We custom fabricate products to meet our customer’s specifications. 

Modifications can be made to most of our standard catalogued products. 

We offer a wide range of custom products. 

• Countertops 

• Drop-In & Undermount Sinks 

• Drainboard Sinks 

• Scullery Sinks 

• Wallmount Hand Wash Stations 

• Surgical Scrub Stations 

• Mop Sinks (Janitorial) 

All of our custom fabricated products are polished to a # 4 satin finish and can be made to meet the material specification you require 

(T304 or T316, 14 to 18 gauge). Continuous weld construction is available for pharmaceutical applications if required. 

If you can sketch it, we can build it. 

As a general rule of thumb, the more information we receive with custom fabricated product requests, the better! 

The following pages provide explicit details for requesting specific types of custom fabricated products. 

Saniguard ® Product Protection 

The addition of Saniguard ® product protection is available for sinks in this catalogue as well as custom fabricated sinks. However, we 

only recommend this coating be added to hand wash basins. See p. 76 for more information on Saniguard ® product protection. For a 

quotation please call our Customer Service Representatives directly. 

128 0311

Custom Sinks and Sinks with Drainboards Checklist 

We can custom make any sink to your specification, for both 

Drop-In and Undermount applications. 

• Application: ❑ Drop-In ❑ Undermount 

• With Faucet Ledge: ❑ Yes ❑ No 

SINK BOWL #1 

• Compartment Size: (Front-to-Back) 

(Left-to-Right) 

(Depth) 

Position (if multiple bowls) 

SINK BOWL #2 (if required) 



(Depth) 


SINK BOWL #3 (if required) 



(Depth) 


B. The countertop deta 

• Type of Stainless Steel❑ T304 ❑ T316 

• Steel Gauge ❑ 18 ❑ 16 ❑ 14 

❑ Other (specify): 

0311 

• Drain Fitting: ❑ 3 1/2" (Includes 1130 waste fitting) 

❑ 1 1/2" (Includes 100 waste fitting) 

❑ 1 1/4" (Accepts 1 1/4" drain, not included) 


* Note Type 316 wastes are supplied with Type 316 sink bowls. 

• Drain Position: ❑ Center ❑ Center-Back 

❑ Back-Right ❑ Back-Left 

• Additional Drain Options: 

❑ Integral Overflow 

❑ Standpipe (1 1/2" drains only) 

❑ Standpipe & Corner Guard (1 1/2" drains only) 

• Is a sloped drainboard required: ❑ None ❑ Left 

❑ Right ❑ Left & Right 

• Overall Dimensions: 

* Allow a minimum of 1" for rims. 

* Allow a minimum of 4" for faucet ledge. 

Front-to-Back: 

Left-to-Right: 

• Faucet Hole Drilling Requirements: 

* Please include the location of the holes, the number of holes 

required and the diameter of the holes. Provide a sketch if 

necessary. 

129 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SCULLERY 

SINKS

Custom Countertop Checklist 

Tops are available in all sizes and configurations, with sink bowls 

integrally welded into the top. 

Tops may be flat or slope to the sink. All sloped tops have 

a 6mm drop to the sink bowl. 

A. The sink compartment specifications: 



(Depth) 

• # of compartments required: 

• Type of Stainless Steel ❑ T304 ❑ T316 

• Steel Gauge ❑ 18 ❑ 16 ❑ 14 









• Additional Drain Options: 

❑ Integral Overflow 

❑ Standpipe (1 1/2" drains only) 

❑ Standpipe & Corner Guard (1 1/2" drains only) 

B. The countertop details: 

The position of the sink compartments will be centered 

horizontally unless specified otherwise. 

• Top should be: ❑ Flat ❑ Slope to the sink 

* Note that the maximum sloped area that can be created 

from the sink bowl outward is 32" (81cm). The remaining 

top surface to the edge of the sink will be flat. 

• Backsplash location(s): ❑ Back ❑ Left ❑ Right 

• Backsplash Height(s): 

• Backsplash Style (see Options page 126): 

• Rim Style (see Options page 126): 

• Overall Dimensions of the top: 

* Allow a minimum of 2" for rims. 

* Allow a minimum of 1 1/2" for splashes. 

* Allow a minimum of 4" for faucet ledge. 



• Top is to be installed onto: 

❑ Cabinet – existing or supplied by others 

❑ Cabinet – to be supplied by Kindred Commercial 

(please provide sketch) 

❑ Legs and if so ❑ Stainless Steel or ❑ Chrome Plated 

• Dimension from floor to work surface: 

• Core Material: ❑ Particle Board 

❑ Plywood 

❑ Channel Construction 

❑ Other (specify) 

Any other information or requirements should be provided in the 

form of a sketch with written detail. We will review all requests 

and request clarification if required. 

130 0311

Custom Scullery Checklist 

In addition to our standard scullery sinks, we offer scullery sinks 

fabricated to your specification. 

• Compartment Size: (Front-to- Back) 


(Depth) 

• # of compartments required: 

• Type of Stainless Steel ❑ T304 

❑ T304 (All radius coved corners) 

❑ T316 

• Steel Gauge ❑ 18 ❑ 16 ❑ 14 







0311 



• Is a sloped drainboard required: ❑ None ❑ Left 

❑ Right ❑ Left & Right 

• What type of edges (rims) are required: 

# of edges (considering number of backsplashes): 

❑ Standard 1 5/8" rolled edges 

❑ Other Type: 

Dimensions: 

• Backsplash location: ❑ Back ❑ Left ❑ Right 

• Backsplash Height: 

• Backsplash Style 

❑ Standard, Rolled with return, 1 1/2" thick with ___ " return 

❑ Other (see Options page): 

• Overall Dimensions of the top: 



• Legs 

❑ Stainless Steel or ❑ Chrome Plated 

• Faucet Hole Drilling Requirements: 

* Please include the location of the holes, the number of holes 

required and the diameter of the holes. Provide a sketch if 

necessary. 

131 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SCULLERY 

SINKS

Custom Sink Options 

Back / Side Splash options: Rim style options: 

1 - Tête biseautée 

25mm 

25mm 

(.99") 

(.99") 

13mm 

(.51") 

2 - Tête pliée avec repli 

25mm 

(.99") 25mm 

(.99") 

3 - Tête arrondie 

38 38àto 51mm 

(1.5" àto 2.01") 2.01" 

19mm R 

(.75" (.75" R) R) 

19mm R 

(.75" R) 

4 - Tête arrondie avec repl 

45° 

Comme as specified précisé 

Comme précisé 

13mm 

as specified 6 ou 6 or 99mm mm R 13mm 

R 

Comme 

as specified 

précisé 

(.51") 

(.24" ou or .36" R) (.51") 

R) 

Comme 

as specified 

précisé 

38 to à 51mm 

(1.5" to à 2.01") 

13mm 

(.51") (.51") 

5 - Tête biseautée avec repli 

13mm (.51") 

Comme 

as specified 

précisé 

19mm R 

(.75" R) 

25mm 

25mm 

(.99") 

(.99") 

38 38 à 51mm to 51mm 

(1.5" (1.5" à 2.01") to 2.01" 

as specified 

Comme précisé 

1a - Cintré à tête biseautée 

1 - Feathered 1a - Feathered (Up on Rad) 

25mm 

25mm (.99") 

(.99") 

2a - Cintré à tête pliée avec repl 

2 - Boxed 2a - Boxed (Up on Rad) 

6 ou 9 mm R 

6 or 9mm R 

(.24" ou .36" R) 

(.24" or .36" R) 

6 or ou9mm 9 mm R R 

(.24" or ou .36" .36" R) R) 

19mm R 

(.75" R) 

3a - Cintré à tête arrondie 

3 - Rolled 3a - Rolled (Up on Rad) 

38 to à 51mm 

(1.5" to à 2.01") 

Comme 

as specified 

précisé 

19mm R 

6 or ou9mm 9 mm R R 19mm R Comme précisé 

(.75" R) as specified 

(.24" or ou .36" .36" R) R) (.75" R) 

4 - Rolled with return 4a - Rolled w/return (Up on Rad) 

4a -Cintré à tête arrondie avec repli 

45° 

13mm 

(.51") 

5 - Splayed 5a - Splayed (Up on Rad) 

5a - Cintré à tête biseautée 

13mm (.51") 

Comme as specified précisé 

38mm 38mm 

(1.5") 

132 0311 

Flat 

Plat 

38mm 

(1.5") 

Boxed Plat avec repli 

38mm 

(1.5") 

Veed Flat 

Plat relevé 

Marine 

Arrondi 

45° 45° 

35mm 

(1.38") 

32mm 

(1.26") 

Marine 

25mm 

(.99") (.99") 

38mm 

(1.5") 

Marine - Deep 

Marine - profond 

Rolled 

13mm (.51") (.51") 

13mm (.51") 

13mm (.51") 

6mm (.24") 

30° 

13mm (.51") 

13mm (.51") (.51") 

19mm R R (.75" (.75" R) R) 

13mm (.51") (.51")

Other Custom Products 

0311 

For customization to any of our standard catalogue 

products, please provide us with a sketch or a copy of 

our specification sheet indicating all changes and 

modification required. 

133 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SCULLERY 

SINKS

134 

Securityware Products

• All Kindred Commercial Securityware fixtures 

are fabricated from robust 14 gauge stainless 

steel for durability and superior performance in 

extreme conditions. 

• Stainless steel by nature is hygienic and is an 

easy to clean material …. well suited to 

repetitive and high use applications. 

• Kindred Commercial Securityware fixtures 

feature seamless construction for high 

resistance to vandalism and tampering. 

• All Kindred Commercial Securityware plumbing 

fixtures are cUPC certified. 

General Information . . . . . . . . . . . . . . . . . . . . 134 

Combi Units, Water Closets & Urinals . . . . . 139 

Wash Basins & Sinks . . . . . . . . . . . . . . . . . . . . 145 

Drinking Fountains. . . . . . . . . . . . . . . . . . . . . . 157 

Accessories & Shower Panels . . . . . . . . . . . . . 161 

SECTION 18 

135 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SECURITYWARE

General Information 

ORDERING PROCESS 

The Kindred Commercial Securityware offering includes washroom fixtures, fittings and accessories for use in extreme 

use applications such as prisons and public restrooms. Fixtures are constructed of heavy 14 gauge, type 304 stainless 

steel, with seamless welds for high vandal resistance. Products are finished in easy to maintain satin, with hygienic mirror 

finish seats on water closets and combi units. Kindred Commercial Securityware standard valves are constructed of brass 

for superior longevity. 

Please see our Securityware Catalogue (61735) for information on how to order, or reference our website www.kindred-commercial.com for more 

information and a link to our specifying service ATS. 

Please contact us for pricing information: 

Telephone: 1-866-687-7465 

email: info.fkc@franke.com 

CORROSION RESISTANCE INFORMATION 

In the presence of oxygen, stainless steel forms a protective chromium oxide film. This is due to the addition of chromium in excess of 11.5% during 

the alloying stage. The further addition of nickel, in excess of 7%, gives superior corrosion resistance to the 300 series. 

Maximum corrosion resistance is obtained with the addition of molybdenum to form TYPE 316, designed to resist attack under highly corrosive conditions. 

As implied, stainless steel requires oxygen in order to be stainless. There are ways to make oxygen more plentiful. For example, an acid solution which 

might otherwise corrode the steel, can be aerated to maintain the protective film. 

Corrosion, or rusting, often reported soon after installation, has two main causes: 

1. Contact Corrosion occurs when a piece of common carbon steel, copper, brass or other foreign material contacts the sink and destroys the passive 

protective film. 

2. Pitting or Pinhole Corrosion occurs when chlorides attack the steel forming pits where galvanic cells are created. Acid chlorides are particularly 

severe, but even chlorine bleach can cause failure. The fixture should be rinsed thoroughly after such contact. 

For a detailed listing of corrosive materials and steel resistance levels, please go to: http://www.kindred-commercial.com 

136 0311


NOMENCLATURE GUIDE FOR FIXTURES 

Combi Units 

HDCU1318 Heavy Duty Combi Unit 13” front to back x 18” left to right basin 

Water Closets 

HDWC2414 Heavy Duty Waste Closet 24" front to back x 14" left to right 

Urinals 

HDU1314 Heavy Duty Urinal 13” front to back x 14” left to right 

Wash Basins 

HDSB1318 Heavy Duty Scrub Basin 13” front to back x 18” left to right 

HDPWB1518 Heavy Duty Public Wash Basin 15” front to back x 18” left to right 

AHDWB1918 Accessible Heavy Duty Wash Basin 19” front to back x 18” left to right 

Drinking Fountains 

HDDF1818 Heavy Duty Drinking Fountain 18” front to back x 18” left to right 

Mop & Service Sinks 

HDWSS1821 Heavy Duty Wall Service Sink 18” front to back x 21” left to right 

HDFSS1821 Heavy Duty Floor Service Sink 18” front to back x 21” left to right 

Accessories 

RH320 Roll Holder 

HDTX674 Heavy Duty Triple roll holder 

TD350 Tissue Dispenser 

GB445 Garbage Bin 

SD300 Soap Dispenser 

NOMENCLATURE GUIDE FOR OPTIONS 

Fixture orientation 

L Left 

R Right 

C Center 

Installation Method 

RM Rear mount with threaded rod and hardware included. 

FM Front mount with hidden access. Tamper resistant security screws and wall hanger bracket included. 

WS Wall Sleeve 

MT Metal Cutout Template 

Valves 

SV Single temperature air operated valve 

DV Dual temperature air operated valve 

MV2 Manifold valve to control 2 fixtures 

FVC Flush Valve Combination Unit 

FVU Flush Valve Urinal 

FVT Flush Valve Water Closet (Toilet) 

0311 

137 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


INSTALLATION 

Kindred Commercial Securityware fixtures are intended for vandal resistant installation, with tamper proof hardware. Depending on the fixture type 

installation methods may be: 

a. Rear mount through the wall, for use when a pipe chase is available. 

b. Or, front mount using wall hanger brackets when the fixture is not serviceable from a pipe chase. 

Please refer to the product specific page for more information on installation methods, rough-ins, hardware, and fittings options. 

CARE AND MAINTENANCE 

Kindred Commercial’s endorsement of stainless steel fixtures is based on over 50 years of manufacturing experience. Over this time we have accumulated 

a wealth of knowledge with respect to care of this product. We would like to share some of this insight with you, as well as advise you of some 

recommended cleaning materials and instructions for maintaining our product. 

To clean your fixture, use the mildest cleaning procedure that will do the job effectively. DO NOT USE ANY ABRASIVE MATERIALS ON MIRROR FINISH. 

On satin finish surfaces we recommend using a very mild abrasive cleanser such as Old Dutch ® or Cameo ® . 

Always rinse the fixture after using a cleaning agent, and wipe the fixture dry to discourage any water spotting. 

Metallic scouring pads and steel wool pads must never be used to clean your fixture, as they will leave a residue of small iron particles. They may not even 

be readily visible, but they most certainly will lead to corrosion of the fixture. (Non metallic Scotch-Brite ® scouring pads are available for this purpose.) 

We don’t recommend that you use chlorine bleach in your stainless steel fixture, as chlorine will attack the protective layer that makes stainless steel 

truly stainless. The risk of damage is proportional to the concentration of the chlorine and the duration of exposure between the fixture and chlorine 

agent. Always dilute any antibacterial product used and wipe up any spills. Note: some antibacterial soaps contain a chlorine compound. 

Any cleaning or scrubbing to remove stubborn stains from the inside of the fixture bowl should follow the direction of the grain line. Any scrubbing 

across the grain will show as a scratch. Scrubbing in the same direction as the polish lines will blend in any surface scratches. 

Stains and water spots anywhere on the fixture can be removed with a small amount of Peek on a damp cloth. Rub the Peek over the fixture surface. 

Rinse and towel dry. 

138 0311


LIMITED BUYER WARRANTY 

Kindred Commercial Securityware fixtures carry a five year warranty against manufacturer’s defects. 

Kindred Commercial Securityware fittings carry a one year warranty against manufacturer’s defects. 

PRODUCT CERTIFICATION 

Kindred Commercial strongly believes in product testing and certification. We strive to have our products designed and tested to meet all 

applicable standards. 

All Kindred Commercial Securityware Combination Units, Urinals and Water Closets (toilets) are certified and tested to 

ASME A119.12.2-2008/CSA B45.1-08 standards. 

All Kindred Commercial Securityware Combination Wash Basins and Sinks are certified and tested to 


All Kindred Commercial Securityware valves tested to ASME A112.18.1-2005/CSA B125.1-05 standards. 

0311 

139 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE

140 

Securityware Products - 

Combi Units, Water Closets & Urinals

• 14 gauge type 304 

• Combi Units 

• Water Closets 

• Urinals 

SECTION 18 

141 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SECURITYWARE

Securityware Products - Combi Units, Water Closets & Urinals 

30 1/2" 

(78cm) 

36 1/2" 

(93cm) 

2 

1 

14" (36cm) 

18" (46cm) 

HDCU1318C-DV shown 

7 

12 3/4" 

(32cm) 

17 3/4" 

(45cm) 

8 

6 

32 1/2" 

(83cm) 

15" 

(38cm) 

3 

4 

5 

HDCU1318- - - - 

Heavy Duty Combi Unit 

Fixture Specification: 

This Heavy Duty Combination Toilet/Lavatory is designed for areas requiring 

the utmost in vandal resistance. The fixture is fabricated from heavy 14 

gauge type 304 18-10 stainless steel and is designed to withstand loads of 

5000lbs (2267kg) without permanent damage. The cabinet and drawn 

bowls are seamlessly welded and are polished to a satin finish. The toilet 

seat is polished to a sanitary mirror finish. Internal piping is also 14 gauge 

type 304 18-10 stainless steel. 

Lavatory Oval Bowl (FB x LR x D): 

9 1/2" (24cm) x 14 3/4" (38cm) x 5" (13cm) 

Toilet 

Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI 

flow pressure. The toilet was tested and certified as a low water consumption 

toilet using 1.6gpf (6 litres). The trap will pass a 2 1/8" ball and has a seal 

of 3.5" min. The waste outlet extends a minimum of 3" behind the fixture 

and has a plain end OD of 2 3/8". 

The entire fixture is tested and certified to: 


Installation: 

These fixtures are designed to be installed onto finished walls which 

are serviceable from a pipe chase. Installation is achieved by threading six 1/2" 

(13mm) diameter threaded anchor rods to the back of the fixture. The anchor 

rods are then secured on the chase side of the wall by means of the supplied nuts 

and washers. (Standard included hardware is for walls up to 8" (20cm) thick). 

For existing walls, an optional metal cutout template is available. For new 

block (CMU) or poured concrete walls, an optional wall sleeve is available. 

Available Controls: 

The basin is controlled with an air-operated self closing valve with a non-hold 

open feature. Flow time is adjustable from approximately 5 to 60 seconds and 

has a flow rate of 0.5gpm (1.9 lpm). The valve is operated by a vandal resistant 

push button which requires less than 5lbs to operate. The valve can be mounted 

up to 10 feet (3 meters) away from the push button. Valve conforms to the 

requirements of ASME A112.18.1-2005/CSA B125.1-05. See basin valve 

options for available configurations. 

FIXTURE OVERVIEW: 

1 Bubbler 

2 Integral Soap Dish 

3 Toilet Roll Holder 

4 Lav Waste Outlet 

5 Toilet Waste Outlet 

6 Threaded Mounting Locations (6) 

7 Lav Push Buttons 

8 Waste Air Vent 

142 0311


24 1/8" 

(61cm) 

15" 

(38cm) 

0311 

14" (36cm) 

11 1/2" 

(29cm) 

HDWC2414-RM shown 

15" 

(38cm) 

24 1/8" (61cm) 

1 

2 

HDWC2414-RM- 

Heavy Duty Water Closet 


This Heavy Duty Water Closet (Toilet) is designed for areas requiring the 

utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge 

type 304 18-10 stainless steel. The elongated bowl is drawn and seamlessly 

welded and polished to a satin finish. The toilet seat is polished to a sanitary 

mirror finish. Internal piping is also 14 gauge type 304 stainless steel. 

Toilet 

Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI 

flow pressure. The toilet was tested and certified as a low water consumption 

toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" ball and has a 

seal of 3.5" min. The waste outlet extends a minimum of 3" behind the 

fixture and has a plain end OD of 2 3/8". Flush valve connection is 1 1/2” 

FIPT rear spud. 

The entire fixture is tested and certified to: 


Installation: 

These fixtures are designed to be installed onto finished walls which are 

serviceable from a pipe chase. Installation is achieved by threading (5) 1/2” 

(13mm) diameter threaded anchor rods to the back of the fixture. The 

anchor rods are then secured on the chase side of the wall by means of the 

supplied nuts and washers. (Standard included hardware is for walls up to 8" 

(20cm) thick). 




1 1 1/2" FIPT Flush Connection 

2 2 3/8" OD Plain End Waste Connection 

143 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


12 1/2" 

(32cm) 

19" 

(48cm) 

8" 

(20cm) 

14" (36cm) 

HDU1314-RM shown 

1 

1" 

(3cm) 

2 

3 

HDU1314-RM- 

Heavy Duty Urinal 


This Heavy Duty Urinal is designed for areas requiring the utmost in vandal 

resistance. The fixture is fabricated from heavy 14 gauge type 304 18-10 

stainless steel. The fixture is seamlessly welded and polished to a satin finish. 

The urinal has an integral flushing rim for sanitary wash down. Includes integral 

beehive strainer and 1 1/2” removable P-Trap (concealed within shroud). 

Urinal Fixture (FB x LR x D): 

12 1/2" (32cm) x 14" (35cm) x 27" (68cm) 

The fixture is tested and certified to ASME A112.19.2-2008/CSA 

B45.1-08 as a Low Consumption Urinal using 1.0 gpf / 3.8 lpf or less. 

Installation: 


serviceable from a pipe chase. Installation is achieved by threading 4 1/2” 


anchor rods are then secured on the chase side of the wall by means of the 

supplied nuts and washers. (Standard included hardware is for walls up to 8" 

(20cm) thick). 




1 3/4" Back Spud Connection 

2 Beehive Strainer 

3 1 1/2" OD Waste 

144 0311


0311 

145 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE

146 


Wash Basins & Sinks

• 14 gauge type 304, 18-10 stainless steel 

• Front and Rear Mounted Security Basins 

• Public Use Basins 

• Front and Rear Mounted Service Sinks 

SECTION 18 

147 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SECURITYWARE

Securityware Products - Wash Basins & Sinks 

12 1/2" 

(32cm) 

14 1/2" 

(37cm) 

1" (3cm) 

4" (10cm) 

5" (13cm) 

HDSB1318-RM-DV shown 

1 

18" (46cm) 

2 3 

5 

6 

4 

10 1/2" (27cm) 

HDSB1318-RM- - 

Heavy Duty Security Basin 


This Heavy Duty Security Basin is designed for areas requiring the utmost 

in vandal resistance. The fixture is fabricated from heavy 14 gauge type 304 

18-10 stainless steel. It is seamlessly welded and polished to a satin finish. 

Compartment Size: (FB x LR x D): 

12 1/2" (32cm) x 18" (46cm) x 14 1/2" (37cm) 

Bowl Size: (FB x LR x D): 

9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 

The fixture is tested and certified to: 


Installation: 


serviceable from a pipe chase. Installation is achieved by threading (4) 1/2" 

(13mm) diameter anchor rods to the back of the fixture. The anchor rods are 

then secured on the chase side of the wall with supplied hardware. (Standard 

included hardware is for walls up to 8" (20cm) thick). 





open feature. Flow time is adjustable from approximately 5 to 60 seconds and 

has a flow rate of 0.5 gpm (1.9 lpm). The valve is operated by a vandal resistant 

push button which requires less than 5lbs to operate. The valve can be mounted 

up to 10 feet (3 meters) away from the push button. Valve conforms to the 

requirements of ASME A112.18.1-2005/CSA B125.1-05. See basin valve 

options for available configurations. 



2 Bubbler 

3 Push Button Actuator 

4 1 1/2" OD Plain Outlet Brass Waste 

5 Waste Air Vent 

6 Threaded Mounting Locations (4) 

AVAILABLE WALL MOUNTED ACCESSORIES: 

Security Mirror (12" x 16") M1216 



Centrefeed Paper Roll Box TD350 

Soap Dispenser SD300 

148 0311


0311 

13 1/2" 

(34cm) 

2" (5cm) 

4" 

(10cm) 

HDSB1418-FM-DV shown 

2 1 3 

18" (46cm) 

5 

6 

12"(30cm) 

4 

HDSB1418-FM- - 

Heavy Duty Security Basin 


This Heavy Duty Security Basin is designed for areas requiring the utmost 




13 1/2" (34cm) x 18" (46cm) x 16" (41cm) 


9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 



Installation: 

These fixtures are designed to be installed onto finished walls which are not 

accessible from a pipe chase. Installation is achieved by means of a wall 

hanger bracket and lower mounting holes. Mounting hardware and plumbing 

are all self contained and only accessed by a removable panel. The panel is 

secured with tamper resistant screws. 



open feature. Flow time is adjustable from approximately 5 to 60 seconds. 

The valve is operated by a vandal resistant push button which requires less 

than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) 

away from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Bubbler 



4 1.5” P Trap 

5 Removable Panel 

6 Wall Hanger Bracket 



DRAINBOARD 





149 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

SINKS 

SECURITYWARE


18 1/2" 

(47cm) 

3" (8cm) 

AHDSB1918-RM-SV shown 

1 

18" (46cm) 

2 

17" 

(43cm) 

4 

3 

5" 

(13cm) 

AHDSB1918-RM- - 

Accessible Heavy Duty Security Basin 


This Heavy Duty Security Wheel Chair Accessible Basin is designed for areas 

requiring the utmost in vandal resistance. The fixture is fabricated from heavy 

14 gauge type 304 18-10 stainless steel. It is seamlessly welded and 

polished to a satin finish. 


18 1/2" (47cm) x 18" (46cm) x 17" (43cm) 


9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 



Installation: 










open feature. Flow time is adjustable from approximately 5 to 60 seconds 

(depending on water temperature). The valve is operated by a vandal 

resistant push button which requires less than 5lbs to operate. The valve 

can be mounted up to 10 feet (3meters) away from the push button. Valve 

conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05. 

See basin valve options for available configurations. 


1 Bubbler 


3 1.5" OD Waste Elbow 

4 

Waste Breather Tube 







150 0311


0311 

18 1/2" 

(47cm) 

3" (8cm) 

5 

AHDSB1918-FM-SV shown 

2 1 3 

18" (46cm) 

17" 

(43cm) 

6 4 

5" 

(13cm) 

AHDSB1918-FM - 

Accessible Heavy Duty Security Basin 


This Accessible Heavy Duty Security Basin is designed for areas requiring the 


type 304 18-10 stainless steel. It is seamlessly welded and polished to a 

satin finish. 


18 1/2" (47cm) x 18" (46cm) x 17" (43cm) 


9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 



Installation: 










than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) 

away from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Bubbler 



4 1.5” P Trap 





DRAINBOARD 





151 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

SINKS 

SECURITYWARE


15" 

(38cm) 

4" 

(10cm) 

1" (3cm) 

18" (46cm) 

HDPWB1518 

2 1 

4 

17" 

(43cm) 

5" 

(13cm) 

3 

HDPWB1518 

Heavy Duty Public Wash Basin 


This Heavy Duty Public Wash Basin is designed for areas requiring the 


type 304 18-10 stainless steel and polished to a satin finish. 

These fixtures are designed to be installed onto finished walls by means of 

a wall hanger bracket. Supply and waste lines must be roughed out of wall 

for connection. Wall anchor hardware (bolts and anchors) are not included. 


15" (38cm) x 18" (53cm) x 17" (43cm) 


9 1/2" (24cm) x 16" (41cm) x 5" (13cm) 



Installation: 



hanger bracket and lower mounting holes. 


1 Deck Faucet Holes (please specify) 


3 1 1/4” Grid Strainer 

4 








152 0311


0311 

18" 

(46cm) 

30" 

(76cm) 

1" 

(3cm) 

12" 

(30cm) 

10" 

(25cm) 

1 

HDWSS1821-RM-SV shown 

21" (53cm) 

2 

2 

3" 

(8cm) 

18" (46cm) 

3 

HDWSS1821-RM- - 

Heavy Duty Wall Service Sink 


This Heavy Duty Wall Service Sink is designed for areas requiring the utmost 



Standard waste is a 2 3/8” OD Plain End Elbow. 


18" (46cm) x 21" (53cm) x 30" (76cm) 


16" (41cm) x 19" (48cm) x 10" (25cm) 



Installation: 




then secured on the chase side of the wall with supplied hardware. For 

existing walls, an optional metal cutout template is available. For new 


(Standard included hardware is for walls up to 8" (20cm) thick). 




which has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal 

resistant push button which requires less than 5lbs to operate. The valve can 

be mounted up to 10 feet (3meters) away from the push button. Valve 

conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05. See 

basin valve options for available configurations. 


1 Spout 


3 2 3/8" OD Plain End Elbow Waste 

4 Threaded mounting locations (x6) 

153 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


20" 

(50cm) 

3" 

(8cm) 

12" 

(30cm) 

HDWSS202-FM-SV-LD shown 

1 

21" (53cm) 

2 

30" 

(76cm) 

10" 

(25cm) 

3 4 

HDWSS2021-FM- - 

Heavy Duty Wall Service Sink 


This Heavy Duty Wall Service Sink is designed for areas requiring the utmost 



Standard waste is a 2” Removable P-Trap. 


20" (51cm) x 21" (53cm) x 30" (76cm) 


16" (41cm) x 19" (48cm) x 10" (25cm) 



Installation: 









and has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal 





1 Sink Spout 


3 2" Removable P-Trap 

4 

Removable Access Door (specify left or right) 

154 0311


16" 

(40cm) 

18" 

(46cm) 

0311 

12" 

(30cm) 

28" 

(71cm) 

HDFSS1821-RM-SV shown 

21" (53cm) 

1 

19" (48cm) 

3" 

(8cm) 

2 

10" 

(25cm) 

4 

3 

HDFSS1821-RM- - 

Heavy Duty Floor Service Sink 


This Heavy Duty Floor Service Sink is designed for areas requiring the 



satin finish. Standard waste is a 2 3/8” OD Plain End Elbow. 


18" (46cm) x 21" (53cm) x 40" (102cm) 


16" (41cm) x 19" (48cm) x 10" (25cm) 



Installation: 











which has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal 




See basin valve options for available configurations. 


1 Sink Spout 


3 2 3/8" OD Plain End Waste 

4 Threaded Mounting Locations (x6) 

155 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


20" 

(51cm) 

12" 

(30cm) 

40" 

(102cm) 

3" (8cm) 

HDFSS2021-FM-SV-RD shown 

1 

21" (53cm) 

2 

28" (71cm) 

4 3 

HDFSS2021-FM- - 

Heavy Duty Floor Service Sink 


This Heavy Duty Floor Service Sink is designed for areas requiring the 



satin finish. Standard waste is a 2” Removable P-Trap. 


20" (51cm) x 21" (53cm) x 40" (102cm) 


16" (41cm) x 19" (48cm) x 10" (25cm) 



Installation: 









and has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal 





1 Sink Spout 


3 Access Panel (specify left or right) 

4 

2" Removable P-Trap 

156 0311


0311 

157 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE

158 


Drinking Fountains

• Vandal resistant seamless welds, and easy to 

clean satin finish. 

• Chrome plated lead free brass bubbler, and 

single temperature air operated metering 

valve with non-hold open feature included. 

• 14 gauge, Type 304 18-10 stainless steel. 

SECTION 18 

159 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SECURITYWARE

Securityware Products - Drinking Fountains 

1" 

(3cm) 

18" 

(46cm) 

4" (10cm) 

1 

HDDF1818-RM 

18" (46cm) 

11" 

(28cm) 

2 

3 

3" 

(7cm) 

HDDF1818-RM 

Heavy Duty Drinking Fountain 


This Heavy Duty Drinking Fountain is designed for areas requiring the 



satin finish. The drinking bubbler is chrome plated lead free brass. 


18" (46cm) x 18" (46cm) x 11" (28cm) 


8 1/2" (22cm) x 14 1/4" (37cm) x 1 1/2" (4cm) 



Installation: 




anchor rods are then secured on the chase side of the wall by supplied 

hardware. (Standard included hardware is for walls up to 8" (20cm) thick). 




The bubbler is controlled with an air-operated self closing valve with a 

non-hold open feature. Flow time is adjustable from approximately 5 to 60 

seconds. The valve is operated by a vandal resistant push button which 

requires less than 5lbs to operate. The valve can be mounted up to 10 feet 

(3meters) away from the push button. Valve conforms to the requirements 

of ASME A112.18.1-2005/CSA B125.1-05. 


1 Deck Mounted Bubbler 


3 

1.5” Waste Outlet 

160 0311

Securityware Products - Drinking Fountains 

0311 

1" 

(3cm) 

18" 

(46cm) 

13" 

(33cm) 

1 

4" (10cm) 

4 

HDDF1818-FM 

18" (46cm) 

2 

5 

9" 

(23cm) 

3 

HDDF1818-FM 

Heavy Duty Drinking Fountain 


This Heavy Duty Drinking Fountain is designed for areas requiring the 



satin finish. The drinking bubbler is chrome plated lead free brass. 


18" (46cm) x 18" (46cm) x 13" (33cm) 


8 1/2" (22cm) x 14 1/2" (37cm) x 1 1/2" (4cm) 



Installation: 







The bubbler is controlled with an air-operated self closing valve with a 

non-hold open feature. Flow time is adjustable from approximately 5 to 60 

seconds. The valve is operated by a vandal resistant push button which 

requires less than 5lbs to operate. The valve can be mounted up to 10 feet 

(3meters) away from the push button. Valve conforms to the requirements 

of ASME A112.18.1-2005/CSA B125.1-05. 


1 Deck Mounted Bubbler 


3 1.5” P Trap 



161 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE

162 


Accessories & Shower Panels

• Rear mounted stainless steel mirrors and 

heavy duty shower panel. Optional metal 

cutout template and wall sleeve for 

poured concrete installation applications. 

• Stainless steel toilet roll holders, waste 

bins, and soap dispensers. 

• Vandal resistant seamless welds, and easy 

to clean satin finish on all accessories 

except mirrors. 

• Shower panel includes integral soap dish 

and air operated single temperature 

(pre-mixed water) metering valve with 

non-hold open feature. 

• 14 gauge, type 304 18-10 stainless steel. 

SECTION 18 

163 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

CUSTOM 

FABRICATION 

SECURITYWARE

Securityware Products - Accessories & Shower Panels 

3" 

(8cm) 

24" 

(61cm) 

HDSP2408-RM 

8" (20cm) 

1 

2 

3 

HDSP2408-RM 

Heavy Duty Shower Panel 


This Heavy Duty Shower Panel is designed for areas requiring the utmost in 

vandal resistance. The fixture is fabricated from heavy 14 gauge type 304 

stainless steel. It is seamlessly welded and polished to a satin finish. 

Shower Panel 

Shower head has a flow rate of 2.4 gpm (9 lpm). Equipped with an air 

operated self closing valve adjustable from approximately 5 to 60 seconds. 


24" (61cm) x 8" (20cm) x 3" (8cm) 

Installation: 









The shower is controlled with an air-operated self closing valve with a non-hold 



than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) away 

from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Shower Spout 

2 Valve Actuator Button 

3 

Soap Dish 

164 0311


0311 

3 1/2" 

[9cm] 

72 3/4" 

[185cm] 

Recommended 

SC1-RM 

7 1/2" [19cm] 

7 1/2" [19cm] 

1 

3 1/2" 

[9cm] 

2 

SC1-RM 

Heavy Duty Shower Components 


This Heavy Duty Shower is designed for areas requiring the utmost in vandal 

resistance. The fixture is fabricated from heavy 14 gauge type 304 stainless 

steel. It is seamlessly welded and polished to a satin finish. 

Shower head has a flow rate of 2.4 gpm (9 lpm). Equipped with an air 

operated self closing valve adjustable from approximately 5 to 60 seconds. 

Installation: 


serviceable from a pipe chase. Installation is achieved by threading 1/2” 

(13mm) diameter anchor rods to the back of the fixture plate. The anchor 

rods are then secured on the chase side of the wall with supplied hardware. 

(Standard included hardware is for walls up to 8" (20cm) thick). 




The shower is controlled with an air-operated self closing valve with a non-hold 



than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) away 

from the push button. Valve conforms to the requirements of ASME 

A112.18.1-2005/CSA B125.1-05. 


1 Shower Spout 

2 Valve Actuator Button 

165 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


16" 

(41cm) 

M1216 

11" 

(28cm) 

12" 

(30cm) 

15" 

(38cm) 

12" x 16" Rear Mounted 

M1216 

Heavy Duty Mirror 


This Heavy Duty Rear Mounted Mirror is designed for installation into high 

security institutions. It is seamlessly welded 14 gauge, 18-10 type 304 

stainless steel. 

Installation: 

Installation is achieved via (4) 3/8" threaded rods secured from within the 

pipe chase. Included hardware is for walls up to 8" thick. 

APPROVED FOR MANUFACTURE 

Customer: 

Name and Title (print): 

Signature: 

The latest rough in information is supplied with each fixture. Do not rough in without first verifying 

dimensions. Franke Kindred Canada reserves the right to make design and specification changes without 

prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please 

visit www.kindred-commercial.com for the latest specifications. 

166 0311 

Date: 

Quantity: 

Model:


0311 

24" 

(61cm) 

M1224 

11" (28cm) 

12" (31cm) 

10 1/2" 

(27cm) 

10 1/2" 

(27cm) 

1 1/2" 

(4cm) 


M1224 






Installation: 




Customer: 


Signature: 

Date: 

Quantity: 

Model: 





167 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


40" 

(102cm) 

M2440 

22" (56cm) 

24" (61cm) 


18 1/2" 

(47cm) 

1 1/2" 

(4cm) 

37" 

(94cm) 

M2440 






Installation: 




Customer: 


Signature: 





168 0311 

Date: 

Quantity: 

Model:


0311 

9 7/16" 

[24cm] 

1 5/8" 

[4cm] 

9 7/16" [24cm] 

RH320 

12 11/16" 

[32cm] 

12 9/16" [32cm] 5 1/8" 

[13cm] 

RH320 

Heavy Duty Jumbo Roll Toilet Paper Dispenser 

Specification: 

This Heavy Duty Jumbo Roll Toilet Paper Dispenser is designed for 

installation into high security institutions. Fabricated from 14 gauge 18-10 

type 304 stainless steel. Keyed access is required to refill this unit. Casing 

is held in place by a stainless steel rod fixed to the mounting plate and 

security lock. Paper withdrawal over two tear-off edges, for one roll with 

maximum Ø 300 mm. 

Installation is achieved by mounting this unit to a wall using supplied 

hardware. 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





169 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


13 3/4" 

(35cm) 

1 9/16" 

(4cm) 

3 1/8" 

(8cm) 

5 1/8" 

(13cm) 

HDTX674 

16 5/16" 

(41cm) 

5 7/8" 

(15cm) 

HDTX674 

Heavy Duty Triple Toilet Roll Dispenser 


This Heavy Duty Triple Toilet Roll Dispenser is designed for installation into 

high security institutions. It is seamlessly welded 14 gauge 18-10 type 304 

stainless steel. Keyed access is required to open this unit to refill standard 

toilet paper rolls. 


hardware. 


Customer: 


Signature: 





170 0311 

Date: 

Quantity: 

Model:


0311 

9/16" 

(1cm) 

9/16" 

(1cm) 

3 1/8" 

(8cm) 

9/16" 

(1cm) 

4 5/16" 

(11cm) 

5 1/2" 

(14cm) 

RH140HD 

9/16" 

(1cm) 

4 5/16" 

(11cm) 

4 5/16" 

(11cm) 

RH140HD 

Heavy Duty Toilet Paper Dispenser 


This Heavy Duty Toilet Roll Dispenser is designed for installation into high 

security institutions. It is seamlessly welded 14 gauge 18-10 type 304 

stainless steel. Keyed access is required to refill this unit. 


hardware . 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





171 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


1 3/16" 

[3cm] 

11 11/16" 

[30cm] 

8 5/8" [22cm] 

10 3/16" [26cm] 

TD350 

3/4" [2cm] 

13 7/8" 

[35cm] 

5" [13cm] 

TD350 

Heavy Duty Paper Towel Dispenser 


This Heavy Duty Paper Towel Dispenser is designed for installation into high 

security institutions. Fabricated from 14 gauge, 18-10 type 304 stainless 

steel. For use with center feed paper towels. 


hardware (stainless steel screws and dowels). 


Customer: 


Signature: 





172 0311 

Date: 

Quantity: 

Model:


0311 

14 9/16" 

(37cm) 

2 3/8" 

(6cm) 

14 9/16" (37cm) 

16 1/8" (41cm) 

GB445 

17 11/16" 

(45cm) 

8 7/8" 

(23cm) 

GB445 

Heavy Duty Waste Bin 


This Heavy Duty Waste Bin is designed for installation into high security 

institutions. It is seamlessly welded 14 gauge 18-10 type 304 stainless steel. 

Keyed access is required to open this unit to remove waste bag. 


hardware. 


Customer: 


Signature: 

Date: 

Quantity: 

Model: 





173 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE


10 11/16" 

[27cm] 

1 1/8" 

[3cm] 

3 11/16" 

[9cm] 

5" [13cm] 

SD300 

12 9/16" 

[32cm] 

5 1/16" 

[13cm] 

SD300 

Heavy Duty Soap Dispenser 


This Heavy Duty Soap Dispenser is designed for installation into high 

security institutions. Fabricated from 14 gauge 18-10 type 304 stainless 

steel. The dispenser is compatible with standard liquid soaps. Keyed access 

is required to refill this unit. 


hardware. 


Customer: 


Signature: 





174 0311 

Date: 

Quantity: 

Model:

0311 

175 

GENERAL 

INFORMATION 


DROP-IN SINKS 

CLASSROOM 

SINKS 


DROP-IN SINKS 


DROP-IN SINKS 

UNDERMOUNT 

SINKS 

VANITY 

BASINS 

DRAINBOARD 

SINKS 

SECURITYWARE

Quick Find Guide 

MODEL PAGE MODEL PAGE MODEL PAGE 

100-NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

1130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

1200/316G . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

125GWK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

125GOWK . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

1300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

200/316G . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

310-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

312-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

315-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

315-9/316 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

315-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

C621. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 

AHDSB1918-FM . . . . . . . . . . . . . . . . 149 

AHDSB1918-RM . . . . . . . . . . . . . . . . 148 

ALBD1305P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD1306P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD4405P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD4406P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD6405-1 . . . . . . . . . . . . . . . . . . . . 27 

ALBD6405P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD6406P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD7505P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBD7506P-1 . . . . . . . . . . . . . . . . . . . 28 

ALBLRS7005P-1 . . . . . . . . . . . . . . . . . 19 

ALBLRS7006P-1 . . . . . . . . . . . . . . . . . 19 

ALBLS4605P-1 . . . . . . . . . . . . . . . . . . 18 

ALBLS4606P-1 . . . . . . . . . . . . . . . . . . 18 

ALBLS6406P-1 . . . . . . . . . . . . . . . . . . 18 

ALBLS7005P-1 . . . . . . . . . . . . . . . . . . 18 

ALBLS7006P-1 . . . . . . . . . . . . . . . . . . 18 

ALBRS4605P-1 . . . . . . . . . . . . . . . . . . 19 

ALBRS4606P-1 . . . . . . . . . . . . . . . . . . 19 

ALBRS7005P-1 . . . . . . . . . . . . . . . . . . 19 

ALBRS7006P-1 . . . . . . . . . . . . . . . . . . 19 

ALBS1305P-1 . . . . . . . . . . . . . . . . . . . . 13 

ALBS1306P-1 . . . . . . . . . . . . . . . . . . . . 13 

ALBS2705P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS2706P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS4005P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS4006P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS4405P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS4406P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS4605P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS4606P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS6105P-1 . . . . . . . . . . . . . . . . . . . . 14 

ALBS6106P-1 . . . . . . . . . . . . . . . . . . . . 14 

ALBS6405-1 . . . . . . . . . . . . . . . . . . . . 12 

ALBS6405P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS6406P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS6805/316-1 . . . . . . . . . . . . . . . 107 

ALBS6805-1 . . . . . . . . . . . . . . . . . . . . 12 

ALBS6805P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS6806P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7005P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7006P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7305P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7306P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7505P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7506P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7805P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS7806P-1 . . . . . . . . . . . . . . . . . . . 14 

ALBS9405P-1 . . . . . . . . . . . . . . . . . . . 13 

ALBS9406P-1 . . . . . . . . . . . . . . . . . . . 13 

ALHS4605P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS4606P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS6405P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS6406P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS7305P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS7306P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS8605P-1 . . . . . . . . . . . . . . . . . . . 20 

ALHS8606P-1 . . . . . . . . . . . . . . . . . . . 20 

ALRS4605P-1 . . . . . . . . . . . . . . . . . . . 20 

ALRS4606P-1 . . . . . . . . . . . . . . . . . . . 20 

ART36/316-1. . . . . . . . . . . . . . . . . . . . . . . 115 

ART36/316-3C . . . . . . . . . . . . . . . . . . . . . 115 

ART36-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

ART36-3C . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

ART48/316-1. . . . . . . . . . . . . . . . . . . . . . . 116 

ART48/316-3C . . . . . . . . . . . . . . . . . . . . . 116 

ART48-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

ART48-3C . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

ART60/316-1. . . . . . . . . . . . . . . . . . . . . . . 116 

ART60/316-3C . . . . . . . . . . . . . . . . . . . . . 116 

ART60-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

ART60-3C . . . . . . . . . . . . . . . . . . . . . . . . . . 22 

AS6105P-1 . . . . . . . . . . . . . . . . . . . . . . 11 

AWHB1414P-00 . . . . . . . . . . . . . . . . . 77 

BCS6713 . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 

CMPX150 . . . . . . . . . . . . . . . . . . . . . . . . . . 82 

CMPX538 . . . . . . . . . . . . . . . . . . . . . . . . . 122 

CMPX538WF. . . . . . . . . . . . . . . . . . . . . . . 122 

CMPX538RD . . . . . . . . . . . . . . . . . . . . . . . 122 

D0814P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 

D1906-1 . . . . . . . . . . . . . . . . . . . . . . . 26 

D6408-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 

D6410/316P-1 . . . . . . . . . . . . . . . . . . . . . . 111 

D6410/316P-3 . . . . . . . . . . . . . . . . . . . . . . 111 

D6410PCB-1 . . . . . . . . . . . . . . . . . . . . . . . . 26 

D8610-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 

DB01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

DB02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

DL2448-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

DL2448-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

FSS2210/316-1. . . . . . . . . . . . . . . . . . . . . . 90 

FSS222210/316-1 . . . . . . . . . . . . . . . . . . . 88 

FSSL223410/316-1 . . . . . . . . . . . . . . . . . . 89 

FSSO2210/316-1 . . . . . . . . . . . . . . . . . . . . 91 

FSSOL223410/316-1 . . . . . . . . . . . . . . . . . 88 

FSSOR223410/316-1. . . . . . . . . . . . . . . . . 89 

FSSR223410/316-1 . . . . . . . . . . . . . . . . . . 90 

FWHB1819-3. . . . . . . . . . . . . . . . . . . . . . . . 80 

GB445 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 

H6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 

HB6000. . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 

HDCU1318. . . . . . . . . . . . . . . . . . . . . . . . . 140 

HDDF1818-FM. . . . . . . . . . . . . . . . . . . . . . 158 

HDDF1818-RM . . . . . . . . . . . . . . . . . . . . . 158 

HDFSS1821-RM . . . . . . . . . . . . . . . . . . . . 153 

HDFSS2021-FM . . . . . . . . . . . . . . . . . . . . 154 

HDPWB1518 . . . . . . . . . . . . . . . . . . . . . . . 150 

HDSB1318-RM. . . . . . . . . . . . . . . . . . . . . . 146 

HDSB1418-FM. . . . . . . . . . . . . . . . . . . . . . 147 

HDSP2408-RM . . . . . . . . . . . . . . . . . . . . . 162 

HDTX674. . . . . . . . . . . . . . . . . . . . . . . . . . 168 

HDU1314-RM . . . . . . . . . . . . . . . . . . . . . . 142 

HDWC2414-RM. . . . . . . . . . . . . . . . . . . . . 141 

HDWSS1821 . . . . . . . . . . . . . . . . . . . . . . . 151 

HDWSS2021-FM. . . . . . . . . . . . . . . . . . . . 152 

HWS1414P-00. . . . . . . . . . . . . . . . . . . . . . . 77 

HWS1420P-00 . . . . . . . . . . . . . . . . . . . . . . 78 

LBD0814P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD1308P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD4408P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD4410P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD6407/316-1 . . . . . . . . . . . . . . . . . . . . 111 

LBD6407-1 . . . . . . . . . . . . . . . . . . . . . . . . . 27 

LBD6408/316-1 . . . . . . . . . . . . . . . . . . . . 112 

LBD6408-1 . . . . . . . . . . . . . . . . . . . . . . . . . 27 

LBD6408P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD6410/316PCB-1 . . . . . . . . . . . . . . . . . 112 

LBD6410/316PCB-3 . . . . . . . . . . . . . . . . . 112 

LBD6410PCB-1. . . . . . . . . . . . . . . . . . . . . . 28 

LBD6808-1 . . . . . . . . . . . . . . . . . . . . . . . . . 27 

LBD7412P-1. . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD7412P-2. . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD7508-1 . . . . . . . . . . . . . . . . . . . . . . . . . 27 

LBD7508P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBD7510P-1 . . . . . . . . . . . . . . . . . . . . . . . . 28 

LBDDBL6408P-1 . . . . . . . . . . . . . . . . . . . . 49 

LBDDBR6408P-1 . . . . . . . . . . . . . . . . . . . . 49 

LBLDC1737P-1 . . . . . . . . . . . . . . . . . . 21 

LBLDC1943P-1 . . . . . . . . . . . . . . . . . . 21 

LBLRS7008P-1 . . . . . . . . . . . . . . . . . . . . . . 19 

LBLS4608P-1. . . . . . . . . . . . . . . . . . . . . . . . 18 

LBLS6408P-1. . . . . . . . . . . . . . . . . . . . . . . . 18 

LBLS7008P-1. . . . . . . . . . . . . . . . . . . . . . . . 18 

LBRDC1737P-1 . . . . . . . . . . . . . . . . . . 21 

176 0311



LBRDC1943P-1 . . . . . . . . . . . . . . . . . . 21 

LBRS4608P-1 . . . . . . . . . . . . . . . . . . . . . . . 19 

LBRS7008P-1 . . . . . . . . . . . . . . . . . . . . . . . 19 

LBS1306-1 . . . . . . . . . . . . . . . . . . . . . . 12 

LBS1308P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBS2708-1. . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS2708P-1. . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBS4008P-1 . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS4010P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS4408P-1. . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBS4410P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBS4607/316-1 . . . . . . . . . . . . . . . . . . . . 105 

LBS4607/316-3 . . . . . . . . . . . . . . . . . . . . 105 

LBS4607-1. . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS4608P-1. . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBS4610/316P-1. . . . . . . . . . . . . . . . . . . . 106 

LBS4610/316PC-3 . . . . . . . . . . . . . . . . . . 106 

LBS4610P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6108P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6110P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6407/316-1 . . . . . . . . . . . . . . . . . . . . 106 

LBS6407/316-3 . . . . . . . . . . . . . . . . . . . . 106 

LBS6408P-1. . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6410PCB-1 . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6807/316-1 . . . . . . . . . . . . . . . . . . . . 107 

LBS6807-1 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS6807-2 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS6808/316-1 . . . . . . . . . . . . . . . . . . . . 108 

LBS6808-1 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS6808-2 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS6808P-1 . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS6810/316-1 . . . . . . . . . . . . . . . . . . . . 108 

LBS6810/316-3 . . . . . . . . . . . . . . . . . . . . 108 

LBS6810-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS6810P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7008P-1 . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7010P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7308-1 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS7308P-1. . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7310P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7312P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7312P-2 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7314P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7508-1. . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS7508P-1. . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7510P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS7808P-1. . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS8014P-1 . . . . . . . . . . . . . . . . . . . . . . . . . 14 

LBS9106-1 . . . . . . . . . . . . . . . . . . . . . . 12 

LBS9106-3 . . . . . . . . . . . . . . . . . . . . . . 12 

LBS9407/316-1 . . . . . . . . . . . . . . . . . . . . 105 

LBS9407/316-3 . . . . . . . . . . . . . . . . . . . . 105 

0311 

LBS9407-1 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS9407-3 . . . . . . . . . . . . . . . . . . . . . . . . . 12 

LBS9408P-1. . . . . . . . . . . . . . . . . . . . . . . . . 13 

LBSDBL6408P-1. . . . . . . . . . . . . . . . . . . . . 48 

LBSDBR6408P-1 . . . . . . . . . . . . . . . . . . . . 48 

LBSDBL6810/316-1 . . . . . . . . . . . . . . . . . 118 

LBSDBL6810/316-3 . . . . . . . . . . . . . . . . . 118 

LBSDBL6810P-1 . . . . . . . . . . . . . . . . . . . . . 48 

LBSDBR6810P-1 . . . . . . . . . . . . . . . . . . . . . 48 

LBSDBR6810/316-1 . . . . . . . . . . . . . . . . . 118 

LBSDBR6810/316-3 . . . . . . . . . . . . . . . . . 118 

LBT6407CB-1. . . . . . . . . . . . . . . . . . . . . . . 33 

LBT6410PCB-1 . . . . . . . . . . . . . . . . . . . . . . 33 

LBT8607-1 . . . . . . . . . . . . . . . . . . . . . . . . . 34 

LBT8610P-1. . . . . . . . . . . . . . . . . . . . . . . . . 34 

LHS4608P-1 . . . . . . . . . . . . . . . . . . . . . . . . 20 

LHS6408P-1 . . . . . . . . . . . . . . . . . . . . . . . . 20 

LHS7308P-1 . . . . . . . . . . . . . . . . . . . . . . . . 20 

LHS8608P-1 . . . . . . . . . . . . . . . . . . . . . . . . 20 

LRS4608P-1 . . . . . . . . . . . . . . . . . . . . . . . . 20 

M1216. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 

M1224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 

M2440 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 

NSFWHB1616P-00 . . . . . . . . . . . . . . . 82 

OC6/316 . . . . . . . . . . . . . . . . . . . . . . . . . . 113 

OF100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

OF100-VAN . . . . . . . . . . . . . . . . . . . . . . . . . . 7 

OV1418/6 . . . . . . . . . . . . . . . . . . . . . . 42 

OV1619/5 . . . . . . . . . . . . . . . . . . . . . . 44 

OV1619/6 . . . . . . . . . . . . . . . . . . . . . . 44 

OV17/5 . . . . . . . . . . . . . . . . . . . . . . . . 43 

OV17/6 . . . . . . . . . . . . . . . . . . . . . . . . 43 

OV18SR/6 . . . . . . . . . . . . . . . . . . . . . . 45 

OV18SR/7 . . . . . . . . . . . . . . . . . . . . . . . . . . 45 

OV1821/5 . . . . . . . . . . . . . . . . . . . . . . 44 

OV1821/6 . . . . . . . . . . . . . . . . . . . . . . 44 

OV19/5 . . . . . . . . . . . . . . . . . . . . . . . . 43 

OV19/6 . . . . . . . . . . . . . . . . . . . . . . . . 43 

RC5/316 . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 

RC6/316 . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 

RDL2436-1 . . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436-5 . . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436L-1 . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436L-5 . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436LR-1 . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436LR-5 . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436R-1 . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2436R-5 . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2448-1 . . . . . . . . . . . . . . . . . . . . . . . . . 57 

RDL2448LR-1 . . . . . . . . . . . . . . . . . . . . . . . 57 

RH140HD. . . . . . . . . . . . . . . . . . . . . . . . . . 169 

RH320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 

RS14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 

RSL2418-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418L-1 . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418L-5 . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418LR-1 . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418LR-5 . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418R-1 . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2418R-5 . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2424-1. . . . . . . . . . . . . . . . . . . . . . . . . . 56 

RSL2424LR-1. . . . . . . . . . . . . . . . . . . . . . . . 56 

RTL2454-1 . . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454-5 . . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454L-1. . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454L-5. . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454LR-1 . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454LR-5 . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454R-1 . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2454R-5 . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2472-1 . . . . . . . . . . . . . . . . . . . . . . . . . 58 

RTL2472LR-1 . . . . . . . . . . . . . . . . . . . . . . . 56 

S2214P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S4206-1 . . . . . . . . . . . . . . . . . . . . . . . . 10 

S6108P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S6407/316-1 . . . . . . . . . . . . . . . . . . . . . . 103 

S6407/316-3 . . . . . . . . . . . . . . . . . . . . . . 103 

S6408-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

S6410/316PCB-1 . . . . . . . . . . . . . . . . . . . 103 

S6410/316P-3. . . . . . . . . . . . . . . . . . . . . . 103 

S6410PCB-1 . . . . . . . . . . . . . . . . . . . . . . . . 11 

S6808/316-1 . . . . . . . . . . . . . . . . . . . . . . 104 

S6808-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

S6810/316-1. . . . . . . . . . . . . . . . . . . . . . . 104 

S6810/316-3. . . . . . . . . . . . . . . . . . . . . . . 104 

S6810-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

S7308-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

S7310P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S7312P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S7312P-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S7314P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S8014P-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 

S9106/316-1 . . . . . . . . . . . . . . . . . . . 102 

S9106/316-3 . . . . . . . . . . . . . . . . . . . 102 

S9106-1 . . . . . . . . . . . . . . . . . . . . . . . . 10 

S9106-3 . . . . . . . . . . . . . . . . . . . . . . . . 10 

S9407/316-1 . . . . . . . . . . . . . . . . . . . . . . 102 

S9407/316-3 . . . . . . . . . . . . . . . . . . . . . . 102 

S9407-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 

SC1-RM . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 

SD300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 

SDL2430-1 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2430-5 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2436-1 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2436-5 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

177



SDL2442-1 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2442-5 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2442LR-1 . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2442LR-5 . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2448-1 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2448-5 . . . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2448LR-1 . . . . . . . . . . . . . . . . . . . . . . . 54 

SDL2448LR-5 . . . . . . . . . . . . . . . . . . . . . . . 54 

SL2424/316-1 . . . . . . . . . . . . . . . . . . . . . . 114 

SL2424/316-5 . . . . . . . . . . . . . . . . . . . . . . 114 

SL2424-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

SL2424-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

SL2448/316-1 . . . . . . . . . . . . . . . . . . . . . . 115 

SL2448/316-5 . . . . . . . . . . . . . . . . . . . . . . 115 

SL2448-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

SL2448-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

SS9126. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 

SSL2424-1. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424-5. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424L-1 . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424L-5 . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424LR-1. . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424LR-5. . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424R-1. . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2424R-5. . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2430-1. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2430-5. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2436-1. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSL2436-5. . . . . . . . . . . . . . . . . . . . . . . . . . 53 

SSS1827. . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 

SSS1827DDS. . . . . . . . . . . . . . . . . . . . . . . . 95 

SSS1827SDSL . . . . . . . . . . . . . . . . . . . . . . . 94 

SSS1827SDSR. . . . . . . . . . . . . . . . . . . . . . . 94 

SSU1-2016-00 . . . . . . . . . . . . . . . . . . . . . . 64 

SSU1-2020-00 . . . . . . . . . . . . . . . . . . . . . 65 

SSU2-2040-00 . . . . . . . . . . . . . . . . . . . . . 66 

SSU1-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 

SSU1-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 

SSU1-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 

SSU1-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 

SSU2-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

SSU2-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

SSU2-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

SSU2-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 

SSU3-00 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 

SSU3-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 

SSU3-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 

SSU3-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 

STL2445-1 . . . . . . . . . . . . . . . . . . . . . . . . . 55 

STL2445-5 . . . . . . . . . . . . . . . . . . . . . . . . . 55 

STL2454-1 . . . . . . . . . . . . . . . . . . . . . . . . . 55 

STL2454-5 . . . . . . . . . . . . . . . . . . . . . . . . . 55 

STL2472-1. . . . . . . . . . . . . . . . . . . . . . . . . . 55 

STL2472-5. . . . . . . . . . . . . . . . . . . . . . . . . . 55 

T302. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

T316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 

T6410PCB-1 . . . . . . . . . . . . . . . . . . . . . . . . 32 

T8610-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 

TD350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 

TL2454-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

TL2454-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

TL2472-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

TL2472-5. . . . . . . . . . . . . . . . . . . . . . . . . . . 52 

TMV570. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 

UCD6405P-1 . . . . . . . . . . . . . . . . . . . 39 

UCD6408P-1 . . . . . . . . . . . . . . . . . . . . . . . 39 

UCS4608/316P-1 . . . . . . . . . . . . . . . . . . 109 

UCS4610/316P-1 . . . . . . . . . . . . . . . . . . . 109 

UCS6805P-1 . . . . . . . . . . . . . . . . . . . . 38 

UCS6808/316P-1 . . . . . . . . . . . . . . . . . . . 110 

UCS6808P-1. . . . . . . . . . . . . . . . . . . . . . . . 38 

UCS6810/316P-1 . . . . . . . . . . . . . . . . . . . 114 

V1114/5 . . . . . . . . . . . . . . . . . . . . . . . . 42 

V1114/5D . . . . . . . . . . . . . . . . . . . . . . . 42 

V1418/5 . . . . . . . . . . . . . . . . . . . . . . . . 42 

V1418/5D . . . . . . . . . . . . . . . . . . . . . . 42 

V1418/6 . . . . . . . . . . . . . . . . . . . . . . . . 42 

V1619/5 . . . . . . . . . . . . . . . . . . . . . . . . 44 

V1619/6 . . . . . . . . . . . . . . . . . . . . . . . . 44 

V17/5 . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

V17/6 . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

V1821/5 . . . . . . . . . . . . . . . . . . . . . . . 44 

V1821/6 . . . . . . . . . . . . . . . . . . . . . . . 44 

V19/5 . . . . . . . . . . . . . . . . . . . . . . . . . . 43 

V19/5D . . . . . . . . . . . . . . . . . . . . . . . . 44 

V19/6 . . . . . . . . . . . . . . . . . . . . . . . . . . 44 

WDL2448-1 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448-5 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448L-1. . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448L-5. . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448LR-1 . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448LR-5 . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448R-1 . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2448R-5 . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2460-1 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2460-5 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2472-1 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WDL2472-5 . . . . . . . . . . . . . . . . . . . . . . . . 60 

WHB1616P-3 . . . . . . . . . . . . . . . . . . . . . . . . 78 

WHB1617/316-3 . . . . . . . . . . . . . . . . . . . . 117 

WHB1617-3 . . . . . . . . . . . . . . . . . . . . . 79 

WHB1617-6 . . . . . . . . . . . . . . . . . . . . . 79 

WHB1617-7 . . . . . . . . . . . . . . . . . . . . . 79 

WHB1819/316-3 . . . . . . . . . . . . . . . . . . . . 117 

WHB1819-3. . . . . . . . . . . . . . . . . . . . . . . . . 79 

WHB1819-6. . . . . . . . . . . . . . . . . . . . . . . . . 79 

WHB1819-7. . . . . . . . . . . . . . . . . . . . . . . . . 79 

WSL2424-1 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424-5 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424L-1 . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424L-5 . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424LR-1 . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424LR-5 . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424R-1 . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2424R-5 . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2430-1 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2430-5 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2436-1 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSL2436-5 . . . . . . . . . . . . . . . . . . . . . . . . . 59 

WSS6713 . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 

WT-RS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 

WT310E-7 . . . . . . . . . . . . . . . . . . . . . . . . . . 82 

WT400C-7 . . . . . . . . . . . . . . . . . . . . . . . . . 80 

WT400C-8 . . . . . . . . . . . . . . . . . . . . . . . . . 80 

WT500C-7 . . . . . . . . . . . . . . . . . . . . . . . . . 81 

WT500C-8 . . . . . . . . . . . . . . . . . . . . . . . . . 81 

WT600C-7 . . . . . . . . . . . . . . . . . . . . . . . . 81 

WT600C-8 . . . . . . . . . . . . . . . . . . . . . . . . 81 

WTL2445-1. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2445-5. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2454-1. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2454-5. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472-1. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472-5. . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472L-1 . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472L-5 . . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472LR-1. . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472LR-5. . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472R-1. . . . . . . . . . . . . . . . . . . . . . . . 61 

WTL2472R-5. . . . . . . . . . . . . . . . . . . . . . . . 61 

WTS2025-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2031-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2036-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2048-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2060-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2072-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS2096-1 . . . . . . . . . . . . . . . . . . . . . . . . 85 

WTS36-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 

WTS48-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 

WTS60-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 

WTS72-1. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 

XINH201 . . . . . . . . . . . . . . . . . . . . . . . 76 

XINX201 . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 

178 0311

Untitled - Franke

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?