Untitled - Franke

Single Compartment Drop-in Sinks With faucet ledge 20 Gauge
A
C
E
LBS2708-1 SHOWN
D
B
SPECIFICATION:
Single compartment sink with faucet ledge. 20 gauge, type 302, 18-8
stainless steel. Self-rimming. Exposed surfaces are satin finished.
Undercoated to reduce condensation and resonance. Complete with
factory applied rim seal, Universal Installation System hardware, cutout
template and waste assembly.
WASTE SIZE: (Indicated in model number, eg. LBS9106-1)
-1 = 3 1/2" (89mm) crumb cup waste assembly
-2 = 3 1/2" (89mm) crumb cup waste assembly
with integral overflow kit
-3 = 1 1/2" (38mm) duplex waste assembly
WASTE LOCATION:
C = center
CB = center back
LR = left rear
FAUCET HOLE OPTIONS (STANDARD):
When ordering a model number, indicate which faucet hole option is
required by adding the following to the end of the model number; (eg.
LBS9106-1/2)
/1 = 1 hole, 1 1/2" diameter, centered over waste
/2 = 2 hole, 4" centerset, 1 1/2" diameter, centered over waste
/3 = 3 hole, 8" centerset, 1 1/2" diameter, centered over waste
/4 = 4 hole, as 3 hole above, plus 1 hole 4" to the right
CUSTOM FAUCET HOLES:
Custom faucet hole drillings are available on all models. Order model
as indicated in chart below, specifying all necessary hole drilling
information. Sinks with custom drillings are non-returnable.
NOTES:
• Electronic specifications, reference www.kindred-commercial.com
• Model numbers beginning with A signify product meets ADA
compliance. The model as constructed is subject to the interpretation
of local building codes. Check ADA, local wheelchair accessibility
guidelines and local building codes to ensure the unobstructed knee
space is achieved after installation.
• For more information on faucet hole options, reference chart on
page 29.
• T316 equivalents available for some models. Please see Section 15.
OVERALL DIMENSIONS SINK COMPARTMENT DIMENSIONS
CAN A B C D E WASTE FAUCET HOLE
ADA MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) LOCATION OPTIONS
• LBS9106-1 13 3/4" (35cm) 13 5/8" (35cm) 9 1/4" (23cm) 11 5/8" (30cm) 6" (15cm) C 1, 2
• LBS9106-3 13 3/4" (35cm) 13 5/8" (35cm) 9 1/4" (23cm) 11 5/8" (30cm) 6" (15cm) C 1, 2
• LBS1306-1 15 7/16" (39cm) 15 1/8" (38cm) 11" (28cm) 13" (33cm) 6" (15cm) C 1, 2
LBS9407-1 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 7" (18cm) C 1, 2
LBS9407-3 14 5/16" (36cm) 16 5/8" (42cm) 9 1/2" (24cm) 14 1/2" (37cm) 7" (18cm) C 1, 2
LBS2708-1 17" (43cm) 19 1/8" (49cm) 12" (30cm) 17" (43cm) 8" (20cm) C 1, 3
LBS4607-1 18 13/16" (47cm) 18 1/8" (46cm) 14" (36cm) 16" (41cm) 7" (18cm) C 1, 3
• • ALBS6405-1 20 9/16" (52cm) 16 1/8" (41cm) 16" (41cm) 14" (36cm) 5" (13cm) CB 1, 3
• • ALBS6805-1 20 9/16" (52cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 5" (13cm) LR 1, 3
LBS6807-1 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 7" (18cm) CB 1, 3
LBS6807-2 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 7" (18cm) CB 1, 3
LBS6808-1 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 8" (20cm) CB 1, 3
LBS6808-2 20 1/2" (52cm) 20" (51cm) 16" (41cm) 18" (46cm) 8" (20cm) CB 1, 3
LBS6810-1 20 9/16" (52cm) 20 1/8" (51cm) 16" (41cm) 18" (46cm) 10" (25cm) C 1, 3
LBS7508-1 22" (56cm) 17 1/4" (44cm) 17" (43cm) 15" (38cm) 8" (20cm) CB 1, 3
LBS7308-1 22" (56cm) 25 1/4" (64cm) 17" (43cm) 23" (58cm) 8" (20cm) CB 1, 3, 4
12 0311