Untitled - Franke
Untitled - Franke
Untitled - Franke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wash Basins & Trough Sinks Clinical Hand Wash Basins<br />
18 1/2”<br />
[47 cm]<br />
0311<br />
14 1/4” [36 cm]<br />
3” [8 cm]<br />
14 1/2”<br />
[37 cm]<br />
15” [38 cm]<br />
4 1/2”<br />
[11 cm]<br />
14”<br />
[36 cm]<br />
3 1/4”<br />
[8 cm]<br />
Integrally welded 1.5"<br />
tailpiece<br />
6”<br />
[15 cm]<br />
14” [36 cm]<br />
18 1/2”<br />
[47 cm]<br />
10”<br />
[25 cm]<br />
17 1/2” [45 cm]<br />
18 3/4” [48 cm]<br />
3”<br />
[8 cm]<br />
9” [23 cm]<br />
AWHB1414P-00<br />
SPECIFICATION:<br />
18 gauge, type 304, 18-10 stainless steel. Polished satin finish. Radius<br />
coved bowl corners. Integral 1 1/2" waste welded to bottom of the sink<br />
bowl. Waste is left open to allow for easy cleaning of P-Trap. Waste<br />
location left rear. Saniguard ® product protection on all exposed surfaces<br />
of sink.<br />
COMPARTMENT SIZE: 14" x 14" x 9" (35cm x 35cm x 23cm)<br />
OVERALL SIZE: 17 1/4" x 14 3/16" (44cm x 36cm)<br />
BACKSPLASH: 6" (15cm)<br />
WASTE: Integrally welded stainless steel tailpiece 1 1/2"<br />
FAUCET HOLE DRILLING OPTIONS: Please specify<br />
NOTES:<br />
• Separate sink carrier is not required<br />
• To learn more about Saniguard ® product protection, see page 76<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
HWS1414P-00<br />
SPECIFICATION:<br />
18 gauge, type 304, 18-10 stainless steel medical hand wash basin.<br />
Polished to a #4 satin finish. Fixture bowl is constructed with radius<br />
coved corners. Integral side splashes help prevent splashing and<br />
contamination of nearby surfaces. Waste location is left corner back and<br />
includes integral tailpiece. Wall hangers included. Saniguard ® product<br />
protection on all exposed surfaces of sink.<br />
COMPARTMENT SIZE: 14" x 14" x 10" (35cm x 35cm x 25cm)<br />
OVERALL SIZE: 18 3/4" x 15" x 18 1/2" (48cm x 38cm x 47cm)<br />
BACKSPLASH: 8" (20cm)<br />
WASTE: Integrally welded stainless steel tailpiece 1 1/2"<br />
FAUCET HOLE DRILLING OPTIONS: Please specify<br />
NOTES:<br />
• Separate sink carrier is not required<br />
• To learn more about Saniguard ® product protection, see page 76<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
79<br />
GENERAL<br />
INFORMATION<br />
WASH BASINS &<br />
TROUGH SINKS<br />
CLASSROOM<br />
SINKS<br />
DOUBLE COMPARTMENT<br />
DROP-IN SINKS<br />
TRIPLE COMPARTMENT<br />
DROP-IN SINKS<br />
UNDERMOUNT<br />
SINKS<br />
VANITY<br />
BASINS<br />
DRAINBOARD<br />
SINKS<br />
SCULLERY<br />
SINKS