Untitled - Franke
Untitled - Franke
Untitled - Franke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Type 316 Laboratory Sinks<br />
20 1/2˝ [52cm]<br />
16˝ [41cm]<br />
8˝ [20cm]<br />
20 9/16" [52cm]<br />
16" [41cm]<br />
10" [25cm]<br />
18˝ [46cm]<br />
20˝ [51cm]<br />
18" [46cm]<br />
20 1/8" [51cm]<br />
11 3/4˝<br />
[30cm]<br />
10˝<br />
[25cm]<br />
9 1/16"<br />
[23cm]<br />
10 1/16"<br />
[26cm]<br />
LBS6808/316-1<br />
SPECIFICATION:<br />
Single compartment sink with faucet ledge. 20 gauge, type 316,<br />
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.<br />
Undercoated to reduce condensation and resonance. Includes factory<br />
applied rim seal, Universal Installation System hardware and<br />
3 1/2" (89mm) crumb cup waste assembly, location center back.<br />
COMPARTMENT SIZE: 16" x 18" x 8" (41cm x 46cm x 20cm)<br />
OVERALL SIZE: 20 1/2" x 20" (52cm x 51cm)<br />
FAUCET HOLE DRILLING OPTIONS:<br />
❑ LBS6808/316-1/1 1 hole, 1 1/2" diameter<br />
❑ LBS6808/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS6808/316-1 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
LBS6810/316-<br />
SPECIFICATION:<br />
Single compartment sink with faucet ledge. 20 gauge, type 316,<br />
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.<br />
Undercoated to reduce condensation and resonance. Includes factory<br />
applied rim seal, Universal Installation System hardware and waste<br />
assembly, location center.<br />
COMPARTMENT SIZE: 16" x 18" x 10" (41cm x 46cm x 25cm)<br />
OVERALL SIZE: 20 9/16" x 20 1/8" (52cm x 51cm)<br />
WASTE & FAUCET HOLE DRILLING OPTIONS:<br />
3 1/2" (89mm) crumb cup waste assembly<br />
❑ LBS6810/316-1/1 1 hole, 1 1/2" diameter<br />
❑ LBS6810/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS6810/316-1 Custom (non-returnable)<br />
1 1/2" (38mm) duplex waste assembly rubber stopper<br />
❑ LBS6810/316-3/1 1 hole, 1 1/2" diameter<br />
❑ LBS6810/316-3/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS6810/316-3 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
110 0311