Untitled - Franke

Type 316 Laboratory Sinks
18 1/8" [46cm]
16" [41cm]
18 1/8˝ [46cm]
8"
[20cm]
16˝ [41cm]
10˝ [25cm]
18" [46cm]
20 1/8" [51cm]
18˝ [46cm]
20 1/8˝ [51cm]
11 13/16"
[30cm]
10 1/16"
[26cm]
9 1/16˝
[23cm]
10 1/16˝
[26cm]
S6808/316-1
SPECIFICATION:
Single compartment sink less faucet ledge. 20 gauge, type 316,
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.
Undercoated to reduce condensation and resonance. Includes factory
applied rim seal, installation kit and
3 1/2" (89mm) crumb cup waste assembly, location center back.
COMPARTMENT SIZE: 16" x 18" x 8" (41cm x 46cm x 20cm)
OVERALL SIZE: 18 1/8" x 20 1/8" (46cm x 51cm )
NOTES:
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
S6810/316-
SPECIFICATION:
Single compartment sink less faucet ledge. 20 gauge, type 316,
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.
Undercoated to reduce condensation and resonance. Includes factory
applied rim seal, installation kit and waste assembly.
COMPARTMENT SIZE: 16" x 18" x 10" (41cm x 46cm x 25cm)
OVERALL SIZE: 18 1/8" x 20 1/8" (46cm x 51cm)
WASTE OPTIONS:
❑ S6810/316-1 3 1/2" (89mm) crumb cup waste assembly,
location center.
❑ S6810/316-3 1 1/2" (38mm) duplex waste assembly with rubber
stopper, location left rear.
NOTES:
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
106 0311