Untitled - Franke

Securityware Products - Drinking Fountains
1"
(3cm)
18"
(46cm)
4" (10cm)
1
HDDF1818-RM
18" (46cm)
11"
(28cm)
2
3
3"
(7cm)
HDDF1818-RM
Heavy Duty Drinking Fountain
Fixture Specification:
This Heavy Duty Drinking Fountain is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
type 304 18-10 stainless steel. It is seamlessly welded and polished to a
satin finish. The drinking bubbler is chrome plated lead free brass.
Compartment Size: (FB x LR x D):
18" (46cm) x 18" (46cm) x 11" (28cm)
Bowl Size: (FB x LR x D):
8 1/2" (22cm) x 14 1/4" (37cm) x 1 1/2" (4cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading (4) 1/2”
(13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by supplied
hardware. (Standard included hardware is for walls up to 8" (20cm) thick).
For existing walls, an optional metal cutout template is available. For new
block (CMU) or poured concrete walls, an optional wall sleeve is available.
Available Controls:
The bubbler is controlled with an air-operated self closing valve with a
non-hold open feature. Flow time is adjustable from approximately 5 to 60
seconds. The valve is operated by a vandal resistant push button which
requires less than 5lbs to operate. The valve can be mounted up to 10 feet
(3meters) away from the push button. Valve conforms to the requirements
of ASME A112.18.1-2005/CSA B125.1-05.
FIXTURE OVERVIEW:
1 Deck Mounted Bubbler
2 Push Button Actuator
3
1.5” Waste Outlet
160 0311