Untitled - Franke

Vanity Basins
Round - No ledge
0311
C
OV17/6 SHOWN
B
A
SPECIFICATION:
18 gauge, type 304, 18-10 stainless steel. Self rimming and positive
hold down clamping. Mirror finished rim, satin finished bowl.
Undercoated to reduce condensation and resonance.
NOTES:
• Electronic specifications, reference www.kindred-commercial.com
• 5" deep models only: The model as constructed is subject to the
interpretation of local building codes. Check ADA, local wheelchair
accessibility guidelines and local building codes to ensure the
unobstructed knee space is achieved after installation.
OVERALL DIMENSIONS SINK COMPARTMENT DIMENSIONS
CAN A B C WASTE
ADA MODEL DIAMETER DIAMETER (DEPTH) HOLE SIZE OVERFLOW
• V17/5 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) No
• OV17/5 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) Yes
• OV17/5D 16 3/4" (42cm) 14" (36cm) 5" (13cm) 1 1/2" (38mm) No
V17/6 16 3/4" (42cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) No
OV17/6 16 3/4" (42cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) Yes
• V19/5 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) No
• OV19/5 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/4" (32mm) Yes
• V19/5D 18 3/4" (47cm) 14" (36cm) 5" (13cm) 1 1/2" (38mm) No
V19/6 18 3/4" (47cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) No
OV19/6 18 3/4" (47cm) 14" (36cm) 6" (15cm) 1 1/4" (32mm) Yes
43
GENERAL
INFORMATION
SINGLE COMPARTMENT
DROP-IN SINKS
CLASSROOM
SINKS
DOUBLE COMPARTMENT
DROP-IN SINKS
TRIPLE COMPARTMENT
DROP-IN SINKS
UNDERMOUNT
SINKS
VANITY
BASINS
DRAINBOARD
SINKS
SCULLERY
SINKS