Untitled - Franke

Wash Basins & Trough Sinks Wall Hung Hand Wash Sinks
0311
3 3/4"
[9.5cm]
3 3/4"
[9.5cm]
8 1/4"
[21cm]
14" [36cm]
16 1/2" [42cm]
16" [41cm]
18 1/2" [47cm]
9 1/4"
[23cm]
7 1/4"
[18cm]
12"
[30cm]
17"
[43cm]
6" [15cm]
11"
[28cm]
14"
[36cm]
19"
[48cm]
7" [18cm]
CAN
WHB1617-
SPECIFICATION:
18 gauge, type 302, 18-8 stainless steel. Polished satin finish. Radius
coved bowl corners. 16 gauge side wall brackets. One piece wall hanger.
Waste assembly center back.
COMPARTMENT SIZE: 12" x 14" x 6" (30cm x 36cm x 15cm)
OVERALL SIZE: 17" x 16 1/2" (43cm x 42cm)
BACKSPLASH: 3 3/4" (10cm)
WASTE & FAUCET HOLE DRILLING OPTIONS:
1 1/2" (38mm) duplex waste assembly with rubber stopper
❑ WHB1617-3/1 1 hole, 1 1/2" diameter
❑ WHB1617-3/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1617-3 Custom (non-returnable)
1 1/2" (38mm) duplex waste assembly with rubber stopper
and integral overflow
❑ WHB1617-6/1 1 hole, 1 1/2" diameter
❑ WHB1617-6/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1617-6 Custom (non-returnable)
Accepts 1 1/4" (32mm) waste assembly (not included)
❑ WHB1617-7/1 1 hole, 1 1/2" diameter
❑ WHB1617-7/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1617-7 Custom (non-returnable)
*For custom please specify drilling requirements.
NOTES:
• Separate sink carrier not required
• T316 equivalent, reference Type 316 laboratory section
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
WHB1819-
SPECIFICATION:
18 gauge, type 302, 18-8 stainless steel. Polished satin finish. Radius
coved bowl corners. 16 gauge side wall brackets. One piece wall hanger.
Waste assembly center location.
COMPARTMENT SIZE: 14" x 16" x 7" (36cm x 41cm x 18cm)
OVERALL SIZE: 19" x 18 1/2" (48cm x 47cm)
BACKSPLASH: 3 3/4" (10cm)
WASTE & FAUCET HOLE DRILLING OPTIONS:
1 1/2" (38mm) duplex waste assembly with rubber stopper
❑ WHB1819-3/1 1 hole, 1 1/2" diameter
❑ WHB1819-3/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1819-3 Custom (non-returnable)
1 1/2" (38mm) duplex waste assembly with rubber stopper
and integral overflow
❑ WHB1819-6/1 1 hole, 1 1/2" diameter
❑ WHB1819-6/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1819-6 Custom (non-returnable)
Accepts 1 1/4" (32mm) waste assembly (not included)
❑ WHB1819-7/1 1 hole, 1 1/2" diameter
❑ WHB1819-7/3 3 hole, 1 1/4" diameter, 4" centerset
❑ WHB1819-7 Custom (non-returnable)
*For custom please specify drilling requirements.
NOTES:
• Separate sink carrier not required
• T316 equivalent, reference Type 316 laboratory section
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
81
GENERAL
INFORMATION
WASH BASINS &
TROUGH SINKS
CLASSROOM
SINKS
DOUBLE COMPARTMENT
DROP-IN SINKS
TRIPLE COMPARTMENT
DROP-IN SINKS
UNDERMOUNT
SINKS
VANITY
BASINS
DRAINBOARD
SINKS
SCULLERY
SINKS