Untitled - Franke

Securityware Products - Wash Basins & Sinks
18 1/2"
(47cm)
3" (8cm)
AHDSB1918-RM-SV shown
1
18" (46cm)
2
17"
(43cm)
4
3
5"
(13cm)
AHDSB1918-RM- -
Accessible Heavy Duty Security Basin
Fixture Specification:
This Heavy Duty Security Wheel Chair Accessible Basin is designed for areas
requiring the utmost in vandal resistance. The fixture is fabricated from heavy
14 gauge type 304 18-10 stainless steel. It is seamlessly welded and
polished to a satin finish.
Compartment Size: (FB x LR x D):
18 1/2" (47cm) x 18" (46cm) x 17" (43cm)
Bowl Size: (FB x LR x D):
9 1/2" (24cm) x 16" (41cm) x 5" (13cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading (4) 1/2”
(13mm) diameter anchor rods to the back of the fixture. The anchor rods are
then secured on the chase side of the wall with supplied hardware. (Standard
included hardware is for walls up to 8" (20cm) thick).
For existing walls, an optional metal cutout template is available. For new
block (CMU) or poured concrete walls, an optional wall sleeve is available.
Available Controls:
The basin is controlled with an air-operated self closing valve with a non-hold
open feature. Flow time is adjustable from approximately 5 to 60 seconds
(depending on water temperature). The valve is operated by a vandal
resistant push button which requires less than 5lbs to operate. The valve
can be mounted up to 10 feet (3meters) away from the push button. Valve
conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05.
See basin valve options for available configurations.
FIXTURE OVERVIEW:
1 Bubbler
2 Push Button Actuator
3 1.5" OD Waste Elbow
4
Waste Breather Tube
AVAILABLE WALL MOUNTED ACCESSORIES:
Security Mirror (12" x 16") M1216
Security Mirror (12" x 24") M1224
Security Mirror (24" x 40") M2440
Centrefeed Paper Roll Box TD350
Soap Dispenser SD300
150 0311