Untitled - Franke

Securityware Products - Combi Units, Water Closets & Urinals
12 1/2"
(32cm)
19"
(48cm)
8"
(20cm)
14" (36cm)
HDU1314-RM shown
1
1"
(3cm)
2
3
HDU1314-RM-
Heavy Duty Urinal
Fixture Specification:
This Heavy Duty Urinal is designed for areas requiring the utmost in vandal
resistance. The fixture is fabricated from heavy 14 gauge type 304 18-10
stainless steel. The fixture is seamlessly welded and polished to a satin finish.
The urinal has an integral flushing rim for sanitary wash down. Includes integral
beehive strainer and 1 1/2” removable P-Trap (concealed within shroud).
Urinal Fixture (FB x LR x D):
12 1/2" (32cm) x 14" (35cm) x 27" (68cm)
The fixture is tested and certified to ASME A112.19.2-2008/CSA
B45.1-08 as a Low Consumption Urinal using 1.0 gpf / 3.8 lpf or less.
Installation:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading 4 1/2”
(13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by means of the
supplied nuts and washers. (Standard included hardware is for walls up to 8"
(20cm) thick).
For existing walls, an optional metal cutout template is available. For new
block (CMU) or poured concrete walls, an optional wall sleeve is available.
FIXTURE OVERVIEW:
1 3/4" Back Spud Connection
2 Beehive Strainer
3 1 1/2" OD Waste
144 0311