Untitled - Franke
Untitled - Franke
Untitled - Franke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Type 316 Laboratory Sinks<br />
0311<br />
20 9/16˝ [52cm]<br />
16˝ 41cm]<br />
5˝ [13cm]<br />
20 1/2" [52cm]<br />
16" [41cm]<br />
7" [18cm]<br />
18˝ [46cm]<br />
20 1/8˝ [51cm]<br />
18" [46cm]<br />
20" [51cm]<br />
12 1/16˝<br />
[31cm]<br />
14 1/16˝<br />
[36cm]<br />
11 3/4"<br />
[30cm]<br />
10"<br />
[25cm]<br />
CAN<br />
ALBS6805/316-1<br />
SPECIFICATION:<br />
ADA compliant, single compartment sink with faucet ledge.<br />
20 gauge, type 316, 18-8 stainless steel. Self rimming. Exposed<br />
surfaces are stain finished. Undercoated to reduce condensation and<br />
resonance. Includes factory applied rim seal, Universal Installation<br />
System hardware and 3 1/2" (89mm) crumb cup waste assembly,<br />
location rear corner for improved accessibility.<br />
COMPARTMENT SIZE: 16" x 18" x 5" (41cm x 46cm x 13cm)<br />
OVERALL SIZE: 20 9/16" x 20 1/8" (52cm x 51cm)<br />
FAUCET HOLE DRILLING OPTIONS:<br />
❑ ALBS6805/316-1/1 1 hole, 1 1/2" diameter<br />
❑ ALBS6805/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ ALBS6805/316-1 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
• The model as constructed is subject to the interpretation of ADA<br />
requirements. Check ADA and local codes to ensure the unobstructed<br />
knee space is achieved after installation.<br />
LBS6807/316-1<br />
SPECIFICATION:<br />
Single compartment sink with faucet ledge. 20 gauge, type 316,<br />
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.<br />
Undercoated to reduce condensation and resonance. Includes factory<br />
applied rim seal, Universal Installation System hardware and<br />
3 1/2" (89mm) crumb cup waste assembly, location center back.<br />
COMPARTMENT SIZE: 16" x 18" x 7" (41cm x 46cm x 18cm)<br />
OVERALL SIZE: 20 1/2" x 20" (52cm x 51cm)<br />
FAUCET HOLE DRILLING OPTIONS:<br />
❑ LBS6807/316-1/1 1 hole, 1 1/2" diameter<br />
❑ LBS6807/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS6807/316-1 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
109<br />
GENERAL<br />
INFORMATION<br />
SINGLE COMPARTMENT<br />
DROP-IN SINKS<br />
CLASSROOM<br />
SINKS<br />
DOUBLE COMPARTMENT<br />
DROP-IN SINKS<br />
TRIPLE COMPARTMENT<br />
DROP-IN SINKS<br />
TYPE 316<br />
LABORATORY<br />
VANITY<br />
BASINS<br />
DRAINBOARD<br />
SINKS<br />
SCULLERY<br />
SINKS