Untitled - Franke

Wash Basins & Trough Sinks Wall Hung Lavs
12 3/16" [31cm]
6 1/8"
[15cm]
12 3/16" [31cm]
11 7/16" [29cm]
15 3/4”
[40 cm]
4"
[10cm]
5/8"
[2cm]
2 7/8
6 1/2”
[16.5 cm]
12 3/16" [31cm]
MOUNTING INFORMATION
1
10 5/8" [27cm]
13/16" [2cm]
10 1/2” [27 cm]
4 1/2"
[11cm]
WT310E-7
SPECIFICATION:
Single compartment corner wall mount wash basin with faucet ledge. 19
gauge, 18-10 stainless steel. Exposed surfaces are brushed finish.
Includes installation kit. Accepts 1 1/4" (32mm) center waste assembly
(not included). Mounting hardware included.
COMPARTMENT SIZE: 6 1/8" x 11 7/16" x 4 1/2"
(15cm x 29cm x 11cm)
OVERALL SIZE: 12 3/16" x 12 3/16" (31cm x 31cm)
FAUCET HOLE DRILLING OPTIONS:
❑ WT310E-7/1 1 hole, 1 1/2" diameter
❑ WT310E-7 Custom (non-returnable)
*For custom please specify drilling requirements.
NOTES:
• Electronic specifications, reference www.kindred-commercial.com
WT-RS
Shroud for Wash Basins
SPECIFICATION:
Trap cover manufactured from 18 gauge, 18-10 stainless steel. Exposed
surfaces are brush finished. For wallmount installation
of wash basin models WT400C, WT500C, and WT600C.
OVERALL SIZE: 10 1/2" x 15 3/4" x 6 1/2"
(27cm x 40cm x 17cm)
NOTES:
• Electronic specifications, reference www.kindred-commercial.com
CMPX150 MOUNTING SYSTEM
In-wall mounting system for wall hung stainless steel wash basins
with single hole mixer. For use with wash basins WT400C, WT500C,
WT600C and WHB Series.
NOTES:
• Consult local Building and Fire Codes to ensure compliance and
requirements for the installation of an in-wall wood support frame.
84 0311