Untitled - Franke
Untitled - Franke
Untitled - Franke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Securityware Products - Wash Basins & Sinks<br />
12 1/2"<br />
(32cm)<br />
14 1/2"<br />
(37cm)<br />
1" (3cm)<br />
4" (10cm)<br />
5" (13cm)<br />
HDSB1318-RM-DV shown<br />
1<br />
18" (46cm)<br />
2 3<br />
5<br />
6<br />
4<br />
10 1/2" (27cm)<br />
HDSB1318-RM- -<br />
Heavy Duty Security Basin<br />
Fixture Specification:<br />
This Heavy Duty Security Basin is designed for areas requiring the utmost<br />
in vandal resistance. The fixture is fabricated from heavy 14 gauge type 304<br />
18-10 stainless steel. It is seamlessly welded and polished to a satin finish.<br />
Compartment Size: (FB x LR x D):<br />
12 1/2" (32cm) x 18" (46cm) x 14 1/2" (37cm)<br />
Bowl Size: (FB x LR x D):<br />
9 1/2" (24cm) x 16" (41cm) x 5" (13cm)<br />
The fixture is tested and certified to:<br />
ASME A112.19.3-2008/CSA B45.4-08 standards.<br />
Installation:<br />
These fixtures are designed to be installed onto finished walls which are<br />
serviceable from a pipe chase. Installation is achieved by threading (4) 1/2"<br />
(13mm) diameter anchor rods to the back of the fixture. The anchor rods are<br />
then secured on the chase side of the wall with supplied hardware. (Standard<br />
included hardware is for walls up to 8" (20cm) thick).<br />
For existing walls, an optional metal cutout template is available. For new<br />
block (CMU) or poured concrete walls, an optional wall sleeve is available.<br />
Available Controls:<br />
The basin is controlled with an air-operated self closing valve with a non-hold<br />
open feature. Flow time is adjustable from approximately 5 to 60 seconds and<br />
has a flow rate of 0.5 gpm (1.9 lpm). The valve is operated by a vandal resistant<br />
push button which requires less than 5lbs to operate. The valve can be mounted<br />
up to 10 feet (3 meters) away from the push button. Valve conforms to the<br />
requirements of ASME A112.18.1-2005/CSA B125.1-05. See basin valve<br />
options for available configurations.<br />
FIXTURE OVERVIEW:<br />
1 Integral Soap Dish<br />
2 Bubbler<br />
3 Push Button Actuator<br />
4 1 1/2" OD Plain Outlet Brass Waste<br />
5 Waste Air Vent<br />
6 Threaded Mounting Locations (4)<br />
AVAILABLE WALL MOUNTED ACCESSORIES:<br />
Security Mirror (12" x 16") M1216<br />
Security Mirror (12" x 24") M1224<br />
Security Mirror (24" x 40") M2440<br />
Centrefeed Paper Roll Box TD350<br />
Soap Dispenser SD300<br />
148 0311