Untitled - Franke

Wash Basins & Trough Sinks Clinical Hand Wash Basins
21” [53cm]
Integrally welded 1.5"
tailpiece
14"
[36cm]
37”
[94cm]
26 1/2”
[67cm]
10”
[25cm]
18 3/4” [48cm]
3”
[8 cm]
17 1/4" [44cm]
3 1/4"
[8cm]
12" [31cm]
2"
[5cm]
4 1/2”
[11 cm]
14”
[36 cm]
15 1/2"
[39cm]
9"
[23cm]
6"
[15cm]
HWS1420P-00
SPECIFICATION:
18 gauge, type 304, 18-10 stainless steel medical hand wash basin.
Polished to a #4 satin finish. Fixture bowl is constructed with radius
coved corners. Integral side splashes help prevent splashing and
contamination of nearby surfaces. Waste location is left rear and
includes integral tailpiece. Wall hangers included. Saniguard ® product
protection on all exposed surfaces of sink.
COMPARTMENT SIZE: 14" x 20" x 10" (35cm x 51cm x 25cm)
OVERALL SIZE: 18 3/4" x 21" x 37" (48cm x 53cm x 94cm)
BACKSPLASH: 26 1/2" (67cm)
NOTES:
• Separate sink carrier is not required
• To learn more about Saniguard ® product protection, see page 76.
• Electronic specifications, reference www.kindred-commercial.com
WHB1616-3
NEW
SPECIFICATION:
Wall hung basin. 18 gauge, type 302, 18-8 stainless steel. Polished satin
finish. Radius coved bowl corners. One piece wall hanger. 1 1/2" waste
assembly, location center back.
COMPARTMENT SIZE: 12" x 14" x 6" (30cm x 36cm x 15cm)
OVERALL SIZE: 17 1/4" x 15 1/2" (44cm x 39cm)
BACKSPLASH: 9" (23cm)
FAUCET HOLE DRILLING OPTIONS:
❑ WHB1616-3 Custom (non-returnable)
NOTES:
• Vandal resistant waste, reference Waste Options in General
Information Section.
• Electronic specifications, reference www.kindred-commercial.com
• Specified faucet must be able to be mounted on a 2" wide backsplash.
80 0311