Untitled - Franke

Securityware Products - Drinking Fountains
0311
1"
(3cm)
18"
(46cm)
13"
(33cm)
1
4" (10cm)
4
HDDF1818-FM
18" (46cm)
2
5
9"
(23cm)
3
HDDF1818-FM
Heavy Duty Drinking Fountain
Fixture Specification:
This Heavy Duty Drinking Fountain is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
type 304 18-10 stainless steel. It is seamlessly welded and polished to a
satin finish. The drinking bubbler is chrome plated lead free brass.
Compartment Size: (FB x LR x D):
18" (46cm) x 18" (46cm) x 13" (33cm)
Bowl Size: (FB x LR x D):
8 1/2" (22cm) x 14 1/2" (37cm) x 1 1/2" (4cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are not
accessible from a pipe chase. Installation is achieved by means of a wall
hanger bracket and lower mounting holes. Mounting hardware and plumbing
are all self contained and only accessed by a removable panel. The panel is
secured with tamper resistant screws.
Available Controls:
The bubbler is controlled with an air-operated self closing valve with a
non-hold open feature. Flow time is adjustable from approximately 5 to 60
seconds. The valve is operated by a vandal resistant push button which
requires less than 5lbs to operate. The valve can be mounted up to 10 feet
(3meters) away from the push button. Valve conforms to the requirements
of ASME A112.18.1-2005/CSA B125.1-05.
FIXTURE OVERVIEW:
1 Deck Mounted Bubbler
2 Push Button Actuator
3 1.5” P Trap
4 Removable Panel
5 Wall Hanger Bracket
161
GENERAL
INFORMATION
SINGLE COMPARTMENT
DROP-IN SINKS
CLASSROOM
SINKS
DOUBLE COMPARTMENT
DROP-IN SINKS
TRIPLE COMPARTMENT
DROP-IN SINKS
UNDERMOUNT
SINKS
VANITY
BASINS
DRAINBOARD
SINKS
SECURITYWARE