Untitled - Franke

Type 316 Laboratory Sinks
11 1/4˝ [29cm]
11 5/8˝ [30cm]
9 1/4˝ [24cm]
6˝
[15cm]
9 1/2˝ [24cm]
7˝ [18cm]
11 5/8˝ [30cm]
13 5/8˝ [35cm]
14 1/2˝ [37cm]
16 5/8˝ [42cm]
5 5/8˝
[14cm]
6 13/16˝
[17cm]
5 13/16˝
[15cm]
8 5/16˝
[21cm]
S9106/316-
SPECIFICATION:
Single compartment sink less faucet ledge. 20 gauge, type 316,
18-8 stainless steel. Self rimming. Exposed surfaces are satin
finished. Undercoated to reduce condensation and resonance.
Includes factory applied rim seal, installation kit and waste
assembly, location center.
COMPARTMENT SIZE: 9 1/4" x 11 5/8" x 6" (24cm x 30cm x 15cm)
OVERALL SIZE: 11 1/4" x 13 5/8" (29cm x 35cm)
WASTE OPTIONS:
❑ S9106/316-1 3 1/2" (89mm) crumb cup waste assembly.
❑ S9106/316-3 1 1/2" (38mm) duplex waste assembly
with rubber stopper.
NOTES:
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
S9407/316-
SPECIFICATION:
Single compartment sink less faucet ledge. 20 gauge, type 316,
18-8 stainless steel. Self rimming. Exposed surfaces are satin
finished. Undercoated to reduce condensation and resonance.
Includes factory applied rim seal, installation kit and waste
assembly, location center.
COMPARTMENT SIZE: 9 1/2" x 14 1/2" x 7"
(24cm x 37cm x 18cm)
OVERALL SIZE: 11 5/8" x 16 5/8" (30cm x 42cm)
WASTE OPTIONS:
❑ S9407/316-1 3 1/2" (89mm) crumb cup waste
assembly.
❑ S9407/316-3 1 1/2" (38mm) duplex waste assembly
with rubber stopper.
NOTES:
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
104 0311