Untitled - Franke

Wash Basins & Trough Sinks Wall Trough Sinks
Standard Series
Wall Hanger Bracket
Angle brackets (welded to sink)
D
B
C
F
E
A
SPECIFICATION:
16 gauge, 18-10, type 304 stainless steel. Waste fittings included.
Polished satin finish. Radius coved bowl corners. 14 gauge wall brackets.
One piece wall hanger. Waste assembly center located included. 3 1/2"
(89mm) crumb cup waste assembly, location center.
COMPARTMENT SIZE: 14 3/4" x 33 1/2" x 8" (38cm x 83cm x 20cm)
OVERALL SIZE: 18" x 36" (46cm x 91cm)
BACKSPLASH: 8" (20cm)
FAUCET HOLE DRILLING OPTIONS:
These models are not returnable once drilled to your specification. Faucet
hole locations should be indicated relative to the sink orientation as
shown in the catalogue drawings. A sketch is recommended.
NOTES:
• 1 1/2" (38mm) waste option available as a custom request
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
OVERALL DIMENSIONS SINK COMPARTMENT DIMENSIONS
A B C D E F WASTE FAUCET
MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH LOCATION HOLES OPTIONS
WTS36-1 18" (46cm) 36" (91cm) 14 3/4" (38cm) 33 1/2" (83cm) 8" (20cm) 8" C N/A
WTS48-1 18" (46cm) 48" (122cm) 14 3/4" (38cm) 44 1/2" (113cm) 8" (20cm) 8" C N/A
WTS60-1 18" (46cm) 60" (152cm) 14 3/4" (38cm) 56 1/2" (144cm) 8" (20cm) 8" C N/A
WTS72-1 18" (46cm) 72" (183cm) 14 3/4" (38cm) 68 1/2" (174cm) 8" (20cm) 8" C N/A
86 0311