Untitled - Franke

Wash Basins & Trough Sinks Wall Trough Sinks
Heavy Duty Series
0311
Wall Hanger Bracket
Angle brackets (welded to sink)
D
B
C
F
E
A
SPECIFICATION:
Single compartment wash trough. 14 gauge, type 304,18-10 stainless
steel. Polished to a #4 satin finish. 1" radius vertical and horizontal
coved corners & 1 1/2" rolled radius rims. Bowl sloped to drain.
Complete with wall hanger, stainless steel support brackets, and 3 1/2"
(89mm) crumb cup waste assembly.
FAUCET HOLE DRILLING OPTIONS:
These models are not returnable once drilled to your specification. Faucet
hole locations should be indicated relative to the sink orientation as
shown in the catalogue drawings. A sketch is recommended.
NOTES:
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
OVERALL DIMENSIONS SINK COMPARTMENT DIMENSIONS
A B C D E F WASTE FAUCET
MODEL (F-B) (L-R) (F-B) (L-R) (DEPTH) BACKSPLASH LOCATION HOLES OPTIONS
WTS2025-1 20" (51cm) 25" (64cm) 16 1/2" (42cm) 22" (56cm) 10 1/2" (27cm) 6" (15cm) C N/A
WTS2031-1 20" (51cm) 31" (79cm) 16 1/2" (42cm) 28" (71cm) 10 1/2" (27cm) 6" (15cm) C N/A
WTS2036-1 20" (51cm) 36" (91cm) 16 1/2" (42cm) 33" (84cm) 8" (20cm) 10" (25cm) C N/A
WTS2048-1 20" (51cm) 48" (122cm) 16 1/2" (42cm) 45" (114cm) 8" (20cm) 10" (25cm) C N/A
WTS2060-1 20" (51cm) 60" (152cm) 16 1/2" (42cm) 57" (145cm) 8" (20cm) 10" (25cm) C N/A
WTS2072-1 20" (51cm) 72" (183cm) 16 1/2" (42cm) 69 (175cm) 8" (20cm) 10" (25cm) C N/A
WTS2096-1 20" (51cm) 96" (244cm) 16 1/2" (42cm) 93 (236cm) 8" (20cm) 10" (25cm) C N/A
87
GENERAL
INFORMATION
WASH BASINS &
TROUGH SINKS
CLASSROOM
SINKS
DOUBLE COMPARTMENT
DROP-IN SINKS
TRIPLE COMPARTMENT
DROP-IN SINKS
UNDERMOUNT
SINKS
VANITY
BASINS
DRAINBOARD
SINKS
SCULLERY
SINKS