Untitled - Franke

Type 316 Laboratory Sinks
7 5/8"
(19cm)
4 1/2"
(11cm)
27 3/16" [69cm]
24" [61cm]
27 3/8" [70cm]
27 3/16"
[69cm]
9"
[23cm]
14"
[36cm]
44 1/16"
[112cm]
21"
[53cm]
6"
(15cm)
27 3/16" [69cm]
RC6/316
SPECIFICATION:
20 gauge, type 316, 18-8 stainless steel. Self rimming. Exposed surfaces
are sand-blast finished. Positive hold down clamping.
1 1/2" (38mm) duplex waste assembly is integral (tailpiece optional*).
COMPARTMENT SIZE: 6" x 4 1/2" (15cm x 11cm)
OVERALL SIZE: 7 5/8" (19cm)
NOTES:
• * These sinks do not include tailpiece. A type 316 tailpiece is available
by ordering 315-9/316
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
SL2424/316-
SPECIFICATION:
16 gauge, type 316 stainless steel. Exposed surfaces are polished satin
finished. Radius coved bowl corners. Waste assembly included.
COMPARTMENT SIZE: 24" x 24" x 14" (61cm x 61cm x 36cm)
OVERALL SIZE: 27 3/16" x 27 3/16" (69cm x 69cm)
BACKSPLASH: 9" (23cm)
FLOOR TO WORK SURFACE: 35" (89cm)
WASTE & FAUCET HOLE DRILLING OPTIONS:
3 1/2" (89mm) crumb cup waste assembly, location center
❑ SL2424/316-1/2 2 hole, 1 1/4" diameter, 8" centerset
❑ SL2424/316-1 Custom (non-returnable)
1 1/2" (38mm) duplex waste assembly with stand pipe and guard,
location right rear.
❑ SL2424/316-5/2 2 hole, 1 1/4" diameter, 8" centerset
❑ SL2424/316-5 Custom (non-returnable)
*For custom please specify drilling requirements.
NOTES:
• All type 316 sinks include type 316 waste assemblies
• Vandal resistant waste, reference Waste Options in General
Information Section
• Electronic specifications, reference www.kindred-commercial.com
116 0311