Untitled - Franke
Untitled - Franke
Untitled - Franke
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Type 316 Laboratory Sinks<br />
0311<br />
3 3/4"<br />
[9.5cm]<br />
3 3/4"<br />
[9.5cm]<br />
8 1/4"<br />
[21cm]<br />
14" [36cm]<br />
16 1/2" [42cm]<br />
16" [41cm]<br />
18 1/2" [47cm]<br />
9 1/4"<br />
[23cm]<br />
7 1/4"<br />
[18cm]<br />
12"<br />
[30cm]<br />
17"<br />
[43cm]<br />
6" [15cm]<br />
11"<br />
[28cm]<br />
14"<br />
[36cm]<br />
19"<br />
[48cm]<br />
7" [18cm]<br />
CAN<br />
WHB1617/316-3<br />
SPECIFICATION:<br />
18 gauge, type 316 stainless steel. Exposed surfaces are polished satin<br />
finished. Radius coved bowl corners. 16 gauge side wall brackets. One<br />
piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with<br />
rubber stopper, location center back.<br />
COMPARTMENT SIZE: 12" x 14" x 6" (30cm x 36cm x 15cm)<br />
OVERALL SIZE: 17" x 16 1/2" (43cm x 42cm)<br />
BACKSPLASH: 3 3/4" (10cm)<br />
FAUCET HOLE DRILLING OPTIONS:<br />
❑ WHB1617/316-3/1 1 hole, 1 1/2" diameter<br />
❑ WHB1617/316-3/3 3 hole, 1 1/2" diameter, 4" centerset<br />
❑ WHB1617/316-3 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• Separate sink carrier not required<br />
• All type 316 sinks include type 316 waste assemblies<br />
• The model as constructed is subject to the interpretation of local<br />
building codes. Check ADA, local wheelchair accessibility guidelines<br />
and local building codes to ensure the unobstructed knee space is<br />
achieved after installation.<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
WHB1819/316-3<br />
SPECIFICATION:<br />
18 gauge, type 316 stainless steel. Exposed surfaces are polished satin<br />
finished. Radius coved bowl corners. 16 gauge side wall brackets. One<br />
piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with<br />
rubber stopper, location center.<br />
COMPARTMENT SIZE: 14" x 16" x 7" (36cm x 41cm x 18cm)<br />
OVERALL SIZE: 19" x 18 1/2" (48cm x 47cm)<br />
BACKSPLASH: 3 3/4" (10cm)<br />
FAUCET HOLE DRILLING OPTIONS:<br />
❑ WHB1819/316-3/1 1 hole, 1 1/2" diameter<br />
❑ WHB1819/316-3/3 3 hole, 1 1/2" diameter, 4" centerset<br />
❑ WHB1819/316-3 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• Separate sink carrier not required<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
119<br />
GENERAL<br />
INFORMATION<br />
SINGLE COMPARTMENT<br />
DROP-IN SINKS<br />
CLASSROOM<br />
SINKS<br />
DOUBLE COMPARTMENT<br />
DROP-IN SINKS<br />
TRIPLE COMPARTMENT<br />
DROP-IN SINKS<br />
TYPE 316<br />
LABORATORY<br />
VANITY<br />
BASINS<br />
DRAINBOARD<br />
SINKS<br />
SCULLERY<br />
SINKS
Change language