Untitled - Franke
Untitled - Franke
Untitled - Franke
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Type 316 Laboratory Sinks<br />
0311<br />
14 1/16" [36cm]<br />
18 13/16"<br />
[48cm]<br />
9 1/2"<br />
[24cm]<br />
7" [18cm]<br />
14"<br />
[36cm]<br />
7" [18cm]<br />
14 1/2" [37cm]<br />
16 5/8" [42cm]<br />
16" [41cm]<br />
18 1/8" [46cm]<br />
5 13/16"<br />
[15cm]<br />
8 5/16" [21cm]<br />
8 1/16"<br />
[20cm]<br />
9 1/16"<br />
[23cm]<br />
LBS9407/316-<br />
SPECIFICATION:<br />
Single compartment sink with faucet ledge. 20 gauge, type 316,<br />
18-8 stainless steel. Self rimming. Exposed surfaces are satin finished.<br />
Undercoated to reduce condensation and resonance. Includes factory<br />
applied rim seal, Universal Installation System hardware and waste<br />
assembly, location center.<br />
COMPARTMENT SIZE: 9 1/2" x 14 1/2" x 7" (24cm x 37cm x 18cm)<br />
OVERALL SIZE: 14 1/16" x 16 5/8" (36cm x 42cm)<br />
WASTE & FAUCET HOLE DRILLING OPTIONS:<br />
3 1/2" (89mm) crumb cup waste assembly<br />
❑ LBS9407/316-1/1 1 hole, 1 1/2" diameter<br />
❑ LBS9407/316-1/2 2 hole, 1 1/2" diameter, 4" centers<br />
❑ LBS9407/316-1 Custom (non-returnable)<br />
1 1/2" (38mm) duplex waste assembly with rubber stopper<br />
❑ LBS9407/316-3/1 1 hole, 1 1/2" diameter<br />
❑ LBS9407/316-3/2 2 hole, 1 1/2" diameter, 4" centers<br />
❑ LBS9407/316-3 Custom (non-returnable)<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
LBS4607/316-<br />
SPECIFICATION:<br />
Single compartment sink with faucet ledge. 20 gauge, type 316,<br />
18-18 stainless steel. Self rimming. Exposed surfaces are satin finished.<br />
Undercoated to reduce condensation and resonance. Includes factory<br />
applied rim seal, Universal Installation System hardware and waste<br />
assembly, location center.<br />
COMPARTMENT SIZE: 14" x 16" x 7" (36cm x 41cm x 18cm)<br />
OVERALL SIZE: 18 13/16" x 18 1/8" (48cm x 46cm)<br />
WASTE & FAUCET HOLE DRILLING OPTIONS:<br />
3 1/2" (89mm) crumb cup waste assembly<br />
❑ LBS4607/316-1/1 1 hole, 1 1/2" diameter<br />
❑ LBS4607/316-1/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS4607/316-1 Custom (non-returnable)<br />
1 1/2" (38mm) duplex waste assembly with rubber stopper<br />
❑ LBS4607/316-3/1 1 hole, 1 1/2" diameter<br />
❑ LBS4607/316-3/3 3 hole, 1 1/2" diameter, 4" centers, 8" centerset<br />
❑ LBS4607/316-3 Custom (non-returnable)<br />
*For custom please specify drilling requirements.<br />
NOTES:<br />
• All type 316 sinks include type 316 waste assemblies<br />
• Vandal resistant waste, reference Waste Options in General<br />
Information Section<br />
• Electronic specifications, reference www.kindred-commercial.com<br />
107<br />
GENERAL<br />
INFORMATION<br />
SINGLE COMPARTMENT<br />
DROP-IN SINKS<br />
CLASSROOM<br />
SINKS<br />
DOUBLE COMPARTMENT<br />
DROP-IN SINKS<br />
TRIPLE COMPARTMENT<br />
DROP-IN SINKS<br />
TYPE 316<br />
LABORATORY<br />
VANITY<br />
BASINS<br />
DRAINBOARD<br />
SINKS<br />
SCULLERY<br />
SINKS