2013 HVAC Catalog.pdf - Keysource Marketing Ltd

ACCESSORIES & TOOLSSQUARE HEAD BOLT SOCKET ADAPTERTHE SQUARE WONDER SQUARE HEAD BOLT SOCKET ADAPTERT-516This incredible tool fits into 1/2” hex sockets and enables the technician to easily remove 5/16”square head locking bolts. It allows easy access to places where valve wrenches will not workor when more leverage is required.COMMON APPLICATIONS INCLUDE:• Refrigeration & A/C service valves.• Condenser fan blades with bottom side and right side up hubs.• Small and large concave blower wheels.• Beam clamps for hanging all-thread rods(used in electrical, plumbing and A/C applications).• Square head lag screws.• Pipe plugs, pump heads for gauge ports, water and pneumatic plugs,gas furnace manifold plugs.• Adjustment screws for pressure switches.• Great for Carrier, York, Addison, Rheem, Aaon, Bard, Trane and many more.T-516HEATERSQuick and easy process of pressurizing a refrigerant supply cylinder to move any refrigerant to another vessel.CYLINDER HEATER3054A quick, convenient, easy-to-use means to pressurize refrigerant supply cylinders tomove any refrigerant to another vessel or charging dispenser, the 3054 Cylinder Heater isdesigned to fit 30Ib. and 50Ib. containers. It also can be used on 125Ib. cylinders and fitsthe refrigerant cylinders in many recovery units. The device consists of a 6” x 28” flexiblesilicone rubber heating element with extra-Iong Velcro straps, built-in molded thermostat,and power cord. The heater draws 200 watts at 120 VAC and has a 135° preset thermostat.3054-230V230 Volt model available for European market.305463