2013 HVAC Catalog.pdf - Keysource Marketing Ltd

CHARGING SCALESCHARGING SCALESCHARGING SCALE4900The 4900 refrigerant charge scale is the ideal choice for field service work. With a high resolution LCD screen that reads inboth lbs. and kg., this scale comes packaged in a convenient carrying case and is powered by (1) 9 volt battery (included).Features• Battery operated (9V) for ease of portability.• 220lbs. (100kg.) capacity.• High resolution LCD screen with backlight capability.• Automatically powers off.• 5g, 0.25oz. resolution.• Readout in lbs. or kg.• Zero/Tare capable.• Weight 6.5lbs.• Extra sturdy aluminum bound case.Convenient solution forrefrigerant charging.Easy to use, even easierto carry around.4900OIL PUMPS & ACCESSORIESOIL PUMPS & ADAPTERS KITSPrecisely and exactly the right amount of oil in the cleanest and most efficient manner. Allow for all popularsizes of oil cans and bottles to fit with our oil pumps.CHARGE-OIL PUMPIt charges without pumping the compressor down thus reducing charging time by over 70%. Also avoids theembarrassment of spilling oil on the customer’s premises. Provides the professional touch since oil can be accuratelymeasured into the compressor without having to pour it from the can. Fits all popular brands of refrigeration oil.Complete Adapter Kit supplied to accommodate most containers. The Charge-Oil Pump cap seals the can so pumpneed not be removed until can is empty. Thermal Charge-Oil Pump is a piston type high pressure pump designedto operate at pressures to 250 PSI. It pumps one quart in 20 full strokes of the piston. Pump is connected tocompressor by refrigerant charging line or copper tubing from 1/4” male fitting.Suitable for use with alkybenzene and POE oils.PART NO.DESCRIPTION1702 Imperial-Thermal Charge-Oil Pump1703 Imperial-Thermal Charge-Oil Pump for 5 Gallon Can1702, 1703, 1751CHANGE-OIL PUMP17511751 Change-Oil Pump is a companion to the famous Imperial-Thermal Engineering 1700 Charge-Oil Pump. It has been designed for usein pumping oil from refrigeration compressors, marine engines, and other equipment where it is impossible to drain oil in the conventionalmanner. Removing oil from refrigeration compressors before dehydrating with vacuum is a necessity. Suction tube is 5/16” OD semi-rigid plastic,15” long. Suction tubes up to 60” long can be used if necessary. Will not pump under pressure. Pumping capacity about 10 strokes per quart.ADAPTERS & REPAIR KITSPART NO. NAME DESCRIPTION1705 1702 & 1703 Repair Kit Complete set of gaskets, bearings, rings, springs and washers for the repair of Imperial-Thermal oil pumps1751RK 1751 Repair Kit Complete set of gaskets, bearings, rings, springs and washers for the repair of Imperial-Thermal oil pumps1768 Adapter Kit Adapter kit for all popular cans and bottles of refrigerant oil. Kit contains 5 rings and one spacer toaccommodate most oil containers1770 Adapter Kit Suction adapter for aluminum Charge-Oil Pump. Converts part no. 1702 Charge-Oil Pump into suction pump forrefrigeration, marine and other similar applications where it is impossible to draw oil in the normal manner64