2013 HVAC Catalog.pdf - Keysource Marketing Ltd

CONVERTIBLE RETAINING RING PLIERSUNIVERSAL CONVERTIBLE RETAINING RING PLIERSEASY TO CONVERT FROM INTERNAL TOEXTERNAL RINGS – SIMPLY MOVE LEVERS TOSWITCH. NO PINS TO PUSH!• Patented design allows for quick changeover.• Replaceable tips held firmly in place by hex-shapedlocking guides.• Tough steel construction for durability and strength.• Ergonomic anti-slip sealed air-pocket grips for comfort.• Spring loaded to speed the work.• Black oxide finish resists rust and corrosion.High carbon,hardened steelconstructionReplaceable tipsPatented lever designfor quick changeoverIR-92 FOR 1/8” TO 2” DIA. RINGSIncludes five pairs of color-coded precision-ground tipsand hex key wrench in convenient storage pouch:(2) 0.038 in. Yellow Tips(2) 0.038 in. Yellow 90° Tips(2) 0.047 in. Green Tips(2) 0.047 in. Green 90° Tips(2) 0.070 in. Copper TipsIR-92TP REPLACEMENT TIP KITIR-94 FOR 1/8” TO 1” DIA. RINGSIncludes five pairs of color-coded precision-ground tipsand hex key wrench in convenient storage pouch:(2) 0.024 in. Red Tips(2) 0.038 in. Yellow Tips(2) 0.038 in. Yellow 90° Tips(2) 0.047 in. Green Tips(2) 0.047 in. Green 90° TipsIR-94TP REPLACEMENT TIP KITIR-94IR-92Conforms to ASMEStandard B107.500-2010Internal (Housing)3/8 in. – 2 in. (10 mm – 48 mm)External (Shaft)1/8 in. – 2 in. (7 mm – 48 mm)Simple to Use1. Determine the largest size of tip that will fit the retaining ring holes. Insert tips into pliers andtighten set screws with included 3/16 in. hex key wrench.2. Convert pliers to internal or external position by gently squeezing grips and aligning edge ofjaws with mark on pliers. Push both levers to desired setting. See diagram.3. Use a punch or similar tool to break any bond created from rust or dirt that has accumulated in theretaining ring groove.4. Push the tips of the pliers as far as possible into the retaining ring holes before squeezing the handles.5. Use only as much pressure as needed to remove or install the retaining ring.82