Electronic Pressure Scanning Module Features General Description ...

SpecificationsInputs (Px):128 or 64 .042 inch (1.067mm)O.D. tubulationsFull ScaleRanges: ±10, ±20 inch H 2O, ±1, ±2.5, ±5,±15, 50 psid(2.5, 5, 7, 17, 35,100, 350 kPa)Accuracy: 1Sensor Addressing:Full Scale Output:Resolution:Scan Rate:10 to 20 in.H 2O ±0.15% F.S.1 psid ±0.12% F.S.2.5 psid ±0.10% F.S.5 to 50 psid ±0.08% F.S.6 bit binary, CMOS levelStandard: ±2.5VdcOptional: ±5Vdc, ±10VdcInfinite45kHzOperatingTemperature: 0° to 60°CTemperatureSensitivity: Range Zero Span10 inch H 2O 0.25% FS/°C 0.10% FS/°C20 inch H 2O 0.20% FS/°C 0.08% FS/°C1 to 50 psid 0.10% FS/°C 0.05% FS/°COverpressureCapability: 10 inch H 2O, 20 inch H 2O,(With no damage) 1 psid = 10 psi (70kPa)2.5-50 psid = 400% or 75 psi(517kPa) (whichever is less)MaximumReference Pressure: 50 psig (345kPa)MediaCompatibility: Gases compatible with silicon,silicone, aluminum, and Buna-NWeight: ZOC33/64Px: 11 ozs. (312 gm)ZOC33/64PxX2: 13 ozs. (369 gm)Ordering InformationZOC33 / 64Px -Model1 psidPressureRangesInputs64Px, for 64 Inputs64PxX2, for 128 inputsDuplexedWrite "Valveless" here forthis option only.Connector Type:PowerRequirements:Cannon 15 pin MDM 15SL2P± 15Vdc @ 110mAControl PressureRequirements: 65 psi instrument grade airDimensions Inches (mm).900(22.860)4.975(126.365)4.75(120.65)1 Note: Accuracies are following a calibration with Scanivalve DSM3400 or ERAD4000data systems.† 10 inch H 2O = 25.4 cm H 2O = .36127 psi‡ 20 inch H 2O = 50.8 cm H 2O = .72254 psi.113(2.87)REF MANIFOLD.063 DIA.145(3.683)XX PSIPxA INPUTPxB INPUTCAL MANIFOLD.040 DIAPxA CTLPxB CTLCAL CTLSENSOR PACK DETAIL.113(2.858)1.200(30.480)1.685(42.799)1.580(40.121)Scanivalve Headquarters1722 N. Madson StreetLiberty Lake, WA 99019Tel: 509-891-9970800-935-5151Fax: 509-891-9481e-mail: scanco@scanivalve.com4.474(113.64)www.scanivalve.com1.434(36.424)Printed in USA©2011 Scanivalve Corp.1106