NE 6 NE 8 NE 12 NE 16 NE 22 NE 28 NE 36 NE 42 ... - Masinateenus

Standard soundproofingClosed casingThe upper and lower damping systems isolatethe hammer from the casing. They reduce noiseand vibrations and prevent them from reachingthe carrier vehicle and operator.Easy and speedy maintenance:- No tie rod.- The clip holds the holding pin andchisel socket tight.- The guide bushing can be removedon the building site without tools.- The chisel can be quickly removedwithout any special tools.- Grease nipple is protected by the clip.New design- Optimum design: compact dimensions,reinforced housing.- Reinforced tools and new dust-protectioncover.- Speedy and easy access to wearing parts.An accessory that can be directly adaptedto the hammer is available for the completeproduct range*:- The shovel is for removing crushedmaterials.- The compressor is for soil compaction.Easy and speedy installation: the hammermust not be removed from the carriervehicle, no hydraulic connections.* Except NE 36, NE 50Automatic powerThe automatic pressure regulator guaranteessmooth operation with maximum impactpower on all carrier vehicles:- Constant performance regardless of oiltemperature variations.- Accumulator tank membrane protection.Easy installation- Huge oil supply.- High backpressure tolerance.Energy chamber with membraneA clearly visible advantage compared tonitrogen chambers with piston:- Pressure from nitrogen remains constantand guarantees maximum performance.- Easier maintenance, no regular refilling ofthe energy chamber.- Longer service life compared to the pistonsealing gaskets of systems withoutmembrane.- The hammer is operational once mountedon the carrier vehicle.Hydraulic hammersFor 0.7 to 15-tonnecarrier vehicles.ModellNE6 NE8 NE12 NE16 NE22 NE28 NE36 NE42 NE50 NE700Carrier vehicle weight (to) 0,7-1,2 1–1,6 1,2 –2 1,5–3,5 2–5 3–7 4–9 5–12 6–14 12-20Hammer weight (kg) 63 88 110 150 220 285 350 438 467 962Oil pressure (bar) 125 120 120 120 120 120 125 125 120 140Oil quantity (l/min) 13-23 15–30 17–35 25–50 30–65 40–75 55–100 70–120 80–125 80-140Admissible backpressure 30 35 32 32 30 30 22 20 19 16(bar)Strike frequency (1/min) 1450 1600 1700 1500 1310 1420 1400 1450 1025 880Tool diameter (mm) 37 45 47 55 65 72 75 84 95 112ADAPTABLE ACCESSORYHammer + shovel weight26 103 138 178 288 328(kg)Shovel width (mm) 225/300 225/300 300 300 300/450 300/450Shovel volume (l) 11/16 11/16 20 20 35/55 35/55Weight: hammer +115 154 197 295 338compressor (kg)Compressor width 1/2 (mm) 230 225/270 225/270 280/330 280/330Compressor length 1/2 (mm) 330 400 400 500 500Compressor contactsurface 1/2 (cm 2 )760 900/1080 900/1080 1400/1650 1400/1650A Wacker Neuson product made by Montabert.Contact address for orders:MONTABERT203, route de GrenobleB.P. 67169805 Saint Priest C2dexFranceTel. +33 4 7722 9797Fax +33 4 7722 9779montabert_marketing@diiattachments.com1000153109/09/2010/Heidlmair/Friedrich VDVHydraulic hammersFor 0.7 to 15-tonne carrier vehicles.NE 6NE 8NE 12NE 16NE 22NE 28NE 36NE 42NE 50NE 700www.wackerneuson.com

Hydraulic hammersFor 0.7 to 15-tonne carrier vehicles.Compatibility listNE6 - NE700These hydraulic hammers havebeen developed with state-of-thearttechnologies and allow:- Optimum function in the presenceof large oil quantity, and with highdynamic pressure tolerance.- Maximum protection of the arms onthe carrier devices thanks to a verylow vibration level.- Easy installation on Wacker Neusoncompact excavators.1 Upper dampingReduces vibrations.2 Energy chamber withmembraneConstant supply; nomaintenance required.3 Compact soundproofingcasingPractical and robust.4 Automatic powerGuaranteed constant supply.5 ClipEasy and speedy disassemblyof the tools andchisel socket; easy lubrication.6 Only one holding pinReduced maintenance.7 A single, swimmingchisel socketEasy maintenance.8 Lower dampingLimited vibrations.TypeWeight (to)8030,9314041,32/1,4517031,61/1,7020031,85/1,9424041,85/1,9425032,53/2,6228Z32,57/2,6735033,40/3,5038Z33,58/3,6650Z34,9060035,50/5,9765035,5775Z37,3580037,63/8,25950310,2/9,21450414,5/15501s1,81701s2,31701sp2,36901s3,4901sp3,451101c4,351101cp4,4Engine power (kW) 17,7 17,7 17,7 17,7 17,7 27,1 17,9 35,4 27,1 35,4 51,1 51,1 51,1 51,1 74,9 74 27 34 39 50 63 63 63Auxiliary hydraulicpower (l/min) 21 34,5 42 43 43 44,4 52,2 62 70 95 105 105 73,5 79 115 126 42 62 62 85 85 85 85Working pressure (bar) 170 200 200 200 200 240 225 240 240 240 245 225 260 300 290 320/340 185 210 210 210 210 210 210Recommended NE 6hydraulic hammer NE 8 NE 8(according to weight and NE 12 NE 12 NE 12 NE 12hydraulic oil amount) NE 16 NE 16 NE 16 NE 16 NE 16NE 22 NE 22 NE 22 NE 22 NE 22NE 28 NE 28 NE 28NE 36 NE 36 NE 36 NE 36 NE 36 NE 36 NE 36 NE 36 NE 36NE 42 NE 42 NE 42 NE 42 NE 42NE 50 NE 700New Wacker Neuson product line.Wacker Neuson is expanding its product range and offering,together with its new partner Montabert, hydraulic hammersideally suited for its compact excavators. Montabert hasdeveloped this new product range in order to meet practicalneeds in an optimum manner: easy installation, flexibility,reduced maintenance, maximum productivity.Wacker Neuson hammers have been developed with many newpatents, especially for use with mini-excavators and compactexcavators. Nevertheless, the engineers did not sacrifice theadvantages that have rendered the trademark famous: adaptability,simplicity, performance and reliability.NE 50The Wacker Neuson NE 50: compactdimensions and highest performance inthe 500 kg class. Available for all applications(optionally) with central lubricationand underwater kit.ShovelIdeal design and stable;for time-saving removal ofcrushed materials.CompressorSubsurface solidification made easy.The compressor is simply fitted on theoperational hydraulic hammer.NE6 on 803The ideal combination for demolitionand renovation work in interior surfaces.Of course, with all technical featuresof big models.