Prowler VT950 Study Plans A4 - Schionning Designs

More documents

Recommendations

Info

10Kit Construction Sequence1.This design is initially assembled upside down. With this in mind, a level strong back is assembled that encompasses theflat deck area. Note the turn up in the bow sections. The strong back is built to reflect this.2.Once the flat decks are in position, the bulkheads are stood on station along the flat deck. Note the aft bulkheadsuspended beyond the flat deck area. Bulkheads must be appropriately braced so they are square and plumb.3.Once the bulkheads are in place and secured, forward webs and stiffeners are glued into position. The sole of theanchor locker is glued in place before the webs that are positioned between bulkheads 2 & 3. Note the web inbetween bulkhead 3 and 4, this is the area between the forward doubles and the anchor locker sole in purple.
114.Bridgedeck panel in place. To bend the panel over the forward ‘D’ sections and webs, kerf panel. The bulkheads are bracedand secured into position with a ‘spine’ and brace making sure they remain plumb, as before.5.The V section of the hull is glued in place. The next panels are then attached, forming the bottom hull chine which createsthe spray rails forward and the flat planing sections aft.6a.Explanation continued overleaf...
Page 1 and 2: STUDY PLANS
Page 3 and 4: 3Hello and thank you for showing in
Page 5 and 6: 5you have the choice to enjoy thesu
Page 7 and 8: 7OUTSIDE...Courtesy Paul Tyler
Page 9: PROFILE9
Page 13 and 14: 139.All internal furniture is insta
Page 15 and 16: 1515.The windows are inserted, and
Page 17 and 18: 17MATERIAL LISTDurakore Planks - 24
Page 19 and 20: 19THE BASICS ELEMENTS OF A GOODDESI
Page 21 and 22: 21CONSTRUCTION PLANSWHAT YOU GET WI

Prowler VT950 Study Plans A4 - Schionning Designs

Create successful ePaper yourself

Delete template?

Save as template?