ELECTRA-flo - V1.5x - 9-19-11.PMD - Air Monitor Corporation

ELECTRA-floSECTION 5 – OPERATION5.8 – FLOW CONFIGURATION (con't)1. While in Operator Menu, use UP or DN to scroll to: FlowConfiguration2. Press ENT to enter Flow Configuration menu. Display will indicate: Dimensional UnitsSelection3. Press ENT and display will indicate current setting of Units (U.S. or METRIC).4. Use UP or DN to change setting. Once desired setting is displayed, press ENT, new setting will be stored inmemory and display will return to Flow Configuration menu as in Step 2.Note: If user desires not to change the setting and return to the Flow Configuration menu, press ESC. Unit willremain programmed as it was originally.5. Use UP or DN to select remaining parameters to be changed within the Flow Configuration menu.6. Follow Step 4 to make any changes to parameters.See the following Units List for the available selections for the appropriate Flow Type.UNITS LISTfor VolumeUNIT OF MEASUREMENTActual cubic feet per minuteActual cubic feet per hourActual liters per secondActual liters per minuteActual cubic meters per hourStandard cubic feet per minuteStandard cubic feet per hourStandard liters per secondStandard liters per minuteStandard cubic meters per hourDISPLAYACFMACFHAl/sAl/mAm3/hSCFMSCFHSl/sSl/mSm3/h7. To return to the Main Menu, select Return to MAIN MENU in the Flow Configuration menu and press ENT.Air Monitor Corporation116-053-13.P65 (2/28/12)16ELECTRA-flo - IO&M Manual