Saturn OneTouch Installation Sheet - Schneider Electric

60TxM SeriesSaturn OneTouch Installation InstructionsFEATUREIntelligentIgnitionSequencingError Detectionand Self-CorrectionPower FailureRecoveryDESCRIPTIONSome loads require special handling to ensure proper start-up.Most lighting loads require a traditional “Soft Start”, whereassome Dimmable CFL loads may require a Kick-Start toensure the lamp will strike. The Universal Dimmer is able toautomatically detect the required start-up characteristics to suitthe connected load type.Soft Start: For all regular lighting loads.Kick Start: Selected for Dimmable CFL loads when needed.Note that the ignition sequencing algorithm will initially “search”for the best start-up method, and some unexpected rampingeffects can be observed at start-up. After three (3) successiveon/off operations the dimmer will “learn” the appropriate start-upprocedure. The dimmer start-up sequence will be reset aftera power failure, or after the removal and replacement of (all)lamps.The Saturn OneTouch Universal Dimmer is capable ofrecognising a number of error conditions where unstableoperation of the lamp may be detected. In many instances, theunit is capable of automatically correcting the problem.Typical error conditions include:• CFL lamp flicker / unstable operation• CFL lamp drop-outNote this facility is useful, but does not guarantee flawlessoperation. Such performance is a function of thedesign/construction of the lamp, and may vary betweenlamp manufacturers. In the case of unacceptable or unexpectedlamp behaviour, it is recommended to select anothermake/model of lamp.The Saturn OneTouch Universal Dimmer has on-boardnon-volatile memory, and is capable of storing the previousbrightness settings prior to loss of power.Power Loss DurationShort Duration PowerFailure (5 seconds)Power Failure Recovery StatusAutomatically restores the outputlevels set prior to the powerfailure.Power up in the OFF state.Clipsal by Schneider Electric9 of 20