COUPLINGS - DKSH.com

Safety Precautions (Please read prior to use)Please read carefully through the instruction manual and the technicalinformation for proper use and safety. In this manual, safety precautions areclassified by "DANGER" and "CAUTION".DANGERò When death or serious injury may result bymishandling¢ 2. Mounting precautionsDANGER ò Tighten bolts or screws completely.Depending on the tightening adjustment of bolt or screw,exceptionally dangerous situations such as productdamage or performance degradation could occur.Always use a calibrated torque wrench and clamp at thetightening torque specified by Miki Pulley.CAUTIONò When disability or only physical damage may resultby mishandlingDANGER ò Do not turn on the power of the equipment.Equipment use (atomic energy, aerospace, medical treatment,transportation,or various safety devices) that may result in serious bodily injury or loss oflife directly by mechanical failure or mishandling, careful examination isnecessary. Contact us for further information.The company has taken all possible measures to produce a qualityproduct; however, continuous rotational states when the clutch can notbe disengaged or coasting of the machine when the brakes went off isenvisioned as emergency. Please pay attention to safety measures incase anything goes wrong.¢ 1. Structural precautionsDANGER ò Use a safety cover.Touching the product during operation could cause injury.Place a safety cover to avoid any accident.Additionally, set up a safety mechanism for quick stop ofthe product when opening the cover.CAUTIONIt is very dangerous if the driving part starts by accidentwhile mounting the product. Be sure that the main powerof the equipment is turned off.ò Use the product within the specifiedmaximum permissible misalignment.The installation of the product must be performed withinthe specified maximum permissible error.Using the product with more than the maximumpermissible error could cause damage or adverse effecton the equipment.CAUTION ò Do not use any unspecified bolt or screw.DANGERò Do not use the product in the presence of fireand explosive hazards.Using a bolt or screw that is not specified by our companycould damage the product. Do not use any bolt or screwunspecified.Do not use the product near flammable liquids or in thepresence of gas and other explosive air particles.CAUTION ò Wear protective equipment.DANGER ò Set up a safety mechanismTo avoid any injury by stripping, spring pin or keyway,make sure to wear protective equipment such as safetyglasses or gloves.SafetyPrecautionsThe driven and driving sides could be completelydetached when the product is damaged.Set up a safety mechanism such as a safety brake toavoid any danger.CAUTIONò Carry and mount the product by using ahoist.Lifting of a heavy weight could cause back injury.Use a hoist when carrying or mounting the product.96