Transmission Test Systems - teamtechnik Maschinen und Anlagen ...

3D analysis of weak points Analysis of time signals All readings at a glance
Optimum
communications
As an option, the teamtechnik
software, TEAMSOFT, or test
stand software on
controls the basic test sequence
and communication with the
TCUs.
_ Shifting and teaching of
automatic transmissions.
_ Communication with automatic
transmission control
units or other transmission
actuators.
_ Interfaces to CAN,
KW2000 etc.
Objective
noise analysis
This is done with structureborne
noise sensors, microphones
and/or laser vibrometers.
A fault analysis system
accurately identifies defect
components; e.g. with Fast
Fourier Transformation (FFT),
order analyses, RMS value
calculations and crest factors
avoiding lengthy and elaborate
searches for faults on the
transmission.
teamtechnik transmission test technology for:
� Manual transmissions
� Automated manual transmissions
� Infinitely variable transmissions CVT/IVT
� Double clutch transmissions
Objective
shift force analysis
Shift robots can be integrated
in any teamtechnik test stand.
The measurements (force,
travel and angle) are transmitted
via an interface. An
established software carries
out the analysis.
Accurate measurement
technology
teamtechnik's core competences
include hydraulic
measurement and test technology.
It has been used with
great success for many years
in automatic, CVT and ASG
transmission test stands.
Noise [dB]
Torque [Nm]
Speed [rpm]
Pressure [Pa]
Throughput [l/min]
Force [N]
Temperature [° C]
Angle [°]
� Automatic transmissions
� RDM transmissions
� PTU transmissions