Soldering Irons and Tips

AccessoryMiscellaneousOrder No.DescriptionDesoldering WiresThe desoldering wire consists of a copper net with flux F-SW32.The special surface treatment allows efficient solder removal.005 13 010 99 Desoldering wire 1,6 m coil, width 1,5 mm005 13 011 99 Desoldering wire 1,6 m coil, width 2 mm005 13 012 99 Desoldering wire 1,6 m coil, width 2,5 mm005 13 028 99 Desoldering wire 15 m coil, width 2,5 mm005 13 026 99 Desoldering wire 30 m coil, width 1,5 mm005 13 027 99 Desoldering wire 30 m coil, width 2 mmOrder No.Description005 13 831 99 Flux SetLiquid flux, 100 ml, type 1.1.3.A (F-SW32),EN29 454. Remaining flux is not corrosive.NEWOrder No.Description005 13 837 99 BM 5000 FluxLiquid RMA flux with brush, 15 mlOrder No.SM15748BKDescriptionSpot-MaskThe Spot-Mask is a material to protect connectors of PCBsfrom tinning during the reflow process. For manual reworkthe Spot-Mask is easily applied and removed. Mechanicalfixture after 6 min, hardened after 2– 3 hours by 20°C,1 hour by 95°C. Stockable 12 months. Suitable for lead freeapplications.Extension Cords for Soldering IronsOrder No.Description005 32 099 99 Extension cord 3-wire, 4 m for TCP S, T 3001005 25 098 99 Extension cord 5-wire, 4 m, up to 50 W,for LR 21, MLR 21, WTA 50005 26 098 99 Extension cord 7-wire, 3 m, up to 80 W,for WMP, WSP 80, LR 82184 Accessory