CMD-III/16:1786 - BIS
CMD-III/16:1786 - BIS
CMD-III/16:1786 - BIS
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TEST DETAILSSr. RequirementsNo.Test MethodClauseReferenceSTI/<strong>1786</strong>/R-1/9Sept. 2008IS <strong>1786</strong>: 2008HIGH STRENGTH DEFORMED STEEL BARS AND WIRESFOR CONCRETE REINFORCEMENTTABLE 1 LEVELS OF CONTROL(Clause 5 of the Scheme of Testing & Inspection)LEVELS OF CONTROLNo. of Lot FrequencySample Sizes1 Chemical Composition 4.2 IS <strong>1786</strong>:2008Relevant part of3 40tonnesEach ConsignmentIS 228or partthereof2. Freedom from defects. 4.3 IS <strong>1786</strong>:2008 Adequate inspection toensure each item to befree from surface defects.3. Tensile test. 9.2 IS:<strong>1786</strong>-2008 3 For cast above Each lot.100 tonnesIS:<strong>16</strong>082 For cast below4. Bend Test 9.3 IS:<strong>1786</strong>-2008IS 1599100 tonnes-do- -do-5. Rebend Test 9.4 IS:<strong>1786</strong>-2008 -do- -do-RemarksNo chemical analysis is required if ingot /billetsare accompanied by test certificate or ISI marked.(Ref. 5.3.3.1 of STI)6. Deformation &Surface characteristics5.2 IS:<strong>1786</strong>-2008 Every day‘sproductionEach size rolled.IS <strong>1786</strong>: 2008STI/<strong>1786</strong>/R-1/9Sept. 2008
Change language