Wood Hinged Patio Door - Weather Shield
Wood Hinged Patio Door - Weather Shield
Wood Hinged Patio Door - Weather Shield
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Recommended Finishing Instructions (cont.)<strong>Door</strong> InsertsAll active and removable door inserts, whethersliding or hinged, must be removed from thedoor frame after installation so they can beproperly sealed (FIGURE 1).Both clad and wood door units have bare woodon the top and bottom of the inserts. Paint orvarnish these areas as you would all of the otherexposed exterior wood. Follow proceduresoutlined in “Recommended FinishingInstructions” on previous page.Do not get paint, varnish, orsealer in the rollers on thebottom of sliding inserts. Rollers must bekept clean so they will rotate freely.Keep all sealers off weatherstripor bottom sweeps.FIGURE 1SEAL BARE WOODON TOP OF INSERT.SEAL BOTH STILES & RAIL.ACTIVE INSERTREMOVEACTIVE INSERTFROM FRAMESEAL BARE WOODON BOTTOM OF INSERT.SEAL BOTH STILES & RAIL.DO NOT GET SEALER IN ROLLERSOR ON WEATHER STRIP.12
Change language