Spa Net SV series User Manual - West Coast Spas

More documents

Recommendations

Info

Air Blower OperationBlower button functionsBlower ButtonThe blower button is used to toggle the air blower ON/OFF and allow adjustment of the blowerspeed. The selected speed is saved and will be restored the next time the blower is turned on, forfuture ON/OFF use. Two modes of operation are provided:Pressonce for variable speed modeVariable Speed ModeIn this mode the blower speed can be manually adjusted to one of five (5) x different speedsettings.Pressbutton once to activate blower in variable speed modeDisplay will flash VARI mode then present b.SPD (blower speed) adjustment menu(refer illustration aside)Press or buttons to increase or decrease the blower speed(note: bar graph segments adjust with blower speed)Pressto save and exit menuPressPressbutton to exit menu or wait for 10 second display time outbutton a second time to turn blower offPressagain to turn blower OFFRamping ModeIn this mode the blower speed gradually increases and decreases through the blower speed rangein a ramping manner.Pressbutton twice to activate blower in ramping modePresstwice for ramping modeDisplay will flash RAMP mode and blower operates in a ramping mannerPressbutton a second time to turn blower offIMPORTANT NOTESPressagain to turn blower OFF• When blower is turned on it runs at maximum speed for 3-4 seconds before changing topreset speed (this is normal)• If left running, blower will turn off after a 30 minute time out period. Time out period can beadjusted from 10 to 60 minutes via the Setup Menu item T.OUT (refer page 21).SV Series Spa Controls 15
Spa Light Operation (SV2.T Models)Multi-colour LED lighting effect modesLight ButtonPressto turn light(s) ONThe light button is used to toggle the spa light(s) ON / OFF and to access the light modemenus. The features that can be adjusted are the light colour, light effect mode, lighteffect transition speed, and light brightness. All light settings are saved and will berestored the next time the light is turned ON, for future ON / OFF use.Pressbutton to turn light(s) on / offWhen light is turned on keypad will display light mode menu showing currentlight mode in use (refer illustration aside)Press or button to navigate through choice of light modes:WHTEUCLRFADESTEPWhite LightUser ColourFade EffectStep EffectPressbutton to confirm light mode selectionDependant on light mode selected the keypad will display one of three lightmode option screens (refer aside)L.BRTCL:xxL.SPDLight BrightnessUser Colour Number (CL:00 - CL:20)Light Effect Transition SpeedPress or button to adjust each settingPressbutton to save each setting and move to the next settingPressto confirm & saveIMPORTANT NOTES• If left switched on, light(s) will turn off 15 minutes after the expiry of thepump/blower time out periods.SV Series Spa Controls 16
Page 4 and 5: SET THE DATE AND TIMEBEFORE USING T
Page 6 and 7: SV2.T Keypad OverviewButtons and in
Page 8 and 9: SV4.T Keypad OverviewButtons and in
Page 10: Display ModesWater Temperate / Set
Page 14 and 15: Heating Control & ProtectionFast He
Page 20 and 21: Special Function ButtonsModel speci
Page 22 and 23: Setup MenuHow to program advanced c
Page 24 and 25: Setup MenuSetup menu item detailsH.
Page 26 and 27: [P.SAV] PowerSAVE Menu (off-peak)Ho
Page 28 and 29: Error Codes & Troubleshooting Probl
Page 30: Contact UsSpa Net Head Office Conta

Spa Net SV series User Manual - West Coast Spas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?