maintenance - Polaris

FEATURES AND CONTROLSInstrument ClusterHigh water pressure maydamage components. Wash thevehicle by hand or with agarden hose using mild soap.Do not use alcohol to clean theinstrument cluster. Do notallow insect sprays to contactthe lens.SpeedometerThe speedometer displaysvehicle speed in either milesper hour (MPH) or kilometersper hour (km/h). See page 26.Indicator LampsLamp Indicates ConditionVehicle SpeedSpeedometerRiderInformationCenterIndicatorLampsMODEButtonWhen standard mode is selected, speed displays in miles per hour.When metric mode is selected, speed displays in kilometers per hour.Over TemperatureEPS WarningNeutralHigh BeamHelmet/Seat BeltCheck EngineThis lamp illuminates to indicate an overheated engine. If theindicator flashes, the overheating condition remains, and the systemwill automatically reduce engine power.This indicator illuminates briefly when the key is turned to the ONposition. If the light remains on, the EPS system is inoperative. Seeyour authorized POLARIS dealer for service.This lamp illuminates when the transmission is in neutral and theignition key is in the ON position.This lamp illuminates when the headlamp switch is set to high beam.This lamp flashes for several seconds when the key is turned to theON position. The lamp is a reminder to the operator to ensure allriders are wearing helmets and seat belts before operating.This indicator appears if an EFI-related fault occurs. Do not operatethe vehicle if this warning appears. Serious engine damage couldresult. See your dealer.24