TWIST-LOCK® and HUBBELLOCK® Devices - Hubbell Online ...
TWIST-LOCK® and HUBBELLOCK® Devices - Hubbell Online ...
TWIST-LOCK® and HUBBELLOCK® Devices - Hubbell Online ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section B<strong>TWIST</strong>-LOCK ® <strong>and</strong>HUBBELLOCK ® <strong>Devices</strong>IndexRating Type Page Number15A 125V 2P 2W, Midget Twist-Lock Non-Grounding <strong>Devices</strong> B-215A 125V 2P 2W, Twist-Lock Non-Grounding <strong>Devices</strong> B-320A 250V 2P 2W, Twist-Lock Non-Grounding <strong>Devices</strong> B-4Features <strong>and</strong> Benefits Midget Twist-Lock <strong>Devices</strong> B-515A 125V 2P 3W, Midget Twist-Lock Grounding <strong>Devices</strong> B-6–7Features <strong>and</strong> Benefits 15A Twist-Lock <strong>Devices</strong> B-915A 125V, 250V <strong>and</strong> 277V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-10–12Features <strong>and</strong> Benefits 20A <strong>and</strong> 30A Twist-Lock <strong>Devices</strong> B-14–15Features <strong>and</strong> Benefits 50A Twist-Lock <strong>Devices</strong> B-16Features <strong>and</strong> Benefits 20A <strong>and</strong> 30A Watertight Safety-Shroud Twist-Lock <strong>Devices</strong> B-17–18Features <strong>and</strong> Benefits 20A <strong>and</strong> 30A Safety-Shroud Twist-Lock <strong>Devices</strong> B-19Features <strong>and</strong> Benefits CIRCUIT-LOCK Unfused Safety-Shroud Mechanical Interlock B-20Compatibility Chart Twist-Lock <strong>Devices</strong> B-2120A 125V, 250V <strong>and</strong> 277V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-22–2420A 125V, 250V <strong>and</strong> 277V AC 2P 3W, Valise ® Twist-Lock Grounding <strong>Devices</strong> B-2520A 347V, 480V AC <strong>and</strong> 600V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-2630A 125V, 250V <strong>and</strong> 277V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-27–2930A 125V, <strong>and</strong> 250V 2P 3W, Valise Twist-Lock Grounding <strong>Devices</strong> B-3030A 480V AC <strong>and</strong> 600V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-3150A 125V, 250V <strong>and</strong> 480V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-3250A 250V DC <strong>and</strong> 600V AC 2P 3W, Twist-Lock Grounding <strong>Devices</strong> B-3315A 125/250V 3P 3W, Midget Twist-Lock Non-Grounding <strong>Devices</strong> B-34–3520 <strong>and</strong> 30A 125/250V 3P 3W, Twist-Lock Non-Grounding <strong>Devices</strong> B-3620A 125/250V, 3Ø 250V AC<strong>and</strong> 3Ø 480V AC3P 4W, Twist-Lock Grounding <strong>Devices</strong> B-37–3930A 125/250V <strong>and</strong> 3Ø 250V AC 3P 4W, Twist-Lock Grounding <strong>Devices</strong> B-40–4230A 3Ø 480V AC <strong>and</strong> 3Ø 600V AC 3P 4W, Twist-Lock Grounding <strong>Devices</strong> B-43–4550A 125/250V, 3Ø 250V AC,<strong>and</strong> 3Ø 480V AC3P 4W, Twist-Lock Grounding <strong>Devices</strong> B-4650A 600V AC, 250V DC 3P 4W, Twist-Lock Grounding <strong>Devices</strong> B-4720A 3Ø Y 120/208V AC,277/480V AC <strong>and</strong> 347/600V AC4P 4W, Twist-Lock Non-Grounding <strong>Devices</strong> B-4830A 3Ø Y 120/208V AC,277/480V AC <strong>and</strong> 347/600V AC4P 4W, Twist-Lock Non-Grounding <strong>Devices</strong> B-4920A <strong>and</strong> 30A 3Ø Y 120/208V AC 4P 4W, Twist-Lock Non-NEMA, Non-Grounding <strong>Devices</strong> B-5020A 3Ø Y 120/208V AC,277/480V AC <strong>and</strong> 347/600V AC4P 5W, Twist-Lock Grounding <strong>Devices</strong> B-51–5330A 3Ø Y 120/208V AC,277/480V AC <strong>and</strong> 347/600V AC4P 5W, Twist-Lock Grounding Device B-54–5620A 250V, 10A 600V AC 4P 5W, Twist-Lock Non-NEMA, Grounding <strong>Devices</strong> B-5730A 250V, 600V AC <strong>and</strong>20A 3Ø Y 120/208V AC 400 Hz4P 5W, Variload ® Twist-Lock Grounding <strong>Devices</strong> B-5810A, 15A, 20A, <strong>and</strong> 30A 125V <strong>and</strong> 250V Non-NEMA, Not UL Listed <strong>Devices</strong> B-59–61Switched Twist-Lock <strong>and</strong> <strong>Hubbell</strong>ock EnclosuresB-62–63Switched Safety-Shroud Twist-Lock EnclosureB-64–65AccessoriesB-66–71Back Boxes for Watertight Receptacles B-72Add-A-Shroud B-7350 Amp Twist-Lock Accessories B-74Features <strong>and</strong> Benefits <strong>Hubbell</strong>ock <strong>Devices</strong> B-7520A 125V 2P 3W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-7630A 600V AC, 20A 250V DC 3P 4W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-7730A 480V AC 3P 4W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-7860A 600V AC 3P 4W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-7930A 600V AC, 20A 250V DC 4P 5W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-8060A 600V AC 4P 5W, <strong>Hubbell</strong>ock Grounding <strong>Devices</strong> B-8120A 125V AC or DC or 10A 250V DC<strong>and</strong> 480V AC2P 3W, <strong>Hubbell</strong>ock Grounding Not UL Listed <strong>Devices</strong> B-82Technical InformationB-83–88Locking <strong>Devices</strong> IndexDimensions in Inches (mm)www.hubbell-wiring.com
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 2 Wire Non-Grounding15 Ampere, 125 VoltsReceptacles, INSULGRIP ® Plug, Connector Body,Flanged Inlet <strong>and</strong> Flanged ReceptaclesReceptaclesDescriptionCatalog NumbersDuplex, flush, black phenolic. HBL7540 –Single, flush, black phenolic. HBL7535 –Single, panel mount, 1 15 /16” (49.2) HBL7498 –centers, black phenolic.Insulgrip PlugIP20 SUITABILITYDescription Cord Dia. Catalog NumberBlack <strong>and</strong> white nylon, polarized. .230”-.720” – HBL7545CMultiple drive screws. (5.8-18.3)Insulgrip Connector BodyIP20 SUITABILITYDescription Cord Dia. Catalog NumberBlack <strong>and</strong> white nylon. .230”-.720” HBL7506C –Multiple drive screws. (5.8-18.3)Insulgrip Flanged InletDescriptionCatalog NumberNylon casing, polarized, backwired, – HBL7524CMultiple drive screws.Flanged ReceptaclesDescriptionCatalog NumbersInsulgrip nylon casing, backwired. HBL7526C –Multiple drive screws.Metal flange, stainless steel casing, HBL7526 –black phenolic, exposed terminals.Notes: Only receptacles <strong>and</strong> plugs are HP rated.HP ratings are AC only.See pages B-66 <strong>and</strong> B-67 for accessories..16"(4.1)DIA.2.56"(65.0)2.19"(55.6)HBL7524C1.72"(43.7)1.69"(42.9).16"(4.1)DIA.2.19"(55.6)2.56"(65.0)1.72"(43.7)WNEMA L1-15R15A 125VUL Listed0.5 HP1.69"(42.9)WNEMA L1-15P15A 125VUL Listed0.5 HP3.28"(83.3)3.28" 1.39"(83.3) (60.5)2.38"(35.3)1.94" 1.39"(49.3)(35.3)1.53"(38.9)#6-32TAP1.53"(38.8) 1.11"(28.2)#8-32TAP#6-32 TAPHBL7540HBL75351.39"(35.3)HBL7498HBL7545C2.78"(70.6)1.33"(33.8)1.91"(48.5)HBL7506C1.00"(25.4)1.19"(30.2)1.19"(30.2)1.00"(25.4)1.63"(41.4)1.00"(25.4)1.63"(41.4)1.19"(30.2)1.53"(38.9)2.75"(69.9)1.41"(35.8)Locking <strong>Devices</strong> 2P 2W, 15A, 125VDimensions in Inches (mm)www.hubbell-wiring.comB-3
2P 2W, 20A, 250V Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 2 Wire Non-Grounding20 Ampere, 250 VoltsReceptacles, INSULGRIP ® Plug, Connector BodyFlanged Inlet, Flanged Receptacles1.53"(38.9)2.09"(53.1).16"(4.1)DIA..16"(4.1)DIA.1.30"(33.0)1.11"(28.2)1.41"(35.8)HBL7210B2.78"(70.6)HBL7101C2.56"(65.0)2.19"(55.6)1.69"(42.9)HBL8815C2.56"(65.0)1.69"(42.9)HBL8809C1.88"(47.8)1.42"(36.1)HBL32261.39"(35.3) (60.5) 2.38"(83.3)3.28"#6-32 TAP1.91"(48.5)HBL7102C1.72"(43.7)1.72"(43.7)1.83"(46.4)2.19"(55.6)1.53"(38.9)1.41"(35.8).16"(4.1)DIA.ReceptaclesDescriptionCatalog NumbersSingle, black phenolic. HBL7210B –Single, mounted on 4” (101.6) HBL7217B –round box cover, black phenolic.Insulgrip PlugDescription Cord Dia. Catalog NumberBlack <strong>and</strong> white nylon, polarized. .220”-.720” – HBL7102CMultiple drive screws. (5.6-18.3)Insulgrip Connector BodyDescription Cord Dia. Catalog NumberBlack <strong>and</strong> white nylon. .220”-.720” HBL7101C –Multiple drive screws. (5.6-18.3)Insulgrip Flanged InletDescriptionCatalog NumberNylon casing, back wired, polarized. – HBL8815CMultiple drive screws.Flanged ReceptaclesNEMA L2-20R20A 250VUL Listed2 HPNEMA L2-20P20A 250VUL Listed2 HPDescriptionCatalog NumbersInsulgrip nylon casing, back wired. HBL8809C –Multiple drive screws.Metal flange, stainless steel casing, HBL3226 –black phenolic, exposed terminals.Notes: Only receptacles <strong>and</strong> plugs are HP rated.Horsepower ratings listed above are AC only.See pages B-66 <strong>and</strong> B-67 for accessories.B-4 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Midget <strong>TWIST</strong>-LOCK <strong>Devices</strong>Assembly screws havemultiple drive heads forscrewdriver versatility. Onlytwo assembly screws areneeded to close this device,make the wire terminations<strong>and</strong> retain the cord.Powerful, cord-gripping jawsdesigned to eliminate conductor slip<strong>and</strong> strain on terminals.<strong>Hubbell</strong>’s Valise ® insulation displacement terminal forMidget Twist-Lock plugs <strong>and</strong> connector bodies are theright choice for economy, wiring speed <strong>and</strong> long life.Totally insulated body adds extra measure of safety.Abuse resistant nylon housing.Patented locking lugs interlock the two sectionstogether when the device is assembled providing asecure assembly in abusive environment.Nylon webs join two sections together which makesassembly of the device quick <strong>and</strong> easy.The insulation displacement terminal reduces thetime required for wire preparation <strong>and</strong> providesuniformity in the quality of termination.“TURN & PULL” marking is highlyvisible, reducing possible damagesto equipment by attemptingdisconnection prior to unlocking.Locking <strong>Devices</strong> Features <strong>and</strong> BenefitsDimensions in Inches (mm)www.hubbell-wiring.comB-5
2P 3W, 15A, 125V Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding15 Ampere, 125 VoltsMidget <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>1.17"(29.7)1.00"(25.4).16"(4.1)DIA.1.19"(30.2)2.06"(52.3)1.75"(44.5)1.14"(29.0)HBL7596N2.06"(52.3)1.75"(44.5)1.17"(29.7)HBL75962.06"(52.3)1.75"(44.5)1.17"(29.7)HBL7598HBL7594V2.00"(50.8)1.61"(40.9)1.59"(40.4)HBL7594.97"(24.6)1.25"(31.8).15"(3.8)DIA..16"(4.1)DIA.1.13"(28.7)Flanged ReceptaclesDescriptionCatalog NumbersExposed terminals, black nylon flange. HBL7596N –Exposed terminals, stainless steel flange. HBL7596 –Covered terminals, stainless steel flange, HBL7598 –accepts cord .500” (12.7) in dia.Male Plugs IP20 SUITABILITYDescription Cord Dia. Catalog NumbersValise ® male plug, black nylon, insulation .300”-.430” – HBL7594Vdisplacement terminals. (7.6-10.9)Black nylon cover, phenolic body, .281”-.421” – HBL7594multiple drive screw terminals. (7.1-10.7)Angle plug, black nylon cover, phenolic .335”-.421” – HBL7570body, multiple drive screw terminals. (8.5-10.7)Weatherproof Accessory IP55** SUITABILITYDescriptionCatalog NumberSeal-Tite ® cover, black elastomer, for use with a HBL7594V plug HBL7495V** *when used with a HBL7593V connector body or a HBL7593Vconnector body when used with a flanged inlet.Notes: These devices are not interchangeable with any other devices in this catalog.All male ground pins are sleeves <strong>and</strong> female device grounds are split pin.**IP55 Suitability when installed <strong>and</strong> used properly with plug <strong>and</strong> connectorbody combination.* Not UL Listed..86"(21.8)1.69"(42.9)1.17"(29.7)HBL7570GRWNEMA ML-2R15A 125VHBL7495VWNEMA ML-2P15A 125VGRB-6 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding15 Ampere, 125 VoltsMidget <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Connector BodiesIP20 SUITABILITYDescription Cord Dia. Catalog NumbersValise ® connector body, black nylon, .300”-.430” HBL7593V –insulation displacement terminals. (7.6-10.9)Black nylon cover, phenolic body, .281”-.421” HBL7593 –screw terminals. (7.1-10.7)Angle connector body, black nylon cover, .335”-.421” HBL7571 –phenolic body, screw terminals. (8.5-10.7)Flanged InletsDescriptionCatalog NumbersExposed terminals, black nylon flange. – HBL7595NExposed terminals, stainless steel flange. – HBL7595Covered terminals, stainless steel flange, – HBL7551accepts cord .500” (12.7) dia.Weatherproof AccessoriesIP55** SUITABILITYDescriptionCatalog NumbersSeal-Tite ® cover, black elastomer, for use with a HBL7593V HBL7440V** *connector body <strong>and</strong> a combination of HBL7594V plug <strong>and</strong>HBL7495V cover.Closure cover for use with HBL7595 or HBL7595N. HBL4889 *Notes: These devices are not interchangeable with any other devices in this catalog.All male ground pins are sleeves <strong>and</strong> female device grounds are split pin.**IP55 Suitability when installed <strong>and</strong> used properly with plug cover <strong>and</strong>connector body combination.* Not UL Listed.HBL7440VGRHBL4889WNEMA ML-2R15A 125VWNEMA ML-2P15A 125VGR1.13"(28.7)1.28"(32.5)1.00"(25.4).16"(4.1)DIA.1.98"(50.4)HBL7593V2.42"(61.5)HBL75931.69"(42.9)1.17"(29.7)HBL75712.06"(52.3)1.75"(44.5)1.28"(32.5)HBL7595N2.06"(52.3)1.75"(44.5)1.22"(31.0)HBL7595.15"(3.8)DIA.1.00"(25.4)1.19"(30.2)1.17"(29.7)Locking <strong>Devices</strong> 2P 3W, 15A, 125VDimensions in Inches (mm)www.hubbell-wiring.comB-7
Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>INSULGRIP ® 15 Ampere Plugs <strong>and</strong> Connector BodiesFeaturing Integral VARI-SIZE ® Cord GripIndividually molded face foreach blade configuration keepsdebris out of plug interior.Roomy wiring chamber providesample space for wiring.Individual wiring terminals arecompletely enclosed in theirown separate chambers.Powerful, offsetting cord grips clampon individual conductors <strong>and</strong> outer cordjacket to prevent strain on terminals.Ribbed nylon housing is impact<strong>and</strong> chemical resistant.Beveled housing prevents snaggingwhen dragged across uneven surfaces.Integral VARI-SIZE ® insert adjusts to awide range of cord sizes: .230”-.720”(5.8-18.3).VARI-SIZE pointer set to “smaller thangauge” position. Cord diameter rangeis .230”-.360” (5.8-9.0). Acceptsslotted <strong>and</strong> Phillips head drivers.Catalog number is visible on thedevice while in use for easyidentification.Multiple drive screw heads providescrewdriver versatility. Pocketedrecess for cord grip screws detersslippage of the screwdriver.Transparent angled wiring entranceholes permit “straight in” conductorinsertion.Powerful offsetting cord grips clampon individual conductors <strong>and</strong> outercord jacket to prevent strain onterminations.Locking <strong>Devices</strong> Features <strong>and</strong> BenefitsDimensions in Inches (mm)www.hubbell-wiring.comB-9
2P 3W, 15A, 125V, 250V <strong>and</strong> 277V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding15 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACDuplex <strong>and</strong> Single Receptacles3.28"(83.3)2.38"(60.5) 1.38"(35.1)1.94" 1.75" 1.38"(49.3)(44.5)(35.1)1.70"(43.2)HBL47001.27"(32.3)HBL47101.27"(32.3)HBL47132.735"(69.5)3.28"(83.3)1.42"(36.1)Duplex Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersFlush, brown RTP face. HBL4700* HBL4550* HBL4750*Flush, ivory RTP face. HBL4700I* – –Fed Spec WC596Special Purpose Duplex ReceptaclesBack <strong>and</strong> Side WiredDescriptionCatalog NumbersIsolated ground, flush, orange RTP face. IG4700A* IG4550A* –Corrosion resistant, yellow RTP face. HBL47CM00* – –Fed Spec WC596Single Receptacle,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersFlush, black nylon face. HBL4710 HBL4560 HBL4760Special Purpose Single Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersIsolated ground, flush, orange nylon face. IG4710 IG4560Single, black nylon face mounted on a HBL4711 – HBL47614” (101.6) round box cover.Panel mount, black nylon face, side wired HBL4713 HBL4563 HBL4763only, 1.75” or 1.937” (44.5 or 49.2)mounting centers.Notes: HP ratings are AC only.RTP is an abbreviation for reinforced thermoplastic polyester.See Section J for full line of isolated ground devices.See pages B-66 <strong>and</strong> B-67 for accessories.*Supplied with break-off tabs for split circuit wiring.GWNEMA L5-15R15A 125VUL/CSA0.5 HPGYXNEMA L6-15R15A 250VUL/CSA1.5 HPGWNEMA L7-15R15A 277V ACUL/CSA2 HPB-10 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding15 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACPlugs <strong>and</strong> Connector BodiesPlugsIP20SUITABILITYDescription Cord Dia. Catalog NumbersInsulgrip ® plug, .230”-.720” HBL4720C HBL4570C HBL4770Cblack <strong>and</strong> white nylon. (5.8-18.3)Multiple drive screws.Fed Spec WC596Insulgrip plug, .230”-.720” HBL47CM20C HBL45CM70C HBL47CM70Ccorrosion resistant, (5.8-18.3)yellow <strong>and</strong> white nylon.Multiple drive screws.Fed Spec WC596Elastogrip ® plug, yellow 300”-.655” HBL2447 – –elastomer, dust tight. (7.6-16.6)Elastogrip plug, yellow 300”-.655” HBL24W47* – –elastomer, water/dust tight.(7.6-16.6)Valise ® plug, .220”-.660” HBL4723VY HBL4573VY HBL4773VYyellow nylon. (5.6-16.8)Valise plug, .220”-.660” HBL4723VBK HBL4573VBK HBL4773VBKblack nylon. (5.6-16.8)Note: *Watertight plug IP55 suitability when installed <strong>and</strong> used with watertight connectorbody.Connector BodiesDescription Cord Dia. Catalog NumbersInsulgrip connector .230”-.720” HBL4729C HBL4579C HBL4779Cbody, black <strong>and</strong> white nylon.(5.8-18.3)Multiple drive screws.Insulgrip connector body, .230”-.720” HBL47CM29C HBL45CM79C HBL47CM79Ccorrosion resistant, (5.8-18.3)yellow <strong>and</strong> white nylon.Multiple drive screws.Elastogrip connector body, .300”-.655” HBL2547 – –yellow elastomer, dust tight. (7.6-16.6)Elastogrip connector body, .300”-.655” HBL25W47* – –yellow elastomer, (7.6-16.6)water/dust tight.Valise connector body, .220”-.660” HBL4729VY HBL4579VY HBL4779VYyellow nylon. (5.6-16.8)Valise connector body, .220”-.660” HBL4729VBK HBL4579VBK HBL4779VBKblack nylon. (5.6-16.8)Notes: See pages B-66 <strong>and</strong> B-67 for accessories.HP ratings are AC only.Only plugs are HP rated.For technical information on Insulgrip devices see page B-83.*Watertight connector body IP55 suitability when closure plug inserted or wheninstalled <strong>and</strong> used properly with watertight plug.WGNEMA L5-15P15A 125VUL/CSA0.5 HPGWNEMA L5-15R15A 125VUL/CSANEMA L6-15P15A 250VUL/CSA1.5 HPGXYYGXNEMA L6-15R15A 250VUL/CSAWNEMA L7-15P15A 277V ACUL/CSA2 HPGGWNEMA L7-15R15A 277V ACUL/CSA1.56"(39.6)1.53"(38.9)1.50"(38.1)HBL4729CHBL25W472.59"(65.8)HBL4720CHBL24W471.88"(47.8)HBL4723VY2.78"(70.6)1.75"(44.5)1.91"(48.5)HBL4729VY2.63"(66.8)4.00"(101.6)1.50"(38.1)1.53"(38.9)1.41"(35.8)Locking <strong>Devices</strong> 2P 3W, 15A, 125V, 250V <strong>and</strong> 277V ACDimensions in Inches (mm)www.hubbell-wiring.comB-11
2P 3W, 15A, 125V, 250V <strong>and</strong> 277V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding15 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACAngle <strong>Devices</strong>, Flanged Inlets, <strong>and</strong> Flanged Receptacles.16"(4.1)DIA..16"(4.1)DIA..16"(4.1)DIA..16"(4.1)DIA.1.22"(30.9)1.53"(38.9)HBL4720CA2.56"(65.0)2.19"(55.6)1.69"(42.9)HBL4715C2.31"(58.7)1.94"(49.3)1.50"(38.1)HBL47152.56"(52.3)2.19"(55.6)1.69"(42.9)HBL4716C2.31"(58.7)1.94"(49.3)1.50"(38.1)HBL47162.11"(53.6)1.72"(43.7)1.75"(44.5)1.36"(34.5)1.72"(43.7)1.75"(44.5)1.09"(27.7)IP20 SUITABILITYAngle PlugsDescription Cord Dia. Catalog NumbersInsulgrip ® plug, .325”-.655” HBL4720CA HBL4570CA HBL4770CA8 position angle, (8.3-16.6)black <strong>and</strong> white nylon.Multiple drive screws.IP20 SUITABILITYAngle Connector BodyDescription Cord Dia. Catalog NumberInsulgrip connector body, .325”-.655” HBL4729CA – –8 position angle, (8.3-16.6)black <strong>and</strong> white nylon.Multiple drive screws.Flanged ReceptaclesDescriptionCatalog NumbersInsulgrip flanged receptacle, HBL4715C HBL4585C HBL4785Cnylon casing, back wired.Stainless steel casing, HBL4715 HBL4585 HBL4785brown phenolic.Corrosion resistant, stainless steel HBL47CM15 – –casing, yellow melamine.Flanged InletsDescriptionCatalog NumbersInsulgrip flanged inlet, HBL4716C HBL4586C HBL4786Cnylon casing, back wired.Stainless steel casing, HBL4716* HBL4586* HBL4786*brown phenolic.Corrosion resistant, stainless steel HBL47CM16* – –casing, yellow melamine.Notes: See pages B-66 <strong>and</strong> B-67 for accessories.Only plugs are HP rated.HP ratings are AC only.*These flanged inlets will not accept Valise ® connector bodies.WGNEMA L5-15P15A 125VUL/CSA0.5 HPGNEMA L5-15R15A 125VUL/CSAGWNEMA L5-15R15A 125VUL/CSAWWGNEMA L5-15P15A 125VUL/CSAXGYNEMA L6-15P15A 250VUL/CSA1.5 HPGYXNEMA L6-15R15A 250VUL/CSAGNEMA L6-15R15A 250VUL/CSAXYXGYNEMA L6-15P15A 250VUL/CSAWGNEMA L7-15P15A 277V ACUL/CSA2 HPGWNEMA L7-15R15A 277V ACUL/CSAGWNEMA L7-15R15A 277V ACUL/CSAWGNEMA L7-15P15A 277V ACUL/CSAB-12 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Locking <strong>Devices</strong>
Features <strong>and</strong> Benefits Locking <strong>Devices</strong>The St<strong>and</strong>ard for Locking ReceptaclesFeatures <strong>and</strong> BenefitsBoss diameter is 1.562" on 20 <strong>and</strong> 30Adevices for simplifying installation <strong>and</strong>accessory selection.Glass-Reinforcedthermoplastic polyesterbase (RTP) has thedesirable characteristicsof a thermoset material,including heat, flameresistance <strong>and</strong> dimensionalstability. The impactresistance it provides,however, is much greaterthan that of a thermoset.One-piece contact with longspring arm (low stress) <strong>and</strong>oxide cutting nibs: prevents stress<strong>and</strong> overheating associatedwith riveted contact <strong>and</strong>short spring arms.High-impact, abuse-resistant nylon face.Face color coding by voltage facilitateslocating <strong>and</strong> mating of proper devices.On the high-impact nylon face of each <strong>Hubbell</strong>Twist-Lock ® receptacle is a ring of color. Keyed toan internationally recognized color coding scheme,this ring enables mating devices to be matchedquickly.It’s just one more example of user-oriented thinkingat <strong>Hubbell</strong>.Twist-Lock receptacles have always heldadvantages over conventional ones. Today’s Twist-Lock receptacles maintain the advantage bycombining functional design features, unparalleledquality <strong>and</strong> pace-setting performance.The terminals in each <strong>Hubbell</strong> Twist-Lockreceptacle are mechanically <strong>and</strong> electrically thefinest available. These terminals incorporateunique design features to contain <strong>and</strong> holdconductors, including an external backwiring#10 silicon bronze terminal screwprovides greater strength <strong>and</strong> resistanceto corrosion <strong>and</strong> stripping. Anti-rotationalclamp has a stop to limit the amountof cocking when only one side is used.Accommodates both back <strong>and</strong> side wiring.All-brass mounting <strong>and</strong> grounding system provides alower resistance ground path <strong>and</strong> greater resistanceto corrosion than steel mounting systems.Wire restraint recess for both back <strong>and</strong> sidewiring, greatly reduces the possibility ofloosening the terminal connection.“wraparound” clamp, a wire restraint recess <strong>and</strong>more.The materials used in every receptacle are of thehighest quality. The all brass mounting systemprovides a safer, lower resistance ground path thanthose made of steel. The thick wall base isconstructed of an engineered thermoplastic to offerthe benefits of a thermoset, yet with much greaterimpact resistance.<strong>Hubbell</strong> Twist-Lock Receptacles: Voltage colorcoding on the outside. Proven designs <strong>and</strong> qualitymaterials on the inside. Any way you look at them,they’re the st<strong>and</strong>ard of the industry.125V 250V 277V AC 480V AC 600V AC 125/250VB-14 www.hubbell-wiring.comDimensions in Inches (mm)
20 <strong>and</strong> 30 Ampere Plugs <strong>and</strong> Connector Bodies:The Difference Is INSULGRIP ® ...<strong>and</strong> a Whole Lot MoreFeatures <strong>and</strong> BenefitsTough ribbed nylon housing for secure gripping.Two-part cord grip tightens with twoscrews for maximum retention force.Broad gripping area to accommodatewide range of cable diameters.Wiring chambers separate <strong>and</strong> positivelyinsulate conductors <strong>and</strong> promote easyinspection.Insulated nylon constructionto keep non-current carrying partsfrom becoming energized.They’re new <strong>and</strong> better than ever. They’re the same<strong>and</strong> better than anything else on the market. They’re20 <strong>and</strong> 30 amp Insulgrip plugs <strong>and</strong> connectors. Wekept the same classic integrity, rock-solidconstruction <strong>and</strong> safety features that have madethese devices the industry st<strong>and</strong>ard. But, we addedenhancements because good is never good enoughfor <strong>Hubbell</strong>. We improved the contacts with betterterminations <strong>and</strong> an exclusive double rivet design forthe female contacts.We restyled the cord grips for a clean, one-piecelook—<strong>and</strong> made them stronger at the same time.And we introduced a whole new easier to readidentification system. And more, all the while, ofImproved terminationsinclude #10 multiple drivescrews <strong>and</strong> thicker .080"clamping nuts.Funneled holes to permit "straightin"conductor insertion.Self-threading screws speciallydesigned for secure assembly.Product indentification is visible while deviceis in use. Markings include catalog number <strong>and</strong>ratings printed in the IEC color scheme on thecurrent-carrying portion of the device.Integral dust shield protectswiring chamber from dust orcontaminants. Single-pieceshield/housing eliminates needfor separate step at installation.course, we maintained traditional Insulgrip features<strong>and</strong> benefits. Like the most powerful cord grip in theindustry. Insulgrip’s cord gripping design actuallyclamps the conductors, not just the cable jacket. Wekept the same nylon body <strong>and</strong> housing material forresistance to industrial chemicals, solvents <strong>and</strong>hydrocarbons. And, the front of each plug is stillmolded to its specific blade configuration, leaving noholes to invite debris or contamination (plus weadded a new dust shield).Of course, the <strong>Hubbell</strong> Twist-Lock ® line of plugs <strong>and</strong>connectors remains the broadest in the industry. Soif you prefer proven performance, innovation <strong>and</strong>selection—<strong>Hubbell</strong> has you covered.Locking <strong>Devices</strong> Features <strong>and</strong> BenefitsDimensions in Inches (mm)www.hubbell-wiring.comB-15
Features <strong>and</strong> Benefits Locking <strong>Devices</strong>50 Ampere Plugs <strong>and</strong> Connector Bodies:The Difference Is INSULGRIP ® ...<strong>and</strong> a Whole Lot MoreFeatures <strong>and</strong> BenefitsPadlockable shroudallows complianceto OSHA lockout tagoutregulation 29 CFR 1910 .147.Three-piece thermoplastic clampassembly with stainless steelfast lead screws provides amore consistent, durable grip.Sealed cable entry keeps outmoisture <strong>and</strong> dust.Stainless steel shroud cannot be distortedto mate with the wrong device.Box terminal with hex socket threadedslug is superior because it permits highclamping pressure on conductorswithout damaging str<strong>and</strong>s.Heavy-duty design for heavy-duty applications.These <strong>Hubbell</strong> 50A Twist-Lock plugs <strong>and</strong>connector bodies are built to go where you needpower...even in some of the harshestenvironments.On the outside, 50A plugs <strong>and</strong> connectors aremade of Super tough nylon for better impactresistance. On the plug, the stainless steel shroudnot only provides protection <strong>and</strong> durability, butsafety as well. That’s because the rigidconstruction cannot be distorted, thus minimizingthe possibility of mating incorrect devices.Rynite is a registered trademark of E. I. Dupont.Super tough nylon housing offers betterimpact qualities than regular nylon.Housing assembly latch slottedto fit st<strong>and</strong>ard flat-blade screwdriverproviding secure assembly <strong>and</strong>fast disassembly for wiring.Thermoplastic polyester interiorprovides heat resistance <strong>and</strong>impact strength.6/6 nylon nose –thermoplastic polyester terminalcover provides heat resistance interminal area <strong>and</strong> impact strengthof nose piece.One-piece grounding contact on4-wire devices provides a morereliable grounding systemfor a safer device.On the inside are the kinds of features thatseparate <strong>Hubbell</strong> from all the rest. The cord griphas been designed with offset gripping jaws tosecurely hold the conductors – not just the cordjacket. <strong>Hubbell</strong>’s box terminals speed wiring <strong>and</strong>provide a superior termination. The plug’s Rynite ®thermoplastic interior provides excellent heatresistance without compromising strength.In all, it’s the combination of function <strong>and</strong>performance that <strong>Hubbell</strong> dem<strong>and</strong>s of all itsproducts. And it’s why we’ll never add a featurethat compromises performance.B-16 www.hubbell-wiring.comDimensions in Inches (mm)
Safety-Shroud <strong>TWIST</strong>-LOCK ® System<strong>Hubbell</strong> Leads the Way in Safety…AgainFeatures <strong>and</strong> BenefitsNext-Generation <strong>Hubbell</strong> Twist-Lock:Here TodayIntroducing the next generation of the original: the<strong>Hubbell</strong> Twist-Lock. The <strong>Hubbell</strong> 20A <strong>and</strong> 30AInsulgrip ® Twist-Lock product line has been exp<strong>and</strong>edto provide a complete family of Safety-Shroud Twist-Lock devices. In this all-new line, plug blades areprotected by a fixed shroud that shields the bladesfrom possible deformation <strong>and</strong>, even moreimportantly, virtually eliminates user contact with anenergized partially connected plug.These products set an entirely new st<strong>and</strong>ard forimproved safety <strong>and</strong> reliability, <strong>and</strong> are available intwo distinct series:• Safety-Shroud Twist-Lock• Watertight Safety-Shroud Twist-LockThe Watertight Safety-Shroud Twist-Lock series hasachieved a UL Type 4X rating, which is capable ofwithst<strong>and</strong>ing the ingress of water under hose-downconditions. The entire outer shell is molded of a highimpact UL 94V-0 rated engineered thermoplastic. Acomplete line of receptacles, plugs, connector bodies<strong>and</strong> inlets is available in the most commonly requiredconfigurations <strong>and</strong> ratings.The Safety-Shroud Twist-Lock series is intended forinstallation where watertightness is not a factor, butthe added safety of the shrouded design is highlydesirable. Here again, the Safety-Shroud is moldedof an engineered thermoplastic for a very high level ofimpact resistance. In order to satisfy every application<strong>and</strong> every need, <strong>Hubbell</strong> offers this series in threedifferent styles of receptacles—surface, angle <strong>and</strong>semi-flush. Whether the needs are maintenance <strong>and</strong>repair, renovation or new construction, there is areceptacle design to accommodate your needs. Inaddition, this series offers Safety-Shroud plugs <strong>and</strong>even a separate Safety-Shroud kit that can be used toconvert the st<strong>and</strong>ard Insulgrip Twist-Lock plug into theshrouded design.To provide an additional measure of safety in theworkplace, <strong>Hubbell</strong> goes beyond shrouding to providemechanically interlocked enclosures, designedexpressly for use with this series, that virtually preventthe connecting <strong>and</strong> disconnecting of equipment underload. It’s another <strong>Hubbell</strong> first in the industry...theMechanically Interlocked Twist-Lock.As always, it’s extremely important to us that all ourproducts achieve a high level of compatibility withyour existing Twist-Lock device installations. First <strong>and</strong>foremost, the new Safety-Shroud series embodies thebasic NEMA configurations. Therefore, all shroudedreceptacles easily accept the st<strong>and</strong>ard NEMA lockingplugs already in use in your facility. A completecompatibility chart appears on page B-21 to explainevery circumstance.<strong>Hubbell</strong> Twist-Lock with our new Safety-Shroud:changes the st<strong>and</strong>ard of safety forever.Watertight MechanicalInterlock For Safety-Shroud Twist-Lock<strong>Hubbell</strong>’s CIRCUIT-LOCK ®enclosure line has beenexp<strong>and</strong>ed to include amechanical interlock designedfor use with the new Safety-Shroud Twist-Lock line. Theaddition of this mechanicalinterlock will complete yourSafety-Shroud Twist-Lockindustrial wiring system. Themechanical interlock is abreakthrough in design <strong>and</strong>virtually eliminates thepossibility of making orbreaking the circuit under load.Back Boxes<strong>Hubbell</strong> manufactures anextensive line of back boxesfor use with the new SafetyShroud Twist-Lock system.Each back box is designedto give the user themaximum amount of wiringroom while achievinggrounding to metallicconduit. <strong>Hubbell</strong> back boxesare available in non-metallic<strong>and</strong> cast metal versions.WatertightSafety-ShroudTwist-Lock ®This Type 4X rated productline is offered in a completefamily consisting of plugs,connector bodies,receptacles <strong>and</strong> inlets.Tough <strong>and</strong> tight, theseproducts are unequaled inperformance in even themost hostile applications.Safety-ShroudTwist-LockWhere watertightness is nota factor—but the addedmargin of safety from the<strong>Hubbell</strong> Safety-ShroudTwist-Lock is—we offer atotal product line for allapplications. In addition toSafety-Shroud plugs, thenew line includes nonwatertightreceptacles inthree styles—angle, surface<strong>and</strong> semi-flush to satisfyevery installation need.Locking <strong>Devices</strong> IntroductionDimensions in Inches (mm)www.hubbell-wiring.comB-17
Features <strong>and</strong> Benefits Locking <strong>Devices</strong>Watertight Safety-Shroud <strong>TWIST</strong>-LOCK ® SystemReceptacles, Plugs, Connector Bodies <strong>and</strong> Flanged InletsFeatures <strong>and</strong> BenefitsClosure cap is included for environmentalseal when device is not in use.One-piece, engineeredthermoplastic housing isimpact-resistant for heavydutyindustrial environments.All screws are #10 multipledrive head.Catalog number <strong>and</strong> color-coded voltage ratingare easily visible even when in use.Universal Neoprene DiaphragmSealSeal accommodates a wide range ofcord sizes from #16-3 Type SJ to #8-5Type S, SO.Panel Or Box Mount ReceptaclesAnd Inlets• High impact, thermoplastic housing forheavy-duty industrial environments.• Catalog number <strong>and</strong> color-codedvoltage rating are easily visible when inuse.• Stainless Steel 302/304, #10 multipledrive head mounting screws providecorrosion resistance.• Mounting screw recesses minimizescrewdriver slippage.• Lockout/tagout hole on inlets allowcompliance to OSHA regulation 29 CFR1910.147.• Neoprene closure cap provided withinlets for environmental seal when notin use.• Accepts all mating NEMA locking plugs<strong>and</strong> most connector bodies, allowinginterchangeability with existing devices.External keyingprovidesquick matingof devices.Blades are recessedfor protection againstbending <strong>and</strong> breaking.Alignment arrows <strong>and</strong> lock <strong>and</strong> unlock symbolsprovide a visual indication that devicesare properly connected.Cord grip screw recessminimizes screwdriverslippage.One-step automatic Neoprene sealing gl<strong>and</strong><strong>and</strong> engineered thermoplastic guard assuresealing when device is fully connected.Spring-Loaded CoverOne-step push-to-close spring-loadedcover with latch allows for fast opening<strong>and</strong> closing of lift cover. Result:environmental sealing is assured.Safety-Shroud• Virtually eliminates bent <strong>and</strong> brokenplug blades, leading to longerequipment life.• Extends life of mating receptacles byeliminating damage caused byinsertion of bent blades.• Extra protection for personnel bysignificantly reducing chance ofinadvertent contact with blades whenconnecting or disconnecting energizedreceptacles <strong>and</strong> connector bodies.• Reduces exposure to arcing whenconnecting or disconnecting plugsunder load.• Compliance with California Code ofRegulations, Title 8, Article 51,subsection 2510.7(b), which requiresshrouding for devices exceeding 300volts.• Lockout/tagout hole allows compliancewith OSHA regulation 29 CFR1910.147.• Sealing gl<strong>and</strong> <strong>and</strong> thermoplastic guardassure sealing when fully connected.B-18 www.hubbell-wiring.comDimensions in Inches (mm)
Safety-Shroud <strong>TWIST</strong>-LOCK ® SystemReceptacles <strong>and</strong> PlugsFeatures <strong>and</strong> BenefitsImpact resistant shroud madeof engineered thermoplasticprotects blades againstbending or breaking.External keying on plug devices allowsquick mating of devices.All screws are #10 multiple drive head.Semi-flush receptaclemounting provideslowest installed profilewhen plug is not in usewith receptacle. Thisdevice is designed forinstallation on 2 gangboxes.Alignment arrows <strong>and</strong> lock <strong>and</strong> unlock symbolsprovide a visual indication that devicesare properly connected.Lockout/tagout hole allows compliancewith OSHA regulation 29 CFR 1910.147.Safety-Shroud Plug Features <strong>and</strong> Benefits• Mates with most NEMA locking • Extends life of mating receptacles byconnector bodies.eliminating damage caused by• Virtually eliminates bent <strong>and</strong> broken insertion of bent blades.plug blades.• Complies with California Code of• Provides protection for personnel by Regulation, which requires shroudingreducing chance of inadvertent contact for devices exceeding 300 volts.with blades when connecting or • Lockout/tagout hole allows compliancedisconnecting energized devices. to OSHA regulation 29 CFR 1910.147.• Reduces exposure to arcing when • Allows engagement with Mechanicalconnecting or disconnecting under Interlock Enclosure which virtuallyload.prevents make <strong>and</strong> break under load.Straight receptaclehousing provides a lowinstalled profile whenplug is not in use withreceptacle. This deviceis designed forinstallation on singlegangboxes.Receptacle Features <strong>and</strong> Benefits• Internal keying on receptacles aligns • Catalog number <strong>and</strong> color-codedblades for quick mating of devices. voltage rating are visible when in use.• Accepts all NEMA locking plugs, • All screws are #10 multiple drive head.allowing interchangeability withexisting devices.Catalog number <strong>and</strong>color-coded voltage ratingare visible even when in use.Engineered thermoplastic housing is impact<strong>and</strong> corrosion resistant, making it suitable forheavy-duty industrial environments.Angle receptaclehousing provides lowinstalled profile whenplug is in use withreceptacle. Thisdevice is designedfor installation onsingle-gang boxes.• Engineered thermoplastic housing isimpact <strong>and</strong> corrosion-resistant, for usein heavy-duty industrial environments.Locking <strong>Devices</strong> Features <strong>and</strong> BenefitsDimensions in Inches (mm)www.hubbell-wiring.comB-19
Features <strong>and</strong> Benefits Locking <strong>Devices</strong>Switched Safety EnclosuresCIRCUIT-LOCK ® Unfused Safety-Shroud <strong>TWIST</strong>-LOCK ®Mechanical InterlockFeatures <strong>and</strong> BenefitsLockable h<strong>and</strong>le provides lockout protection for greater safety<strong>and</strong> compliance with OSHA lockout requirements.Heavy-duty interlock linkageprevents make <strong>and</strong> breakunder load.Horsepower rated switch.Heavy-duty internal frame bonds conduit<strong>and</strong> all grounds <strong>and</strong> has a DIN rail toaccommodate the switch.<strong>Hubbell</strong> introduces the firstmechanical interlock for Twist-Lock. This new, unfusedmechanical interlock forwatertight Safety-Shroud Twist-Lock integrates a watertightreceptacle with a linkeddisconnect switch to provide amechanically interlockedreceptacle. This virtuallyeliminates the possibility ofmaking or breaking the circuitMoveable feet may be used inhorizontal or vertical position.while under load or making acasual or “lazy” connection. Theswitch cannot be turned “ON”until the plug is properly inserted<strong>and</strong> locked, <strong>and</strong> the plug cannotbe removed until the switch isturned “OFF.” All these protectivefeatures are included in acompact Type 4X hose-directedwater <strong>and</strong> corrosion resistantenclosure that allows for top,bottom or back feed options. TheAngled 20 or 30 Amp <strong>Hubbell</strong> WatertightSafety-Shroud Twist-Lock receptacle provideswatertight, low profile <strong>and</strong> mechanicalinterlock capabilities.Enclosure back isdesigned for top,bottom or backfeed options.Premolded conduit entry hole is offset to prevent watercondensation from falling directly on to interior electricalcomponents. Also speeds installation by making it easierto pull conductors.non-metallic enclosure isnonconductive, yet has aninternal frame to assure groundcontinuity with metallic conduit.In addition, this interlock workswith all Safety-Shroud Twist-Lockplugs. The new unfusedmechanical interlock forwatertight Safety-Shroud Twist-Lock can be locked out as amethod of compliance withOSHA lockout/tagout regulations.B-20 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® SystemCompatibility <strong>and</strong> Environmental ProtectionWatertight Safety-Shroud , Safety-Shroud <strong>and</strong> NEMA <strong>Devices</strong>Twist-Lock PlugsTwist-Lock ReceptaclesSwitchedTwist-Lock ®EnclosurePSJO IST OTNCAT. NO. XSFIT ISTI EWR QFI TIEH SALAKJ SKAOFFONCAUTION: Saitiew ietioeta sitiebowtosntownf wthuil sothe othes istelsls tiesntofoenls.A TENTION: Alsritwheta dithe otehlsothe toehs wop thlslei toen l s lsjteloetyhenl iteh sithe ithelsl tihe h l.Twist-LockConnector BodiesWatertightSafety-ShroudMechanicalWatertightWatertight Interlock Switched Safety-Safety-Shroud Enclosure Safety-Shroud Enclosure NEMA Shroud NEMAWatertight YES YES YES NO NO YES YESSafety- Type 4X, Type 4X, Type 1 Type 4X, Type 1Shroud Type 12 Type 12K Type 12Safety- YES YES YES NO NO YES YESShroud Type 1 Type 1 Type 1 Type 1 Type 1NEMA YES NO YES YES YES YES YESType 1 Type 1 Type 3R Type 1 Type 1 Type 1Twist-Lock InletsNEMA NA NA NA NA NA NO YESType 1Watertight NA NA NA NA NA YES YESSafety- Type 4X, Type 1Shroud Type 12Type 1 IndoorType 3R RaintightType 4X Hose-directed water <strong>and</strong> corrosion resistantType 12 Dust tight, dripproof without knockoutsType 12K Dust tight, dripproof with knockoutsYES InterchangeableNO Does not interchangeNA Not ApplicableRefer to section W for full description of enclosure types.Locking <strong>Devices</strong> Compatibility <strong>and</strong> Environmental Protection ChartDimensions in Inches (mm)www.hubbell-wiring.comB-21
2P 3W, 20A, 125V, 250V <strong>and</strong> 277V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.26"(57.4)1.25" R.(31.8)1.97"(50.0)2.67"(67.8).98"(24.9)1.25" R.(31.8)1.70"(43.2)HBL2310120°HBL23132.04"(51.8)HBL2316120°3.86"(98.0)2.88"(73.2)2.75"(69.9)HBL23112.88"(73.2)1.23"(31.2)2.04"(51.8)HBL23151.56" 2.38"(39.6)(60.5)(83.3)3.28"#6-32 TAP.19"(4.8)DIA.120°2.09"(53.1).19"(4.8)DIA.120°2.09"(53.1)1.97"(50.0)2.26"(57.4)Single Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2310 HBL2320 HBL2330Isolated ground, orange nylon face. IG2310 IG2320 –Corrosion resistant, yellow nylon face. HBL23CM10 – –Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2313 HBL2323 HBL2333Corrosion resistant, yellow nylon. HBL23CM13 HBL23CM23 –Note: Cord clamp range .360”-.930” (9-24).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2316 HBL2326 HBL2336Insulgrip PlugsDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL2311 HBL2321 HBL2331Corrosion resistant, yellow nylon. HBL23CM11 HBL23CM21 –Notes: Cord grip range .360”-.930” (9-24).See page B-73 for Add-A-Shroud kit.GNEMA L5-20R20A 125VUL/CSA1 HPInsulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2315 HBL2325 HBL2335Notes: See pages B-68 <strong>and</strong> B-69 for accessories.See page B-63 for switched enclosure.For technical information see page B-83.HP ratings are AC only.Only receptacles <strong>and</strong> plugs are HP rated.WIP20 SUITABILITYWGNEMA L5-20P20A 125VUL/CSA1 HPGXYXYNEMA L6-20R20A 250VUL/CSA2 HPGNEMA L6-20P20A 250VUL/CSA2 HPGNEMA L7-20R20A 277V ACUL/CSA2 HPWWGNEMA L7-20P20A 277V ACUL/CSA2 HPB-22 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACWatertight Safety-Shroud <strong>TWIST</strong>-LOCK ® SystemUL Listed, CSACertified to Type4, 4X, & 12Watertight Safety-ShroudReceptacles, Back WiredDescriptionCatalog NumbersGray Valox ® housing & flange. HBL2310SW HBL2320SW HBL2330SWNote: Receptacles only fit boxes listed on Page B-72.Watertight Safety-Shroud Connector BodiesDescriptionCatalog NumbersBlack Valox housing, HBL2313SW HBL2323SW HBL2333SWWhite Valox clamps.Watertight Safety-ShroudPlugsDescriptionCatalog NumbersBlack Valox housing, HBL2311SW HBL2321SW HBL2331SWWhite Valox clamps.Watertight Safety-Shroud Flanged InletsDescriptionGCatalog NumbersGray Valox housing <strong>and</strong> flange. HBL2315SW HBL2325SW HBL2335SWNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.*Also suitable for 208V.HP ratings are AC only.Cord grip range for plugs <strong>and</strong> connector bodies.300”–.930” (9–24), #16-3 Type SJ to #8-3 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® UnfusedSafety-Shroud Mechanical Interlock for Twist-Lock ® ReceptaclesDescriptionCatalog NumberMechanical Interlock accommodatesHBLMITL**20A <strong>and</strong> 30A watertight safety-shroud receptacles.Note: **Not shown, see pages B-64 <strong>and</strong> B-65 for details.WNEMA L5-20R20A 125VUL/CSA1 HPNEMA L5-20P20A 125VUL/CSA1 HP®Valox is a registered trademark of General Electric Company.WGGNEMA L6-20R20A 250VUL/CSA2 HP*XYXYNEMA L6-20P*20A 250VUL/CSA2 HP*IP66SUITABILITYGGNEMA L7-20R20A 277V ACUL/CSA2 HPWWGNEMA L7-20P20A 277V ACUL/CSA2 HP3.75"(95.3)2.56"(65.0)2.78"(70.6)3.75"(95.3)3.75"(95.3)2.69"(68.3)HBL2320SW4.38"(111.1)HBL2323SW4.50"(114.3)HBL2321SW2.28"(57.9)3.75"(95.3)HBL2325SW1.50"(38.1)1.63"(41.4)Locking <strong>Devices</strong> 2P 3W, 20A, 125V, 250V <strong>and</strong> 277V ACDimensions in Inches (mm)www.hubbell-wiring.comB-23
2P 3W, 20A, 125V, 250V <strong>and</strong> 277V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® System2.26"(57.4)2.04"(51.8)5.12"(130.0)2.88"(73.2)HBL2320AR4.56"(115.8)5.12"(130.0)HBL2320SR23.86"(98.0)3.14"(79.8)HBL23231.58"(40.1)2.84"(72.1)HBL2320SR.77"(19.6)3.97"(100.8)HBL2321S4.57"(116.1)1.97"(50.0)2.26"(57.4)Safety-Shroud Twist-LockReceptacles, Back WiredDescriptionCatalog NumbersAngle housing one gang. HBL2310AR HBL2320AR HBL2330ARSurface mounting one gang. HBL2310SR HBL2320SR HBL2330SRSemi-flush two gang. HBL2310SR2 HBL2320SR2 HBL2330SR2Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange, gray Valox ® .IP20 SUITABILITYInsulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2313 HBL2323 HBL2333Note: Cord grip range .360”-.930 ” (9-24).IP20 SUITABILITYSafety-Shroud Male PlugsDescriptionNEMA L5-20R20A 125VUL/CSA1 HPCatalog NumbersBlack <strong>and</strong> white nylon body, HBL2311S HBL2321S HBL2331Swhite Valox ® shroud.Note: Cord clamp range .360”-.930 ” (9-24).Insulgrip ® Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2315 HBL2325 HBL2335Note: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.*Also suitable for 208V AC.HP ratings are AC only.For technical information, see page B-83.®Valox is a registered trademark of General Electric Company.GGWWNEMA L5-20R20A 125VUL/CSANEMA L5-20P20A 125VUL/CSA1 HPWWGGNEMA L5-20P20A 125VUL/CSAGXYNEMA L6-20R20A 250VUL/CSA2 HP*GXYNEMA L6-20R20A 250VUL/CSANEMA L6-20P*20A 250VUL/CSA2 HP*XYXYGGNEMA L6-20P20A 250VUL/CSA2 HPGWNEMA L7-20R20A 277V ACUL/CSA2 HPGWNEMA L7-20R20A 277V ACUL/CSAWGNEMA L7-20P20A 277V ACUL/CSA2 HPWGNEMA L7-20P20A 277V ACUL/CSA2 HPB-24 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACVALISE ® Plugs <strong>and</strong> Connector BodiesIP20SUITABILITYValise PlugsDescription Cord Dia. Catalog NumbersYellow nylon. .325”-.720” HBL2311VY HBL2321VY HBL2331VY(8.26-18.3)Corrosion resistant, .325”-.720” HBL23CM11V – –yellow nylon. (8.26-18.3)Black nylon. .325”-.720” HBL2311VBK HBL2321VBK HBL2331VBK(8.26-18.3)Valise Connector BodiesNEMA L5-20P20A 125VUL/CSA1 HPDescription Cord Dia. Catalog NumbersGWYellow nylon. .325”-.720” HBL2313VY HBL2323VY –(8.26-18.3)Black nylon. .325”-.720” HBL2313VBK HBL2323VBK HBL2333VBK(8.26-18.3)Notes: Connector bodies are not HP rated.HP ratings are AC only.See page B-88 for technical information.Weatherproof Accessories IP55** SUITABILITYDescriptionCatalog NumbersYellow Seal-Tite ® elastomer triple seal cover for use with Valise HBL60CM31V*plugs when used in cord set <strong>and</strong> Valise connector bodies when usedwith flanged inlet.Yellow Seal-Tite elastomer triple seal cover for use withHBL60CM32V*Valise connector bodies.Note: **When installed <strong>and</strong> used properly with plug <strong>and</strong> connector bodycombinations.* Not UL Listed, CSA CertifiedWGNEMA L5-20R20A 125VUL/CSANEMA L6-20P20A 250VUL/CSA2 HPGXYXGYNEMA L6-20R20A 250VUL/CSANEMA L7-20P20A 277V ACUL/CSA2 HPGWWGNEMA L7-20R20A 277V ACUL/CSA1.78"(45.2)1.78"(45.2)2.50"(63.5)HBL2311VY2.60"(66.0)HBL2313VYHBL60CM31VHBL60CM32VLocking <strong>Devices</strong> 2P 3W, 20A, 125V, 250V <strong>and</strong> 277V ACDimensions in Inches (mm)www.hubbell-wiring.comB-25
2P 3W, 20A, 347V AC, 480V AC <strong>and</strong> 600V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 347, 480 <strong>and</strong> 600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.26"(57.4)1.97"(50.0)2.67"(67.8).98"(24.9)120°.19"(4.8)DIA..19" 120°(4.8)DIA.1.70"(43.2)HBL23403.86"(98.0)HBL23432.88"(73.2)2.04"(51.8)HBL2346HBL23412.88"(73.2)120°2.75"(69.9)120°2.04"(51.8)HBL23451.23"(31.2)1.56" 2.38"(39.6) (60.5) (83.3)3.28"#6-32 TAP2.09"(53.1)1.25" R(31.8)2.09"(53.1)1.25" R(31.8)1.97"(50.0)2.26"(57.4)Single Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionIsolated ground, orange nylon face. – IG2340 –Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL3723 HBL2343 HBL2353Note: Cord clamp range .360”-.930 ” (9-24).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL3726 HBL2346 HBL2356Insulgrip PlugsDescriptionYNEMA L8-20R20A 480V ACUL/CSA3 HPBlack <strong>and</strong> white nylon. HBL3721 HBL2341 HBL2351Notes: Cord clamp range .360”-.930 ” (9-24).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL3725 HBL2345 HBL2355Notes: Only receptacles <strong>and</strong> plugs up to 480V AC are HP rated.For technical information see page B-83.See pages B-68 <strong>and</strong> B-69 for accessories.See page B-63 for switched enclosure.HP ratings are AC only.GXGXYNEMA L9-20R20A 600V ACUL/CSANEMA L24-20R20A 347V ACUL/CSACatalog NumbersBlack nylon face. HBL3720 HBL2340 HBL2350IP20 SUITABILITYGWYIP20 SUITABILITYXWGGYYNEMA L8-20PNEMA L24-20P 20A 480V ACUL/CSA20A 347V AC 3 HPUL/CSACatalog NumbersXYGNEMA L9-20P20A 600V ACUL/CSAB-26 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding30 Ampere, 125, 250 Volts <strong>and</strong> 277 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2610 HBL2620 HBL2630Isolated ground, orange nylon face. IG2610 IG2620 –Corrosion resistant, yellow nylon face. HBL26CM10 –Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2613 HBL2623 HBL2633Heat stabilized, gray nylon, 220° F (104° C). HBL2613F HBL2623F –Corrosion resistant, yellow nylon. HBL26CM13 HBL26CM23 –Note: Cord clamp range .360”-.930” (9-24).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2616 HBL2626 HBL2636Heat stabilized, gray nylon, 220° F (104° C). HBL2616F HBL2626F –Insulgrip PlugsDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL2611 HBL2621 HBL2631Heat stabilized, gray nylon, 220° F (104° C). HBL2611F HBL2621F –Corrosion resistant, yellow nylon. HBL26CM11 HBL26CM21 –Notes: Cord clamp range .360”-.930” (9-24).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2615 HBL2625 HBL2635Heat stabilized, gray nylon, 220° F (104° C). HBL2615F HBL2625F –Notes: All HP ratings are AC only. Only receptacles <strong>and</strong> plugs are HP rated.For technical information see page B-83.For accessories see pages B-68 <strong>and</strong> B-69.See page B-63 for switched enclosure.GWNEMA L5-30R30A 125VUL/CSA2 HPIP20 SUITABILITYWGNEMA L5-30P30A 125VUL/CSA2 HPGYNEMA L6-30R30A 250VUL/CSA2 HPXXGYNEMA L6-30P30A 250VUL/CSA2 HPGNEMA L7-30R30A 277V ACUL/CSA3 HPWWGNEMA L7-20P20A 277V ACUL/CSA2 HP2.26"(57.4)1.97"(50.0)2.67"(67.8).98"(24.9).19"(4.8)DIA..19"(4.8)DIA.120°120°1.70"(43.2)HBL26203.86"(98.0)HBL26232.88"(73.2)2.04"(51.8)HBL2626HBL26212.88"(73.2)2.04"(51.8)2.75"(69.9)120°HBL26251.23"(31.2)1.56" 2.38"(39.6)(60.5)(83.3)3.28"#6-32 TAP120°2.09"(53.1)2.09"(53.1)1.25" R(31.8)2.26"(57.4)1.25" R(31.8)1.97"(50.0)Locking <strong>Devices</strong> 2P 3W, 30A, 125V, 250V <strong>and</strong> 277V ACDimensions in Inches (mm)www.hubbell-wiring.comB-27
2P 3W, 30A, 125V, 250V Locking <strong>Devices</strong>3.75"(95.3)2.56"(65.0)2.78"(70.6)<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding30 Ampere, 125 <strong>and</strong> 250 VoltsWatertight Safety-Shroud <strong>TWIST</strong>-LOCK ® System3.75"(95.3)2.69"(68.3)3.75"(95.3)HBL2610SW4.38"(111.1)HBL2613SWHBL2611SW2.28"(57.9)3.75"(95.3)HBL2615SW1.50"(38.1)4.50"(114.3)1.63"(41.4)UL Listed, CSACertified to Type 4,4X, & 12Watertight Safety-ShroudReceptacles, Back WiredDescriptionCatalog NumbersGray Valox ® housing <strong>and</strong> flange. HBL2610SW HBL2620SWNote: Receptacles only fit boxes listed on page B-72.Watertight Safety-Shroud Connector BodiesDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2613SW HBL2623SWWatertight Safety-Shroud PlugsDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2611SW HBL2621SWWatertight Safety-Shroud Flanged InletsDescriptionCatalog NumbersGray Valox housing <strong>and</strong> flange. HBL2615SW HBL2625SWNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.*Also suitable for 208V.HP ratings are AC only.Cord grip range for plugs <strong>and</strong> connector bodies.325”-.930” (9-24). #16-3 Type SJ to #8-3 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® UnfusedSafety-Shroud Mechanical Interlock for Twist-Lock ® ReceptaclesDescriptionCatalog NumberMechanical Interlock accommodates 30AHBLMITL**watertight Safety-Shroud receptacles.Note: **Not shown, see pages B-64 <strong>and</strong> B-65.®Valox is a registered trademark of General Electric Company.GNEMA L5-30R30A 125VUL/CSA2 HPWWGNEMA L5-30P30A 125VUL/CSA2 HPIP66SUITABILITYGXYNEMA L6-30R30A 250VUL/CSA2 HP*XYGNEMA L6-30P30A 250VUL/CSA2 HP*B-28 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding30 Ampere, 125 <strong>and</strong> 250 VoltsSafety-Shroud <strong>TWIST</strong>-LOCK ® SystemSafety-Shroud Twist-LockReceptacles, Back WiredDescriptionCatalog NumbersAngle housing one gang. HBL2610AR HBL2620ARSurface mounting one gang. HBL2610SR HBL2620SRSemi-flush two gang. HBL2610SR2 HBL2620SR2Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange, gray Valox ® .UL/CSAInsulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2613 HBL2623Note: Cord clamp range .360”-.930 ” (9-24).Safety-Shroud Male PlugDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon body, HBL2611S HBL2621Swhite Valox shroud.Note: Cord clamp range .360”-.930 ” (9-24).Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2615 HBL2625Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.*Also suitable for 208V.HP ratings are AC only.For technical information see page B-83.®Valox is a registered trademark of General Electric Company.NEMA L5-30R30A 125VUL/CSA2 HPGGWNEMA L5-30R30A 125VNEMA L5-30P30A 125VUL/CSA2 HPWWWGNEMA L5-30P30A 125VUL/CSA2 HPGGGNEMA L6-30R30A 250VUL/CSA2 HP*NEMA L6-30R30A 250VUL/CSANEMA L6-30P30A 250VUL/CSA2 HP*XYXYXYXYGNEMA L6-30P30A 250VUL/CSA2 HPG2.26"(57.4)2.04"(51.8)5.12"(130.0)4.56"(115.8)2.88"(73.2)HBL2620AR5.12"(130.0)HBL2620SR23.86"(98.0)HBL26233.97"(100.8)3.14"(79.8)1.58"(40.1)2.84"(72.1)HBL2620SRHBL2621S.77"(19.6)4.57"(116.1)1.97"(50.0)2.26"(57.4)Locking <strong>Devices</strong> 2P 3W, 30A, 125V, 250VDimensions in Inches (mm)www.hubbell-wiring.comB-29
2P 3W, 30A, 125V, 250V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding30 Ampere, 125 <strong>and</strong> 250 VoltsVALISE ® Plugs <strong>and</strong> Connector Bodies1.78"(45.2)1.78"(45.2)2.50"(63.5)HBL2611VY2.60"(66.0)HBL2613VYHBL60CM31VHBL60CM32VValise Plugs IP20 SUITABILITYDescription Cord Dia. Catalog NumbersYellow nylon. .590”-.930” HBL2611VY HBL2621VY(15.0-23.6)Corrosion resistant, yellow nylon. .590”-.930” HBL26CM11V –(15.0-23.6)Black nylon. .590”-.930” HBL2611VBK HBL2621VBK(15.0-23.6)Valise Connector BodiesIP20 SUITABILITYNEMA L5-30P30A 125VUL/CSA2 HPDescription Cord Dia. Catalog NumbersYellow nylon. .590”-.930” HBL2613VY HBL2623VY(15.0-23.6)Corrosion resistant, yellow nylon. .590”-.930” HBL26CM13V –(15.0-23.6)Black nylon. .590”-.930” HBL2613VBK HBL2623VBK(15.0-23.6)Notes: Connector bodies are not HP rated.HP ratings are AC only.See page B-88 for technical information.Weatherproof Accessories IP55** SUITABILITYDescriptionCatalog NumbersYellow Seal-Tite ® elastomer triple seal cover for use with Valise HBL60CM31V*plugs when used in cord set <strong>and</strong> Valise connector bodies when usedwith flanged inlet.Yellow Seal-Tite elastomer triple seal cover for use with Valise HBL60CM32V*connector bodies.Note: **When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.* Not UL Listed, CSA Certified.GWWGNEMA L5-30R30A 125VUL/CSAXYGNEMA L6-30P30A 250VUL/CSA2 HPGXYNEMA L6-30R30A 250VUL/CSAB-30 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding30 Ampere, 480 <strong>and</strong> 600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2640 HBL2650Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2643 HBL2653Note: Cord clamp range .325”-.930 ” (8.25-24).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2646 HBL2656Insulgrip PlugsDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL2641 HBL2651Notes: Cord clamp range .325”-.930 ” (8.25-24).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2645 HBL2655Notes: Only receptacles <strong>and</strong> plugs up to 480V AC are HP rated.For technical information see page B-83.HP ratings are AC only.For accessories see pages B-68 <strong>and</strong> B-69.See page B-63 for switched enclosure.GIP20 SUITABILITYXXYNEMA L8-30R30A 480V ACUL/CSA5 HPGYNEMA L8-30P30A 480V ACUL/CSA5 HPGXXYNEMA L9-30R30A 600V ACUL/CSAGYNEMA L9-30P30A 600V ACUL/CSA2.67"(67.8).98"(24.9)2.26"(57.4)1.97"(50.0).19"(4.8) 120°DIA.120°.19"(4.8)DIA.1.70"(43.2)HBL26503.86"(98.0)HBL26532.88"(73.2)2.04"(51.8)HBL2656HBL26512.88"(73.2)2.04"(51.8)2.75"(69.9)120°HBL26551.56" 2.38"(39.6) (60.5) (83.3)3.28"#6-32 TAP1.23"(31.2)120°2.09"(53.1)2.09"(53.1)1.97"(50.0)1.25" R(31.8)2.26"(57.4)1.25" R(31.8)Locking <strong>Devices</strong> 2P 3W, 30A, 480V AC <strong>and</strong> 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-31
2P 3W, 50A, 125V, 250V <strong>and</strong> 480V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding50 Ampere, 125, 250 Volts <strong>and</strong> 480 Volts ACReceptacles, Connector Bodies, Plugs <strong>and</strong> Flanged Inlets2.59"(65.8)2.59"(65.8)1.03"(26.2)1.50"R(38.0)2.13"(54.1)2.44"(62)CS82696.34"(161.0)CS8264C6.38"(162.0)CS8265C3.50"(88.9)90°2.17"(55.1)CS8275HBL7774WO2.69" 3.28"(68.3) (83.3)2.62"(66.5).19"(4.8)DIA.Receptacles50A 125V50A 250VDescriptionCatalog NumbersBlack melamine. CS6370 CS8269 CS8469 †Connector BodiesDescriptionIP20 SUITABILITYCatalog NumbersNylon housing, Rynite ® interior. CS6360C CS8264C CS8464CNote: Cord clamp range .830”-1.100” (21.08-28.19).Plugs50A 125V50A 250V50A 480V ACIP20 SUITABILITYDescriptionCatalog NumbersNylon housing, Rynite interior. CS6361C CS8265C CS8465CNote: Cord clamp range .830”-1.100” (21.08-28.19).Flanged InletsDescriptionCatalog NumbersZinc plated steel casing. CS6377 † CS8275 CS8475 †thermoplastic interior.Note: See page B-16 for product features.AccessoriesIP55** SUITABILITYWeatherproof BootsDescriptionCatalog NumbersSeal-Tite ® triple seal black elastomeric cover for plugs when used HBL7716C*in a cord set <strong>and</strong> connector bodies when used with flanged inlets.Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C*when used with cord sets.Note: Boots shown on page B-74.Weatherproof Receptacle Cover PlatesDescriptionGray thermoplastic, corrosion resistant.Yellow thermoplastic, corrosion resistant.Receptacle Wall Plate & Box CoverDescriptionStainless steel 302/304, smooth.Galvanized Steel fits 4” square, 4 11/16” or 2 gang boxClosure Plug for 50A InletsDescriptionBlack closure plug.WGCatalog NumbersHBL7774WOHBL77CM74WOCatalog NumberS750HBL50SCCatalog NumberHBL4892*Notes: For additional accessories see page B-74.For technical information see page B-85.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.†Not CSA Certified.* Not UL Listed, CSA Certified.®Rynite is a registered trademark of E. I. Dupont.GWXYGYGXIP44 SUITABILITYXYG50A 480V ACYGXB-32 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding50 Ampere, 250 Volts DC <strong>and</strong> 600 Volts ACReceptacle, Connector Body, Plug <strong>and</strong> Flanged InletsReceptacleDescriptionBlack melamine.Connector BodyDescriptionNylon housing, Rynite ® interior.Note: Cord clamp range .830”-1.100” (21.08-28.19).Plug IP20 SUITABILITYDescriptionNylon housing, Rynite interior.Note: Cord clamp range .830”-1.100” (21.08-28.19).Flanged InletsDescriptionZinc plated steel casing, thermoplastic int.Zinc plated steel casing, thermoplastic int. with lift cover.AccessoriesWeatherproof Boots IP55** SUITABILITYDescriptionSeal-Tite triple seal black elastomeric cover for plugs when usedin a cord set <strong>and</strong> connector bodies when used with flanged inlets.Seal-Tite triple seal black elastomeric cover for connector bodieswhen used with cord sets.Weatherproof Receptacle Cover PlatesDescriptionGray thermoplastic, corrosion resistant.Yellow thermoplastic, corrosion resistant.Receptacle Wall Plate & Box CoverDescriptionStainless steel 302/304, smooth.Galvanized Steel fits 4” square, 4 11/16” or 2 gang boxClosure Plug for 50A InletsDescriptionIP20 SUITABILITYIP44 SUITABILITYCatalog NumberHBL3771Catalog NumberHBL3762CCatalog NumberHBL3763CCatalog NumbersHBL3777HBL3767Catalog NumbersHBL7716CHBL7717CCatalog NumbersHBL7774WOHBL77CM74WOCatalog NumberS750HBL50SCCatalog NumberBlack closure plug.HBL4892Notes: For additional accessories see page B-74.For technical information see page B-85.**IP55 suitability when installed <strong>and</strong> used properly with plug <strong>and</strong> connectorbody combinations.* Not UL Listed.® Rynite is a registered trademark of E. I. Dupont.X50A 250V DC50A 600V ACGYYG50A 250V DC50A 600V ACX. 19"(4.8)DIA.1.03"(26.2)1.50"R(38.0)2.13"(54.1)2.44"(62)HBL37716.34"(161.0)HBL3762C6.38"(162.0)HBL3763C3.50"(88.9)90°2.17"(55.1)HBL377790°3.50"(88.9)2.63"(66.8)1.50"R(38.0)HBL37672.69"(68.3) (83.3)3.28".19"(4.8)DIA.2.62"(66.5)2.19"(55.6).63"(16.0)2.59"(65.8)2.59"(65.8)Locking <strong>Devices</strong> 2P 3W, 50A, 250V DC <strong>and</strong> 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-33
3P 3W, 15A, 125/250V Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 3 Wire, Non-Grounding15 Ampere, 125/250 VoltsMidget <strong>TWIST</strong>-LOCK Flanged Receptacles <strong>and</strong> Plugs1.19"(30.2)1.17"(29.7).16"(4.1)DIA.1.17"(29.7)1.00"(25.4).16"(4.1)DIA.1.12"(28.4)HBL7487N2.06"(52.3)1.75"(44.5)1.19"(30.2)HBL74872.06"(52.3)1.75"(44.5)1.17"(29.7)HBL74891.61"(40.9)HBL7485V2.00"(50.8)1.59"(40.4)2.06"(52.3)1.75"(44.5)HBL7485HBL7432.97"(24.6)1.25"(31.8)1.69"(42.9).15"(3.8)DIA.1.13"(28.7)Flanged ReceptaclesDescriptionExposed terminals, black nylon flange.Catalog NumbersHBL7487NExposed terminals, stainless steel flange, HBL7487 –Covered terminals, stainless steel flange, HBL7489 –accepts cord .500” (12.7) in diameter.Male PlugsIP20 SUITABILITYDescription Cord Dia. Catalog NumbersValise ® plug, black nylon, with .300”-.430” – HBL7485Vinsulation displacement terminals, (7.6-10.9)multiple drive screws.Black nylon body, phenolic base, .281”-.421” – HBL7485multiple drive screw terminals, (7.1-10.7)cord grip.Same as above, except angle .335”-.421” – HBL7432cord grip. (8.5-10.7)Weatherproof BootDescriptionSeal-Tite ® cover, black elastomer, for use with a HBL7485Vor HBL7485 plug when used with a HBL7484V or HBL7484connector body when used with a flanged inlet.Catalog NumberHBL7495VNotes: These devices are not interchangeable with any other devices in this catalog.All male ground pins are solid <strong>and</strong> all female ground contacts have hollow sleeves.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.* Not UL Listed.HBL7495VIP55** SUITABILITYWXYNEMA ML-3R15A 125/250VWXYNEMA ML-3P15A 125/250VB-34 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 3 Wire, Non-Grounding15 Ampere, 125/250 VoltsMidget <strong>TWIST</strong>-LOCK <strong>Devices</strong>, Flanged Inlets <strong>and</strong> Connector BodiesFlanged InletsDescriptionCatalog NumbersExposed terminals, black nylon flange. – HBL7486NExposed terminals, stainless steel flange. – HBL7486Connector BodiesIP20 SUITABILITYDescription Cord Dia. Catalog NumbersValise ® type, black nylon, with .300”-.430” HBL7484V –insulation displacement terminals, (7.6-10.9)multiple drive screws.Black nylon body, phenolic base, .281”-.421” HBL7484 –multiple drive screws, cord grip. (7.1-10.7)Same as above, except for angle .335”-.421” HBL7433 –cord grip. (8.5-10.7)Weatherproof AccessoriesIP55** SUITABILITYDescriptionSeal-Tite ® cover, black elastomer, for use with a HBL7484V orHBL7484 connector body <strong>and</strong> a combination of HBL7485V orHBL7485 plug <strong>and</strong> HBL7495V cover.Closure cover for use with HBL7486 or HBL7486N.Catalog NumbersHBL7440V*HBL4889*Notes: These devices are not interchangeable with any other devices in this catalog.All male ground pins are solid <strong>and</strong> all female ground contacts have hollow sleeves.**IP55 suitability when installed <strong>and</strong> used properly with plug <strong>and</strong> connectorbody combinations.* Not UL Listed.WXYNEMA ML-3R15A 125/250VHBL4889WXYNEMA ML-3P15A 125/250V1.17"(29.7)1.00"(25.4).16"(4.1)DIA.1.28"(32.5)2.06"(52.3)1.75"(44.5)1.27"(32.3)HBL7486N2.06"(52.3)1.75"(44.5)1.22"(31)HBL74861.97"(50.0)HBL7484V2.42"(61.5)2.02"(51.3)HBL74841.69"(42.9)1.17"(29.7)HBL7433HBL7440V1.00"(25.4).15"(3.8)DIA.1.19"(30.2)1.13"(28.7)Locking <strong>Devices</strong> 3P 3W, 15A, 125/250VDimensions in Inches (mm)www.hubbell-wiring.comB-35
3P 3W, 20A <strong>and</strong> 30A, 125/250V Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 3 Wire Non-Grounding20 <strong>and</strong> 30 Ampere, 125/250 VoltsReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.26"(57.4)2.20"(57.2)#6-32TAP.19"(4.8)DIA.1.97"(50.0).19"(4.8)DIA.2.50"(63.5)#6-32TAP120°120°1.39"(35.2)HBL7310B1.71"(43.1)HBL33303.86"(98.0)HBL7314C2.88"(73.2)120°2.04"(51.8)HBL3326CHBL9965C2.88"(73.2)120°2.75"(69.9)2.04"(51.8)HBL3325C1.11"(28.2)1.38"(34.9) (60.5)2.38" 3.61"(91.6)1.28" (32.5)1.22"(31.0)1.57"(39.8)(60.5) 2.38"(91.6)3.61"2.09"(53.1)2.09"(53.1).97" (24.6)1.25" R(31.8)1.97"(50.0)2.26"(57.4)1.25" R(31.8)For Replacement Use OnlySingle Flush ReceptaclesDescriptionCatalog NumbersBlack urea face, back wired. HBL7310B HBL3330Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL7314C HBL3333CCorrosion resistant, yellow nylon. HBL73CM14C –Note: Cord grip range .360”-.930 ” (9-24).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL3326C HBL3335CInsulgrip PlugsDescriptionIP20 SUITABILITYIP20 SUITABILITYNon-NEMA20A 125/250VUL ListedCatalog NumbersBlack <strong>and</strong> white nylon. HBL9965C HBL3331CCorrosion resistant, yellow nylon. HBL99CM65C –Note: Cord grip range .360”-.930 ” (9-24).Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL3325C HBL3334CNote: See pages B-68 <strong>and</strong> B-69 for accessories.CAUTION: To avoid electrical shock, review premises carefully <strong>and</strong> do not use ifslot or blade configuration (design) is already in a circuit having a ratingdiffering from the rating of this device.WYXYXWNon-NEMA20A 125/250VUL ListedYXWNon-NEMA30A 125/250VUL ListedHPWYXNon-NEMA30A 125/250VUL ListedHPB-36 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding20 Ampere, 125/250 Volts, 3Ø 250 <strong>and</strong> 3Ø 480 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2410 HBL2420 HBL2430Isolated ground, orange nylon face. IG2410 IG2420 –Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2413 HBL2423 HBL2433Corrosion resistant, yellow nylon. HBL24CM13 HBL24CM23 HBL24CM33Note: Cord clamp range .35”-1.15 ” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2416 HBL2426 HBL2436Insulgrip PlugsDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL2411 HBL2421 HBL2431Corrosion resistant, yellow nylon. HBL24CM11 HBL24CM21 HBL24CM31Notes: Cord clamp range .35”-1.15 ” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2415 HBL2425 HBL2435Notes: All HP ratings are AC only.HP ratings not in parentheses are phase to phase.HP rating in parentheses is phase to neutral.Only receptacles <strong>and</strong> plugs are HP rated.See pages B-70 <strong>and</strong> B-71 for accessories.For technical information see page B-83.See page B-63 for switched enclosure.GXWYNEMA L14-20R20A 125/250VUL/CSA2 (1) HPIP20 SUITABILITYWXYGNEMA L14-20P20A 125/250V ACUL/CSA2 (1) HPGZNEMA L15-20R20A 3Ø 250V ACUL/CSA3 HPYXXZYGNEMA L15-20P20A 3Ø 250V ACUL/CSA3 HPGZNEMA L16-20R20A 3Ø 480V ACUL/CSA5 HPYXXYGZNEMA L16-20P20A 3Ø 480V ACUL/CSA5 HP2.33"(59.2 ).19"(4.8) 120°DIA.2.21"(56.1)2.67"(67.8)#6-32TAP.19" 120°(4.8)DIA.1.70"(43.2)HBL24103.86"(98.0)HBL24133.06"(77.7)2.23"(56.6)HBL2416HBL24113.06"(77.7)2.75"(69.9)2.23"(56.6)HBL24151.56"(39.6) (60.5) 2.38"(83.3)3.28"120°120°1.23"(31.2).98"(24.9)2.27"(57.7)2.27"(57.7)2.21"(56.1)1.34" R(34.0)2.33"(59.2)1.34" R(34.0)Locking <strong>Devices</strong> 3P 4W, 20A, 125/250V, 3Ø 250 <strong>and</strong> 3Ø 480V ACDimensions in Inches (mm)www.hubbell-wiring.comB-37
3P 4W, 20A, 125/250V, 3Ø 250 <strong>and</strong> 3Ø 480V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding20 Ampere, 125/250 Volts, 3Ø 250 <strong>and</strong> 3Ø 480 Volts ACWatertight Safety-Shroud <strong>TWIST</strong>-LOCK System3.75"(95.3)2.75"(69.9)2.94"(74.7)4.38"(111.1)HBL2423SWHBL2421SW3.75"(95.3)2.91"(73.9)3.75"(95.3)HBL2420SW2.44"(62.0)3.75"(95.3)HBL2425SW4.50"(114.3)1.75"(44.5)1.81"(46.0)UL Listed, CSACertified to Type 4,4X, & 12Watertight Safety-ShroudTwist-Lock ReceptaclesDescriptionCatalog NumbersGray Valox ® housing <strong>and</strong> flange. HBL2410SW HBL2420SW HBL2430SWNote: Receptacles only fit boxes listed on page B-72.Watertight Safety-ShroudConnector BodiesDescriptionCatalog NumbersBlack Valox housing, HBL2413SW HBL2423SW HBL2433SWwhite Valox clamps.WatertightSafety-Shroud PlugsDescriptionCatalog NumbersBlack Valox housing, HBL2411SW HBL2421SW HBL2431SWwhite Valox clamp.WatertightSafety-Shroud InletsDescriptionCatalog NumbersGray Valox housing <strong>and</strong> flange. HBL2415SW HBL2425SW HBL2435SWNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.HP rating in parentheses is phase to neutral.Cord grip range for plugs <strong>and</strong> connector bodies.35”-1.15” (9-29), #16-4 Type SJ to #8-4 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® Unfused Safety-ShroudMechanical Interlock for Twist-Lock ® ReceptaclesDescriptionCatalog NumberMechanical Interlock accommodatesHBLMITL*20A <strong>and</strong> 30A watertight Safety-Shroud receptacles.Note: *Not shown, see pages B-64 <strong>and</strong> B-65 for complete details.®Valox is a registered trademark of General Electric Company.GNEMA L14-20R20A 125/250VUL/CSA2 (1) HPWXYXYWGNEMA L14-20P20A 125/250VUL/CSA2 (1) HPGXZYNEMA L15-20R20A 3Ø 250V ACUL/CSA3 HPYXZGNEMA L15-20P20A 3Ø 250V ACUL/CSA3 HPIP66SUITABILITYGXZYNEMA L16-20R20A 3Ø 480V ACUL/CSA5 HPYXZGNEMA L16-20P20A 3Ø 480V ACUL/CSA5 HPB-38 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding20 Ampere, 125/250 Volts, 3Ø 250 <strong>and</strong> 3Ø 480 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® SystemSafety-Shroud Twist-LockReceptaclesDescriptionCatalog NumbersGray Valox ® Angle housing, one gang. HBL2410AR HBL2420AR HBL2430ARGray Valox Surface mounting, one gang. HBL2410SR HBL2420SR HBL2430SRGray Valox Semi-flush, two gang. HBL2410SR2 HBL2420SR2 HBL2430SR2Note: See page B-72 for box mounting application.Housing <strong>and</strong> flange gray Valox.IP20 SUITABILITYInsulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2413 HBL2423 HBL2433Note: Cord clamp range .35”-1.15 ” (9-29).IP20 SUITABILITYSafety-Shroud Twist-LockPlugsDescriptionCatalog NumbersBlack <strong>and</strong> white nylon body, HBL2411S HBL2421S HBL2431Swhite Valox shroud.Note: Cord clamp range .35”-1.15 ” (9-29).Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2415 HBL2425 HBL2435Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.For technical information, see page B-83.HP rating in parentheses is phase to neutral.®Valox is a registered trademark of General Electric Company.NEMA L14-20R20A 125/250VUL/CSA2 (1) HPGGXYWNEMA L14-20P20A 125/250VUL/CSA2 (1) HPWWXYXYXYWNEMA L14-20R20A 125/250VUL/CSAGGNEMA L14-20P20A 125/250VUL/CSAGNEMA L15-20R20A 3Ø 250V ACUL/CSA3 HPGYXZXZYGNEMA L15-20P20A 3Ø 250V ACUL/CSA3 HPYXZXZYNEMA L15-20R20A 3Ø 250V ACUL/CSAGNEMA L15-20P20A 3Ø 250V ACUL/CSAGXZYNEMA L16-20R20A 3Ø 480V ACUL/CSA5 HPYGXZGNEMA L16-20P20A 3Ø 480V ACUL/CSA5 HPYXZXZYNEMA L16-20R20A 3Ø 480V ACUL/CSAGNEMA L16-20P20A 3Ø 480V ACUL/CSA2.33"(59.2)2.21"(56.1)5.12"(130.0)4.56"(115.8)2.85"(72.4)HBL2420AR5.12"(130.0)3.86"(98.0)HBL24234.12"(104.6)HBL2421S3.14"(79.8)1.71"(43.4)2.84"(72.1)HBL2420SR.77"(19.6)HBL2420SR24.57"(116.1)2.21"(56.1)2.33"(59.2)Locking <strong>Devices</strong> 3P 4W, 20A, 125/250V, 3Ø 250 <strong>and</strong> 3Ø 480V ACDimensions in Inches (mm)www.hubbell-wiring.comB-39
3P 4W, 30A, 125/250V, 3Ø 250V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 125/250 Volts <strong>and</strong> 3Ø 250 VoltsReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.33"(59.2).19"(4.8) 120°DIA.2.21"(56.1)2.67"(67.8)#6-32TAP.19" 120°(4.8)DIA.1.70"(43.2)HBL27103.86"(98.0)HBL27133.06"(77.7)2.23"(56.6)HBL2716HBL27113.06"(77.7)120°2.75"(69.9)2.23"(56.6)HBL27151.56"(39.6) (60.5) 2.38"(83.3)3.28"120°1.23"(31.2).98"(24.9)2.27"(57.7)2.27"(57.7)2.21"(56.1)1.34" R(34.0)2.33"(59.2)1.34" R(34.0)Single Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2710 HBL2720Isolated ground, orange nylon face. IG2710 IG2720Insulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2713 HBL2723Corrosion resistant, yellow nylon. HBL27CM13 HBL27CM23Note: Cord clamp range .35”-1.15 ” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2716 HBL2726Insulgrip PlugsDescriptionIP20 SUITABILITYYNEMA L14-30R30A 125/250VUL/CSA2 (2) HPYNEMA L14-30P30A 125/250VUL/CSA2 (2) HPCatalog NumbersBlack <strong>and</strong> white nylon. HBL2711 HBL2721Corrosion resistant, yellow nylon. HBL27CM11 HBL27CM21Notes: Cord clamp range .35”-1.15 ” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2715 HBL2725Notes: HP ratings not in parentheses are phase to phase.HP rating in parentheses is phase to neutral.Only receptacles <strong>and</strong> plugs are HP rated.See pages B-70 <strong>and</strong> B-71 for accessories.For technical information see page B-83.See page B-63 for switched enclosure.GIP20 SUITABILITYWXXWGGZNEMA L15-30R30A 3Ø 250V ACUL/CSA3 HPYXXYGZNEMA L15-30P30A 3Ø 250V ACUL/CSA3 HPB-40 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 125/250 Volts <strong>and</strong> 3Ø 250 Volts ACWatertight Safety-Shroud <strong>TWIST</strong>-LOCK ® SystemWatertight Safety-ShroudTwist-Lock ReceptaclesDescriptionUL Listed, CSA Certified to Type 4, 4X, & 12Catalog NumbersGray Valox ® housing <strong>and</strong> flange. HBL2710SW HBL2720SWNote: Receptacles only fit boxes listed on page B-72.Watertight Safety-ShroudTwist-Lock Connector BodiesDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2713SW HBL2723SWWatertight Safety-ShroudTwist-Lock PlugsDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2711SW HBL2721SWWatertight Safety-ShroudTwist-Lock InletsDescriptionCatalog NumbersGray Valox housing <strong>and</strong> flange. HBL2715SW HBL2725SWNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.HP rating in parentheses is phase to neutral.Cord grip range for plugs <strong>and</strong> connector bodies.35 ”-1.15 ” (9-29), #16-4 Type SJ to #8-4 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® Unfused Safety-ShroudMechanical Interlock for Twist-Lock ReceptaclesDescriptionCatalog NumbersMechanical Interlock accommodatesHBLMITL*20A <strong>and</strong> 30A watertight Safety-Shroud receptacles.Note: *Not shown, see pages B-64 <strong>and</strong> B-65 for complete details.®Valox is a registered trademark of General Electric Company.GWXYXYWNEMA L14-30R30A 125/250VUL/CSA2 (2) HPGNEMA L14-30P30A 125/250VUL/CSA2 (2) HPIP66SUITABILITYGYXZXZYNEMA L15-30R30A 3Ø 250V ACUL/CSA3 HPGNEMA L15-30P30A 3Ø 250V ACUL/CSA3 HP3.75"(95.3)2.75"(69.9)2.94"(74.7)3.75"(95.3)3.75"(95.3)2.91"(73.9)HBL2710SW4.38"(111.1)HBL2713SWHBL2711SW2.44"(62.0)3.75"(95.3)HBL2715SW4.50"(114.3)1.75"(44.5)1.81"(46.0)Locking <strong>Devices</strong> 3P 4W, 30A, 125/250V, 3Ø 250V ACDimensions in Inches (mm)www.hubbell-wiring.comB-41
3P 4W, 30A, 125/250V, 3Ø 250V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 125/250 Volts <strong>and</strong> 3Ø 250 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® System2.33"(59.3)2.21"(56.1)5.12"(130.0)2.88"(73.2)HBL2710AR4.56"(115.8)3.14"(79.8)5.12"(130.0)HBL2710SR23.86"(98.0)HBL27134.12"(104.6)HBL2711S1.71"(43.4)2.84"(72.1)HBL2710SR4.57"(116.1).77"(19.6)2.21"(56.1)2.33"(59.3)Safety-ShroudTwist-Lock ReceptaclesDescriptionFCatalog NumbersAngle housing one gang. HBL2710AR HBL2720ARSurface mounting one gang. HBL2710SR HBL2720SRSemi-flush two gang.HBL2710SR2 HBL2720SR2Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange, gray Valox ® .IP20 SUITABILITYInsulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2713 HBL2723Note: Cord clamp range .35”-1.15” (9-29).IP20 SUITABILITYSafety-Shroud Twist-Lock PlugsDescriptionCatalog NumbersBlack <strong>and</strong> white nylon body, white Valox shroud. HBL2711S HBL2721SNote: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged InletDescriptionCatalog NumbersNylon casing, back wired. HBL2715 HBL2725Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.HP rating in parentheses is phase to neutral.For technical information, see page B-83.®Valox is a registered trademark of General Electric Company.SFed.Spec.GNEMA L14-30R30A 125/250VUL/CSA2 (2) HPGWXYXYWYNEMA L14-30R30A 125/250VUL/CSAWXYXWGNEMA L14-30P30A 125/250VUL/CSA2 (2) HPGNEMA L14-30P30A 125/250VUL/CSAGYXZXZYNEMA L15-30R30A 3Ø 250V ACUL/CSA3 HPGXYZNEMA L15-30R30A 3Ø 250V ACUL/CSAYXZNEMA L15-30P30A 3Ø 250V ACUL/CSA3 HPGGNEMA L15-30P30A 3Ø 250V ACUL/CSAB-42 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 3Ø 480 <strong>and</strong> 3Ø 600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsFSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2730 HBL2740Not Fed Spec.Insulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2733 HBL2743Corrosion resistant, yellow nylon. HBL27CM33 HBL27CM43Note: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2736 HBL2746Insulgrip PlugsDescriptionSFed.Spec.IP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL2731 HBL2741Corrosion resistant, yellow nylon. HBL27CM31 HBL27CM41Notes: Cord clamp range .35”-1.15” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, backwired. HBL2735 HBL2745Notes: HP ratings listed above are AC only.See pages B-70 <strong>and</strong> B-71 for accessories.Only receptacles <strong>and</strong> plugs are HP rated <strong>and</strong> up to 480V AC only.For technical information see page B-83.See page B-63 for a switched enclosure.GYXXYZNEMA L16-30R30A 3Ø 480V ACUL/CSA10 HPGZNEMA L16-30P30A 3Ø 480V ACUL/CSA10 HPGYXXYZNEMA L17-30R30A 3Ø 600V ACUL/CSAGZNEMA L17-30P30A 3Ø 600V ACUL/CSA2.67"(67.8)#6-32TAP2.33"(59.3)2.21"(56.1)1.70"(43.2) 1.23"(31.2)HBL27303.86"(98.0)HBL2733HBL27362.75"(69.9)HBL27311.56"(39.6) (60.5) 2.38"(83.3)3.28".98"(24.9)2.21"(56.1)2.33"(59.2)Locking <strong>Devices</strong> 3P 4W, 30A, 3Ø 480 <strong>and</strong> 3Ø 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-43
3P 4W, 30A, 3Ø 480 <strong>and</strong> 3Ø 600V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 3Ø 480 <strong>and</strong> 3Ø 600 Volts ACWatertight Safety-Shroud <strong>TWIST</strong>-LOCK ® System3.75"(95.3)2.75"(69.9)2.94"(74.7)3.75"(95.3)2.91"(73.9)3.75"(95.3)HBL2730SW4.38"(111.1)HBL2733SW4.50"(114.3)HBL2731SW2.44"(62.0)3.75"(95.3)HBL2735SW1.75"(44.5)1.81"(46.0)UL Listed, CSA Certified to Type 4, 4X, & 12Watertight Safety-ShroudTwist-Lock ReceptaclesDescriptionCatalog NumbersGray Valox ® housing <strong>and</strong> flange. HBL2730SW HBL2740SWNote: Receptacles only fit boxes listed on page B-72.Watertight Safety-ShroudTwist-Lock Connector BodiesDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2733SW HBL2743SWWatertight Safety-ShroudTwist-Lock PlugsDescriptionCatalog NumbersBlack Valox housing, white Valox clamps. HBL2731SW HBL2741SWWatertight Safety-ShroudTwist-Lock InletsDescriptionCatalog NumbersGray Valox housing <strong>and</strong> flange. HBL2735SW HBL2745SWNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.Cord grip range for plugs <strong>and</strong> connector bodies.35”-1.15” (9-29), #16-4 Type SJ to #8-4 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® Unfused Safety-ShroudMechanical Interlock for Twist-Lock ReceptaclesDescriptionCatalog NumberMechanical Interlock accommodatesHBLMITL*20A <strong>and</strong> 30A watertight Safety-Shroud receptacles.Note: *See pages B-64 <strong>and</strong> B-65 for complete details.®Valox is a registered trademark of General Electric Company.GYXZXZYNEMA L16-30R30A 3Ø 480V ACUL/CSA10 HPGNEMA L16-30P30A 3Ø 480V ACUL/CSA10 HPIP66SUITABILITYGNEMA L17-30R30A 3Ø 600V ACUL/CSAYXZXZYGNEMA L17-30P30A 3Ø 600V ACUL/CSAB-44 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 3Ø 480 <strong>and</strong> 3Ø 600 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® SystemSafety-ShroudTwist-Lock ReceptaclesDescriptionCatalog NumbersAngle housing one gang. HBL2730AR HBL2740ARSurface mounting one gang. HBL2730SR HBL2740SRSemi-flush two gang.HBL2730SR2 HBL2740SR2Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange, gray Valox ® .IP20 SUITABILITYInsulgrip Connector BodiesDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2733 HBL2743Note: Cord clamp range .35”-1.15” (9-29).IP20 SUITABILITYSafety-Shroud Twist-Lock PlugsDescriptionCatalog NumbersBlack <strong>and</strong> white nylon body, HBL2731S HBL2741Swhite Valox shroud.Note: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2735 HBL2745Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.For technical information, see page B-83.®Valox is a registered trademark of General Electric Company.GGYYXZXXZXZYNEMA L16-30R30A 3Ø 480V ACUL/CSA10 HPYZNEMA L16-30R30A 3Ø 480V ACUL/CSAGNEMA L16-30P30A 3Ø 480V ACUL/CSA10 HPGNEMA L16-30P30A 3Ø 480V ACUL/CSAGGYYXZXXZNEMA L17-30P30A 3Ø 600V ACUL/CSAXZYNEMA L17-30R30A 3Ø 600V ACUL/CSAYZNEMA L17-30R30A 3Ø 600V ACUL/CSAGGNEMA L17-30P30A 3Ø 600V ACUL/CSA2.33"(59.3)2.21"(56.1)5.12"(130.0)4.56"(115.8)2.88"(73.2)HBL2730AR5.12"(130.0)HBL2730SR23.86"(98.0)3.14"(79.8)HBL27334.12"(104.6)HBL2731S1.71"(43.4)2.84"(72.1)HBL2730SR4.57"(116.1).77"(19.6)2.21"(56.1)2.33"(59.3)Locking <strong>Devices</strong> 3P 4W, 30A, 3Ø 480 <strong>and</strong> 3Ø 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-45
3P 4W, 50A, 125/250V, 3Ø 250 <strong>and</strong> 3Ø 480V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding50 Ampere, 125/250 Volts, 3Ø 250 <strong>and</strong> 3Ø 480V ACReceptacles, Connector Bodies, Plugs <strong>and</strong> Flanged Inlets2.59"(65.8)2.59"(65.8)1.50"R(38.0)2.13"(54.1)1.03"(26.2)2.44"(62.0)CS63696.34"(161.0)CS6364C6.38"(162.0)CS6365C3.50"(88.9)90°2.17"(55.1)CS6375HBL7774WO2.69" 3.28"(68.3) (83.3) ReceptaclesDescriptionCatalog NumbersBlack melamine. CS6369 CS8369 CS81692.62"(66.5).19"(4.8)DIA.Connector BodiesDescriptionIP20 SUITABILITYCatalog NumbersNylon cover, Rynite ® interior. CS6364C CS8364C CS8164CNote: Cord clamp range .920”-1.2” (23.681-30.48).Plugs IP20 SUITABILITYDescriptionCatalog NumbersNylon cover, Rynite interior. CS6365C CS8365C CS8165CNote: Cord clamp range .920”-1.2” (23.681-30.48).Flanged InletsDescriptionCatalog NumbersZinc plated steel casing, Rynite interior. CS6375*** CS8375 CS8175Note: ***See page V-12 for weatherproof inlet.AccessoriesWeatherproof Boots IP55** SUITABILITYDescriptionCatalog NumbersSeal-Tite ® triple seal black elastomeric cover for plugs when used HBL7716C*in a cord set <strong>and</strong> connector bodies when used with flanged inlets.Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C*when used with cord sets.Note: Boots shown on page B-74.Weatherproof Receptacle Cover PlatesDescriptionGray thermoplastic, corrosion resistant.Yellow thermoplastic, corrosion resistant.Receptacle Wall Plate & Box CoverDescriptionStainless steel 302/304, smooth.Galvanized Steel fits 4” square, 4 11/16” or 2 gang boxClosure Plug for 50A InletsDescriptionXGCatalog NumbersHBL7774WOHBL77CM74WOCatalog NumberS750HBL50SCCatalog NumberBlack closure plug.HBL4892*Notes: For additional accessories see page B-74.For technical information see page B-85.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combination.* Not UL Listed, CSA Certified.®Rynite is a registered trademark of E. I. DupontYWYW50A125/250VUL/CSAGX50A125/250VUL/CSAGXYZZY50A 3Ø250V ACUL/CSAXG50A 3Ø250V ACUL/CSAGXZYZY50A 3Ø480V ACUL/CSA50A 3Ø480V ACUL/CSAXGB-46 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding50 Ampere, 600 Volts AC, 250 Volts DCReceptacles, Connector Bodies, Plugs <strong>and</strong> Flanged InletsImportant Note: Catalog numbers HBL7379, HBL7764C, HBL7765C,HBL7958, HBL7968 are for replacement use only. See other singly rated50A Twist-Lock ® devices in this section. HBL3700 series Twist-Lockdevices do not interchange with any other devices in this section.ReceptaclesDescriptionCatalog NumbersBlack melamine. HBL3769 HBL7379Connector BodiesDescriptionIP20 SUITABILITYCatalog NumbersNylon cover, Rynite ® interior. HBL3764C HBL7764CNote: Cord clamp range .920”-1.20” (23.36-30.48).Plugs IP20 SUITABILITYDescriptionCatalog NumbersNylon cover, Rynite interior. HBL3765C HBL7765CNote: Cord clamp range .920”-1.20” (23.36-30.48).Flanged InletsDescriptionCatalog NumbersZinc plated steel casing, with lift cover. HBL3768 HBL7968Zinc plated steel casing, without lift cover. HBL3775 HBL7958AccessoriesWeatherproof Boots IP55* SUITABILITYDescriptionCatalog NumbersSeal-Tite ® triple seal black elastomeric cover for plugs when used HBL7716C** *in a cord set <strong>and</strong> connector bodies when used with flanged inlets.Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C** *when used with cord sets.Weatherproof Receptacle Cover PlatesDescriptionGray thermoplastic, corrosion resistant.Yellow thermoplastic, corrosion resistant.Receptacle Wall Plate & Box CoverDescriptionStainless steel 302/304, smooth.Galvanized Steel fits 4” square, 4 11/16” or 2 gang boxClosure Plug for 50A InletsDescriptionIP44* SUITABILITYCatalog NumbersHBL7774WOHBL77CM74WOCatalog NumberS750HBL50SCCatalog NumberBlack closure plug.HBL4892*Notes: For additional accessories see page B-74.For technical information see page B-85.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combination.®Rynite is a registered trademark of E. I. Dupont.*Not UL Listed, Not CSA Certified.GXYZZYXG50A 600V AC50A 250V DC50A 600V AC50A 250V DCZXYYXG50A 600V AC50A 250V DCZG50A 600V AC50A 250V DC2.69"(68.3)1.03"(26.2)2.59"(65.8)2.59"(65.8).19"(4.8)DIA.1.50"R(38.0)2.13"(54.1)2.44"(62.0)HBL37696.34"(161.0)HBL3764C6.38"(162.0)HBL3765C90°3.50"(88.9)HBL37683.50"(88.9)90°2.17"(55.1)HBL37752.63"(66.8)1.50"R(38.0)2.62"(66.5)3.28"(83.3)2.19"(55.6).19"(4.8)DIA.Locking <strong>Devices</strong> 3P 4W, 50A, 250V DC <strong>and</strong> 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-47
4P 4W, 20A, 3ØY 120/208, 277/480 <strong>and</strong> 347/600V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 4 Wire Non-Grounding20 Ampere, 3Ø Y 120/208, 277/480 <strong>and</strong> 347/600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Plugs <strong>and</strong> Flanged <strong>Devices</strong>2.67"(67.8)2.33"(59.2).98"(24.9).19"120°(4.8)DIA.2.21"(56.1).19" 120°(4.8)DIA.1.70"(43.2)HBL2440HBL24433.06"(77.7)2.23"(56.6)HBL2446HBL24413.06"(77.7)2.23"(56.6)3.86"(98.0)HBL24451.23"(31.2)1.56"(39.6) 2.38"(60.5) 3.28"(83.3)#6-32 TAP120°2.75"(69.9)120°2.27"(57.7)2.27"(57.7)1.34" R(34.0)1.34" R(34.0)2.33"(59.2)2.21"(56.1)FSFed.Spec.Single Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2440 HBL2450 HBL2460Not Fed Spec.Insulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2443 HBL2453 HBL2463Note: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2446 HBL2456 HBL2466Insulgrip Plugs IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2441 HBL2451 HBL2461Notes: Cord clamp range .35”-1.15” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2445 HBL2455 HBL2465AccessoriesWall Plates IP55** SUITABILITYDescriptionStainless steel 302/304, smooth, single-gang.Brass, smooth, single-gang.Black, smooth nylon, single-gang.Weatherproof Boots IP55* SUITABILITYDescriptionSeal-Tite triple seal cover for plug when used on a cord setor when used with flush receptacles or connector body whenused with flanged inlets. Black elastomer.Same as above except yellow.Seal-Tite ® triple seal cover for connector body, when used oninterconnecting cord sets. Black elastomer.YWZNEMA L18-20P20A 3ØY120/208V ACUL Listed2 HPZNEMA L19-20P20A 3ØY277/480V ACUL Listed5 HPZNEMA L20-20P20A 3ØY347/600V ACUL ListedCatalog NumbersS720B720P720BCatalog NumbersHBL6035*HBL60CM35*HBL6036*Same as above except yellow.HBL60CM36*Notes:See pages B-70 <strong>and</strong> B-71 for accessories.HP ratings are for receptacles <strong>and</strong> plugs only <strong>and</strong> up to 480V AC only.HP ratings are AC only.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.For technical information see page B-83.** Not UL Listed.XXZWYNEMA L18-20R20A 3ØY120/208V ACUL Listed2 HPWYXZNEMA L19-20R20A 3ØY277/480V ACUL Listed5 HPXYWWZNEMA L20-20R20A 3ØY347/600V ACUL ListedYXXYWB-48 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 4 Wire Non-Grounding30 Ampere, 3Ø Y 120/208, 277/480 <strong>and</strong> 347/600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsFSFed.Spec.Single Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2750 HBL2760 HBL2770Not Fed Spec.Insulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2753 HBL2763 HBL2773Note: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2756 HBL2766 HBL2776Insulgrip Plugs IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2751 HBL2761 HBL2771Note: Cord clamp range .35”-1.15” (9-29).See page B-73 for Add-A-Shroud kit.WYXInsulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2755 HBL2765 HBL2775Notes: Horsepower ratings are for receptacles <strong>and</strong> plugs only <strong>and</strong> up to 480V AC only.See pages B-70 <strong>and</strong> B-71 for accessories.For technical information see page B-83.XYZNEMA L18-30R30A 3ØY120/208V ACUL Listed3 HPWZNEMA L18-30P30A 3ØY120/208V ACUL Listed3 HPWYXXYZNEMA L19-30R30A 3ØY277/480V ACUL Listed10 HPWZNEMA L19-30P30A 3ØY277/480V ACUL Listed10 HPWYXXYZNEMA L20-30R30A 3ØY347/600V ACUL ListedWZNEMA L20-30P30A 3ØY347/600V ACUL Listed2.33"(59.2)2.67"(67.8).19"(4.8)DIA.2.21"(56.1).19"(4.8)DIA.1.70"(43.2)HBL2750120°120°3.86"(98.0)HBL27533.06"(77.7)120°2.23"(56.6)HBL2756HBL27513.06"(77.7)120°2.75"(69.9)2.23"(56.6)HBL27551.23"(31.2)1.56" 2.38"(39.6) (60.5) (83.3)3.28"#6-32 TAP.98"(24.9)2.27"(57.7)2.27"(57.7)1.34" R(34.0)1.34" R(34.0)2.21"(56.1)2.33"(59.2)Locking <strong>Devices</strong> 4P 4W, 30A, 3ØY 120/208, 277/480 <strong>and</strong> 347/600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-49
4P 4W, 20 <strong>and</strong> 30A, 3ØY 120/208V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 4 Wire Non-Grounding20 <strong>and</strong> 30 Ampere, 3Ø Y 120/208 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.50"(63.5)2.33"(59.2)2.69"(68.3).19"(4.8)DIA.2.21"(56.1)1.71"(43.4)#6-32 TAP1.28"(32.0)HBL7410B1.36"(34.6)#6-32 TAP1.13"(28.7)HBL3430120°1.71"(43.4)3.86"(98.0)HBL7413C3.06"(77.7)120°1.05" (26.7)2.23"(56.6)HBL7409C2.75"(69.9)HBL7411C1.57"(39.8) 2.38"(60.5) 3.61"(91.7)1.57"(39.8) (83.3) 3.28"(91.7)3.61"1.34" R(34.0)2.27"(57.7)2.21"(56.1)2.33"(59.2)ReceptaclesDescriptionCatalog NumbersBlack urea, back wired. HBL7410B HBL3430Mounted on a 4” (101.6) round metal cover. HBL7417B –Not Fed SpecInsulgrip Connector BodiesDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL7413C HBL3433CNote: Cord grip range for devices .35”-1.15” (9-29).Insulgrip Flanged ReceptacleDescriptionCatalog NumberNylon casing, back wired. HBL7409C –Insulgrip PlugsDescriptionIP20 SUITABILITYCatalog NumbersBlack <strong>and</strong> white nylon. HBL7411C HBL3431CNotes: Cord grip range for devices .35”-1.15” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletDescriptionCatalog NumberNylon casing, back wired. HBL7408C –Notes: See pages B-70 <strong>and</strong> B-71 for accessories.For technical information on Insulgrip plugs, connector bodies <strong>and</strong> flangeddevices see page B-83..19"(4.8)DIA.120°For Replacement Use Only3.06"(77.7)120°2.23"(56.6)HBL7408C2.27"(57.7)1.34" R(34.0)ZXWYWXNon-NEMA20A 3Ø Y120/208V ACUL ListedZYNon-NEMA20A 3Ø Y120/208V ACUL ListedYNon-NEMA30A 3Ø Y120/208V ACUL ListedWZXZWYXNon-NEMA30A 3Ø Y120/208V ACUL ListedCAUTION: To avoid electrical shock, reviewpremises carefully <strong>and</strong> do not use if slot or bladeconfiguration (design) is already in a circuithaving a rating differing from the rating of thisdevice.B-50 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding20 Ampere, 3Ø Y 120/208, 277/480 <strong>and</strong> 347/600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2510 HBL2520* HBL2530*Isolated ground, orange nylon face. IG2510 – –*Not Fed SpecInsulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2513 HBL2523 HBL2533Corrosion resistant, yellow nylon. HBL25CM13 – –Note: Cord grip range .35”-1.15” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2516 HBL2526 HBL2536Insulgrip Plugs IP20 SUITABILITYDescriptionFSFed.Spec.Catalog NumbersBlack <strong>and</strong> white nylon. HBL2511 HBL2521 HBL2531Corrosion resistant, yellow nylon. HBL25CM11 – –Note: Cord grip range .35”-1.15” (9-29).Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2515 HBL2525 HBL2535Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.HP ratings for receptacles <strong>and</strong> plugs only.All HP rating are AC only.See pages B-70 <strong>and</strong> B-71 for accessories.See page B-83 for technical data.See page B-63 for switched enclosure.YWGXZXZGWYNEMA L21-20R20A 3ØY120/208V ACUL/CSA2 HPNEMA L21-20P20A 3ØY120/208V ACUL/CSAYWGXZXZGWYNEMA L22-20R20A 3ØY277/480V ACUL/CSA5 HPNEMA L22-20P20A 3ØY277/480V ACUL/CSA5 HPYWGXXZGWYNEMA L23-20R20A 3ØY347/600V ACUL/CSAZNEMA L23-20P20A 3ØY347/600V ACUL/CSA2.33"(59.3)2.67"(67.8).98"(24.9).19"(4.8)DIA.2.21"(56.1).19"(4.8)DIA.120°120°1.70"(43.2)HBL25103.86"(98.0)HBL25133.06"(77.7)120°2.23"(56.6)HBL25162.75"(69.8)HBL25113.06"(77.7)120°2.23"(56.6)HBL25151.56" 2.38"(39.6) (60.5) (83.3)3.28"#6-32 TAP1.23"(31.2)2.27"(57.7)2.27"(57.7)2.21"(56.1)1.34" R(34.0)2.33"(59.2)1.34" R(34.0)Locking <strong>Devices</strong> 4P 5W, 20A, 3ØY 120/208, 277/480 <strong>and</strong> 347/600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-51
4P 5W, 20A, 3ØY 120/208V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding20 Ampere, 3Ø Y 120/208 Volts ACWatertight Safety-Shroud <strong>TWIST</strong>-LOCK ® System3.75"(95.3)2.75"(69.9)2.94"(74.7)3.75"(95.3)2.91"(73.9)3.75"(95.3)HBL2510SW4.38"(111.1)HBL2813SWHBL2513SWHBL2511SW2.44"(62.0)3.75"(95.3)HBL2815SWHBL2515SW4.50"(114.3)1.81"(46.0)1.75"(44.5)FUL Listed, CSACertified to Type 4,4X, & 12Watertight Safety-ShroudReceptacle, Back WiredDescriptionGray Valox ® housing <strong>and</strong> flange.Note: Receptacles only fit boxes listed on page B-72.Watertight Safety-ShroudConnector BodyDescriptionBlack Valox housing, white Valox clamps.Watertight Safety-Shroud PlugDescriptionSFed.Spec.Black Valox housing, white Valox clamps.Watertight Safety-ShroudFlanged InletDescriptionGray Valox housing <strong>and</strong> flange.Notes: Cord grip range for plugs <strong>and</strong> connector bodies.35”-1.15” (9-29), #16-5 Type S, SO to #8-5 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® Unfused Safety-ShroudMechanical Interlock for Twist-Lock ReceptaclesDescriptionMechanical Interlock accommodates 20A <strong>and</strong> 30Awatertight safety shroud receptacles.Note: *See pages B-64 <strong>and</strong> B-65 for complete details.®Valox is a registered trademark of General Electric Company.WNEMA L21-20R20A 3ØY120/208V ACUL/CSA2 HPCatalog NumberHBL2510SWCatalog NumberHBL2513SWYGXZXZGYWNEMA L21-20P20A 3ØY120/208V ACUL/CSA2 HPCatalog NumberHBL2511SWCatalog NumberHBL2515SWCatalog NumberHBLMITL*IP66SUITABILITYB-52 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding20 Ampere, 3Ø Y 120/208 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® SystemFSafety-ShroudTwist-Lock ReceptaclesDescriptionAngle housing one gang.Surface mounting one gang.SFed.Spec.Semi-flush two gang.Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange gray Valox ® .Insulgrip Connector BodyDescriptionBlack <strong>and</strong> white nylon.Note: Cord clamp range .35 “-1.15” (9-29).IP20 SUITABILITYSafety-Shroud Twist-Lock PlugDescriptionBlack <strong>and</strong> white nylon body, White Valox shroud.Note: Cord clamp range .35”-1.15 “ (9-29).IP20 SUITABILITYInsulgrip Flanged InletDescriptionNylon casing, back wired.Notes: Only receptacle <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.For technical information, see page B-83.WCatalog NumbersHBL2510ARHBL2510SRHBL2510SR2WCatalog NumberHBL2513YCatalog NumberHBL2511SYXZGGXZXZXGGYWZNEMA L21-20P20A 3ØY120/208V ACUL/CSACatalog NumberYNEMA L21-20R20A 3ØY120/208V ACUL/CSA2 HPNEMA L21-20R20A 3ØY120/208V ACUL/CSAWNEMA L21-20P20A 3ØY120/208V ACUL/CSA2 HPHBL25152.33"(59.3)2.21"(56.1)4.56"(115.8)5.12"(130.0)3.14"(79.8)2.88"(73.2)HBL2510AR HBL2810AR2.84"(72.1)HBL2510SR5.12"(130.0)3.86"(98.0)HBL25134.12"(104.6)1.71"(43.4)HBL2510SR2HBL2511S4.57"(116.1).77"(19.6)2.21"(56.1)2.33"(59.3)Locking <strong>Devices</strong> 4P 5W, 20A, 3ØY 120/208V AC®Valox is a registered trademark of General Electric Company.Dimensions in Inches (mm)www.hubbell-wiring.comB-53
4P 5W, 30A, 3ØY 120/208, 277/480 <strong>and</strong> 347/600V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding30 Ampere, 3Ø Y 120/208, 277/480 <strong>and</strong> 347/600 Volts ACReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> Plugs2.33"(59.3)2.67"(67.8)#6-32 TAP.19"(4.8)DIA.2.21"(56.1).19"(4.8)DIA.HBL2810120°120°1.70"(43.2)3.86"(98.0)HBL28133.06"(77.7)120°2.23"(56.6)HBL2816HBL28113.06"(77.7)120°2.23"(56.6)HBL28151.56"(39.6) (60.5) 2.38"(83.3)3.28"2.75"(69.9)1.23"(31.2).98"(24.9)2.27"(57.7)2.27"(57.2)2.21"(56.1)1.34" R(34.0)1.34" R(34.0)2.33"(59.2)FSingle Flush Receptacles,Back <strong>and</strong> Side WiredDescriptionCatalog NumbersBlack nylon face. HBL2810 HBL2820 HBL2830Isolated ground, orange nylon face. IG2810 – –Insulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL2813 HBL2823 HBL2833Corrosion resistant, yellow nylon. HBL28CM13 – –Note: Cord grip range .35”-1.15” (9-29).Insulgrip Flanged ReceptaclesDescriptionCatalog NumbersNylon casing, back wired. HBL2816 HBL2826 HBL2836Insulgrip Plugs IP20 SUITABILITYDescriptionSFed.Spec.Catalog NumbersZNEMA L22-30P30A 3ØY277/480V ACUL/CSA10 HPZNEMA L23-30P30A 3ØY347/600V ACUL/CSABlack <strong>and</strong> white nylon. HBL2811 HBL2821 HBL2831Corrosion resistant, yellow nylon. HBL28CM11 – –Notes: Grip range .35”-1.15” (9-29).See page B-73 for Add-A-Shroud kit.Insulgrip Flanged InletsDescriptionCatalog NumbersNylon casing, back wired. HBL2815 HBL2825 HBL2835Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.HP rating are AC only.See pages B-70 <strong>and</strong> B-71 for accessories.For technical information see page B-83.See page B-63 for a switched enclosure.WYGXXGYZNEMA L21-30R30A 3ØY120/208V ACUL/CSA3 HPWZNEMA L21-30P30A 3ØY120/208V ACUL/CSA3 HPWYGXZNEMA L22-30R30A 3ØY277/480V ACUL/CSA10 HPXGYWWZNEMA L23-30R30A 3ØY347/600V ACUL/CSAYGXXGYWB-54 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire30 Ampere, 3Ø Y 120/208 Volts ACWatertight Safety-Shroud Twist-Lock ® SystemFUL Listed, CSA Certified to Type 4, 4X, & 12KWatertight Safety-ShroudTwist-Lock ReceptacleDescriptionGray Valox ® housing <strong>and</strong> flange.Note: Receptacles only fit boxes listed on page B-72.Watertight Safety-ShroudConnector BodyDescriptionBlack Valox housing, white Valox clamps.Watertight Safety-Shroud PlugDescriptionSFed.Spec.Black Valox housing, white Valox clamps.Watertight Safety-ShroudFlanged InletDescriptionGray Valox housing <strong>and</strong> flange.Notes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.HP ratings are AC only.Cord grip range for plugs <strong>and</strong> connector bodies.35”-1.15 ” (9-29), #16-5 Type S, SO to #8-5 Type S, SO.For technical information see page B-84.CIRCUIT-LOCK ® Unfused Safety-ShroudMechanical Interlock for Twist-Lock ReceptaclesDescriptionMechanical Interlock accommodates 20A <strong>and</strong> 30Awatertight Safety-Shroud receptacles.Note: *Not shown, see pages B-64 <strong>and</strong> B-65 for complete details.®Valox is a registered trademark of General Electric Company.WCatalog NumberHBL2810SWCatalog NumberHBL2813SWYGXZXZGYNEMA L21-30R30A 3ØY120/208V ACUL/CSA3 HPWNEMA L21-30P30A 3ØY120/208V ACUL/CSA3 HPCatalog NumberHBL2811SWCatalog NumberHBL2815SWCatalog NumberHBLMITL*IP66SUITABILITY3.75"(95.3)2.75"(69.9)2.94"(74.7)3.75"(95.3)2.91"(73.9)3.75"(95.3)HBL2810SW4.38"(111.1)HBL2813SWHBL2811SW2.44"(62.0)3.75"(95.3)HBL2815SW4.50"(114.3)1.75"(44.5)1.81"(46.0)Locking <strong>Devices</strong> 4P 5W, 30A, 3ØY 120/208V ACDimensions in Inches (mm)www.hubbell-wiring.comB-55
4P 5W, 30A, 3ØY 120/208V AC Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding30 Ampere, 3Ø Y 120/208 Volts ACSafety-Shroud <strong>TWIST</strong>-LOCK ® System2.33"(59.3)2.21"(56.1)5.12"(130.0)2.88"(73.2)HBL2810AR4.56"(115.8)3.14"(79.8)5.12"(130.0)HBL2810SR23.86"(98.0)HBL28131.71"(43.4)2.84"(72.1)HBL2810SR4.12"(104.6)HBL2811S4.57"(116.1).77"(19.6)2.21"(56.1)2.33"(59.3)FSFed.Spec.Safety-ShroudTwist-Lock ReceptaclesDescriptionAngle housing one gang.Surface mounting one gang.Semi-flush two gang.Notes: See page B-72 for box mounting application.Housing <strong>and</strong> flange, gray Valox ® .Insulgrip Connector BodyDescriptionBlack <strong>and</strong> white nylon.Note: Cord clamp range .35”-1.15” (9-29).IP20 SUITABILITYSafety-Shroud Twist-Lock PlugDescriptionBlack <strong>and</strong> white nylon body, white Valox shroud.Note: Cord clamp range .35”-1.15” (9-29).Insulgrip Flanged InletDescriptionNylon casing, back wired.IP20 SUITABILITYNotes: Only receptacles <strong>and</strong> plugs 480V AC or less are HP rated.All HP ratings are AC only.For technical information, see page B-83.®Valox is a registered trademark of General Electric Company.Catalog NumbersHBL2810ARHBL2810SRHBL2810SR2WCatalog NumberHBL2813Catalog NumberHBL2811SYWYNEMA L21-30P30A 3ØY120/208V ACUL/CSA3 HPGXZNEMA L21-30R30A 3ØY120/208V ACUL/CSAGXZXXZGGYNEMA L21-30R30A 3ØY120/208V ACUL/CSA3 HPYWWZNEMA L21-30P30A 3ØY120/208V ACUL/CSACatalog NumberHBL2815B-56 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding20 Ampere, 250 Volts, 10 Ampere, 600 Volts ACReceptacle, INSULGRIP ® Plug <strong>and</strong> Connector BodyReceptacleDescriptionCatalog NumberBlack urea, back wired. HBL3520 –Insulgrip Plug IP20 SUITABILITYDescriptionCatalog NumberBlack <strong>and</strong> white nylon. – HBL3521CInsulgrip Connector Body IP20 SUITABILITYDescriptionCatalog NumberBlack <strong>and</strong> white nylon. HBL3523C –Insulgrip Flanged InletDescriptionCatalog NumberNylon casing, back wired. – HBL3525CInsulgrip Flanged ReceptacleDescriptionFor Replacement Use OnlyCatalog NumberNylon casing, back wired. HBL3524C –Notes: Cord grip range for plug <strong>and</strong> connector body .35”-1.15” (9-29).See pages B-70 <strong>and</strong> B-71 for accessories.For technical information on Insulgrip plug <strong>and</strong> connector body see page B-83.CAUTION: To avoid electrical shock, reviewpremises carefully <strong>and</strong> do not use if slot or bladeconfiguration (design) is already in a circuithaving a rating differing from the rating of thisdevice.YZXWGRNon-NEMA20A 250V10A 600V ACUL/CSAGRWZXYNon-NEMA20A 250V10A 600V ACUL/CSA3.61" 2.38" 1.57"(91.7) (60.5) (39.8)2.21"(56.1)2.33"(59.2).19"(4.8)DIA..19"(4.8)DIA.#6-32 TAP1201201.71"(43.4)HBL35202.75"(69.9)HBL3521C3.86"(98.0)HBL3523C3.06"(77.7)1202.23"(56.6)HBL3525C3.06"(77.7)1202.23"(56.6)HBL3524C2.27"(57.7)2.27"(57.7)2.50"(63.5)2.33"(59.2)2.21"(56.1)1.34" R(34.0)1.34" R(34.0)Locking <strong>Devices</strong> 4P 5W, 20A, 250V, 10A 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-57
4P 5W, Variload <strong>Devices</strong> Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>4 Pole 5 Wire Grounding30 Ampere, 250 Volts; 30 Ampere, 600 Volts AC <strong>and</strong> 20 Ampere, 3Ø Y 120/208 Volts AC 400HzVARILOAD ® <strong>TWIST</strong>-LOCK ® Receptacles, Plugs, Connector Bodies <strong>and</strong>Flanged Inlets3.28"(83.3) (60.5) 2.38"(43.7)1.72"2.13"(54.1)DIA..91"(23.1)#6-32 TAP1.72"(43.7)HBL453051.86"(47.2)HBL453152.89"(73.4)HBL453351.02"(25.9)2.13"(54.1)DIA..91"(23.1)2.69"(68.3)1.27"(32.3)1.84"(46.7)DIA.In many large plants <strong>and</strong> laboratories the number of circuits ofdifferent ratings <strong>and</strong> frequency is greater than the number of bladeconfigurations available in conventional wiring devices.Prior to NEMA configuration st<strong>and</strong>ardization the solution was“Variload Twist-Lock” devices with four non-interchangeable centerpin <strong>and</strong> slot configurations that can be designated to differentcircuits.30A, 250V AC/DC 30A, 600V ACCenter Pin Connector FlangedConfiguration Receptacles Plugs Bodies Inlets20A 120/208V 3Ø Y, 400 HzAccessoriesPlatesDescriptionBrass, single-gang.Stainless steel, single-gang.Weatherproof BootsDescriptionHBL45105 HBL45115 HBL45135 –HBL45205 HBL45215 HBL45235 –HBL45305 HBL45315 HBL45335 –HBL45905 HBL45915 HBL45935 HBL45985CLIP55** SUITABILITYSeal-Tite black elastomer for Variload plugs.Catalog NumbersB725S725Catalog NumbersHBL6027*Seal-Tite, black elastomer for Variload connector bodies.HBL6028*Note: **When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.* Not UL Listed.CAUTION: To avoid electrical shock, reviewpremises carefully <strong>and</strong> do not use if slot or bladeconfiguration (design) is already in a circuithaving a rating differing from the rating of thisdevice.B-58 www.hubbell-wiring.comDimensions in Inches (mm)
Not UL Listed, <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 3 Wire <strong>and</strong> 2 Pole 3 Wire10 Ampere, 250 Volts, 15 Ampere 125 VoltsReceptacles, INSULGRIP ® Connector Bodies, Flanged <strong>Devices</strong> <strong>and</strong> PlugsFor Replacement Use OnlyNot GroundedGroundedReceptaclesNot UL listedNot UL listedDescriptionCatalog NumbersDuplex, black RTP*. HBL7580 HBL7580GSingle, black phenolic. HBL7582 HBL7582GConnector BodiesDescriptionIP20 SUITABILITYCatalog NumbersInsulgrip connector, black <strong>and</strong> white nylon, HBL7565C –multiple drive screws.Insulgrip connector, yellow <strong>and</strong> white nylon, HBL7565CY –multiple drive screws.Black phenolic. HBL7555 HBL7555GNotes: Cord grip range .230”-.720” (5.8-18.3).HBL7555 cord grip range .296”-.625” (7.5-15.9).Flanged ReceptaclesDescriptionCatalog NumbersStainless steel casing. HBL7557 HBL7557GInsulgrip PlugsDescriptionIP20 SUITABILITY3 Pole3 WireNot GroundedNot UL listedCatalog NumbersBlack <strong>and</strong> white nylon, multiple drive screws. HBL7567C –Yellow <strong>and</strong> white nylon, multiple drive screws. HBL7567CY –Note: Cord grip range .230”-.720” (5.8-18.3).Flanged InletsDescriptionCatalog NumbersStainless steel casing. HBL7556 HBL7556GNotes: See pages B-66 <strong>and</strong> B-67 for accessories.For technical information on Insulgrip connector bodies <strong>and</strong> plugs see page B-83.The devices shown on this page are not listed by Underwriters Laboratories Inc.<strong>and</strong> are for replacement use only in existing installations.*RTP is an abbreviation for reinforced thermoplastic.CAUTION: To avoid electrical shock, review premises carefully<strong>and</strong> do not use if slot or blade configuration (design) is already ina circuit having a rating differing from the rating of this device.CUCU2 Pole3 WireCUCUGroundedNot UL listedGR1.53"(38.9)3.28"(83.3).16"(4.1).16"(4.1)Dia.1.70"(43.2)HBL75802.78"(70.6)HBL7565C2.31"(58.7)1.94"(49.3)1.50"(38.1)HBL75571.91"(48.5)HBL7567C2.31"(58.7)1.94"(49.3)1.50"(38.1)HBL75562.735"(69.5)1.75"(44.4)1.34"(34.0)1.53"(38.9)1.41"(35.8)1.75"(44.4)1.13"(28.7)Locking <strong>Devices</strong> Not UL Listed <strong>Devices</strong> 3P 3W, 10A, 250V, 15A, 125VDimensions in Inches (mm)www.hubbell-wiring.comB-59
Not UL Listed 2P 3W, 20 <strong>and</strong> 30A, 250V Locking <strong>Devices</strong>Not UL Listed <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 <strong>and</strong> 30 Ampere, 250 VoltsReceptacles, INSULGRIP ® Connector Bodies <strong>and</strong> Plugs#6-32TAP2.26"(57.4)2.50"(63.5)1.97"(50.0)#6-32TAP2.38"3.28" (60.5) 1.38"(83.3) (34.9)1.71"(43.1)1.28"(32.5)HBL3330G1.28"(32.6)HBL7310BG3.86"(98.0)HBL7314GCB2.75"(69.9)1.05"(26.7)1.22"(31.0)HBL9965GCB2.20" 3.61"(55.9) (91.6)1.57"(39.8)(60.5) 2.38"(91.6)3.61".97" (24.6)1.97"(50.0)2.26"(57.4)For Replacement Use OnlySingle Flush ReceptaclesDescriptionCatalog NumbersBlack urea, back wired. HBL7310BG HBL3330GInsulgrip Connector BodiesDescriptionBlack <strong>and</strong> white nylon.Insulgrip PlugsDescriptionIP20 SUITABILITYIP20 SUITABILITY20A 250VNon-NEMANot UL ListedCatalog NumbersHBL7314GCB HBL3333GC20A 250VNon-NEMANot UL ListedCatalog NumbersCU30A 250VNon NEMANot UL listedBlack <strong>and</strong> white nylon.HBL9965GCB HBL3331GCNotes: Cord grip range .360”-930” (9-24).See pages B-68 <strong>and</strong> B-69 for accessories.For technical information on Insulgrip connector bodies <strong>and</strong> plugs see page B-83.The devices shown on this page are not listed by Underwriters Laboratories Inc.<strong>and</strong> are for replacement use only in existing installations.GRCU30A 250VNon NEMANot UL listedCAUTION: To avoid electrical shock, review premises carefully <strong>and</strong> do notuse if slot or blade configuration (design) is already in a circuit having arating differing from the rating of this device.CUGRGRCUGRB-60 www.hubbell-wiring.comDimensions in Inches (mm)
Not UL Listed <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>3 Pole, 4 Wire20 <strong>and</strong> 30 Ampere, 250 Volts ACReceptacles, INSULGRIP ® Connector Bodies <strong>and</strong> PlugsFor Replacement Use OnlySingle Flush ReceptaclesDescriptionCatalog NumbersBlack phenolic, back <strong>and</strong> side wired. HBL7410BG HBL3430GInsulgrip Connector Bodies IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL7413GCB HBL3433GCBInsulgrip Plugs IP20 SUITABILITYDescriptionCatalog NumbersBlack <strong>and</strong> white nylon. HBL7411GCB HBL3431GCBNotes: Cord grip range .350”-1.150” (9-29).See pages B-70 <strong>and</strong> B-71 for accessories.For technical information on Insulgrip connector bodies <strong>and</strong> plugssee page B-83.The devices shown on this page are not listed by Underwriters LaboratoriesInc. <strong>and</strong> are for replacement use only in existing installations.ZYX20A 250V ACNon-NEMANot UL ListedGR20A 250V ACNon-NEMANot UL ListedCAUTION: To avoid electrical shock, review premises carefully <strong>and</strong> donot use if slot or blade configuration (design) is already in a circuithaving a rating differing from the rating of this device.GRXYZYZX30A 250V ACNon-NEMANot UL ListedGRZXGRY30A 250V ACNon-NEMANot UL Listed1.57"(39.8)2.50"(63.5)2.33"(59.2)2.21"(56.1)HBL7410BG1.36"(34.5)1.71"(43.4)1.28"(32.6)1.05"(26.7)1.71"(43.4)2.50" 2.38"(63.5) (60.5)(91.6)3.61"#6-32 TAP#6-32 TAP1.13"(28.7)HBL3430G3.86"(98.0)1.57"(39.8) (60.5) 2.38"(83.3)3.28"HBL7413GCB2.75"(69.9)HBL7411GCB2.33"(59.2)2.21"(56.1)Locking <strong>Devices</strong> Not UL Listed 3P 4W, 20 & 30A, 250V ACDimensions in Inches (mm)www.hubbell-wiring.comB-61
Switched Enclosures Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Switched Safety EnclosuresSwitched <strong>TWIST</strong>-LOCK ® <strong>and</strong> HUBBELLOCK ® EnclosuresLockable h<strong>and</strong>le provides lockoutprotection for greater safety <strong>and</strong>complies with OSHA lockoutrequirements.Premolded conduit entry holeis offset to prevent watercondensation from fallingdirectly on interior electricalcomponents, while speedinginstallation by making it easierto pull conductors.<strong>Hubbell</strong> innovation delivers again.The Switched Twist-Lock <strong>and</strong><strong>Hubbell</strong>ock Enclosures integrate areceptacle <strong>and</strong> a switch to producedistinct advantages for the user.This enclosure replaces box,switch, cover <strong>and</strong> all in a compactdesign that meets Type 3RRainproof or 12K Dust-tightrequirements. The receptacle isangled downward for a low profile,<strong>and</strong> it maintains a low profile whileaccommodating either a 20 or 30Amp Twist-Lock receptacle or 30Amp, 4 wire <strong>Hubbell</strong>ock receptacle.Heavy-duty internal framebonds conduit <strong>and</strong> all grounds<strong>and</strong> has a DIN rail toaccommodate the switch.Horsepower rated switch.Moveable feet may be usedin horizontal or vertical positionor may be removed <strong>and</strong>premarked holes drilled forType 1 or 3R installations.The enclosure can be used in top,bottom or back feed applications.The h<strong>and</strong>le is designed to belocked in the off position for lockoutprotection.<strong>Hubbell</strong> has developed theSwitched Safety Enclosurebecause users want to be able todisconnect higher voltage devicesconfidently. <strong>Hubbell</strong> responded witha line of Switched SafetyEnclosures for Twist-Lock <strong>and</strong><strong>Hubbell</strong>ock receptacles. Theprovision of the integral switch <strong>and</strong>Angled 20 or 30 Amp <strong>Hubbell</strong>Twist-Lock receptacle provideslow profile <strong>and</strong> helps controlcable arc of bend.Large receptacle gasketlessdoor <strong>and</strong> hinge assembly.the receptacle in a compact, nonmetallicenclosure encourages thesafe operating practice ofdisconnecting at the switch ratherthan the plug <strong>and</strong> receptacle.For plants <strong>and</strong> factories in a widevariety of industries, as well as lightindustrial facilities, <strong>Hubbell</strong>’sSwitched Enclosures offer anupgrade that’s convenient,compact <strong>and</strong> easy to install.B-62 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Switched EnclosureSwitched <strong>TWIST</strong>-LOCK ® <strong>and</strong> HUBBELLOCK ® EnclosuresUL Listed, CSA CertifiedType 3R <strong>and</strong> 12K Enclosure RatingSwitched Enclosure Ready for Twist-Lock ® Receptacle AdditionIdeal unit for stockroom. This single unit provides the completeenclosure ready to accept any <strong>Hubbell</strong> 20 or 30A Twist-Lockreceptacle.Description Ratings Catalog NumbersSwitched Twist-Lock enclosure Amperage, voltage, <strong>and</strong>SETL3accommodates any NEMA horsepower ratings will be2 pole, 3 wire to 4 pole, 5 wire determined by the choice of thegrounding receptacle (sold NEMA 20 or 30A Twist-Lockseparately).receptacle selected.Auxiliary contact. Break after break NO/NC. HBLAC1Auxiliary contact. Break before break NO/NC. HBLAC2Switched Enclosure Complete withTwist-Lock ReceptacleCompletely pre-wired with a Twist-Lock receptacle, these applicationoriented combinations are available to satisfy your needs.Use SwitchedTwist- EnclosureNEMA Amp- Lock CatalogDescription Config. erage Voltage Horsepower Plug NumbersSwitched Twist-Lock L15-30R 30 3Ø 240V AC 3 HBL2721 SE2720Aenclosure with aprewired HBL2720receptacle.Switched Twist-Lock L16-30R 30 3Ø 480V AC 5 HBL2731 SE2730Aenclosure with aprewired HBL2730receptacle.Switched Enclosure Ready for <strong>Hubbell</strong>ock Receptacle AdditionIdeal unit for stockroom. This single unit provides the completeenclosure ready to accept your 30A, 4 wire <strong>Hubbell</strong>ock receptaclechoice.Description Ratings Catalog NumbersSwitched enclosure for use Amperage, voltage, <strong>and</strong> SEHBL3with 3 pole 4 wire 30A horsepower ratings will be<strong>Hubbell</strong>ock receptacle determined by the choice of the(sold separately).4 wire <strong>Hubbell</strong>ock receptacleselected.Auxiliary contact. Break after break NO/NC. HBLAC1Auxiliary contact. Break before break NO/NC. HBLAC2IP54SUITABILITYSwitchedTwist-Lock ®EnclosurePSJO IST OTNCAT. NO. XXXXXXSSFIT ISTI EWRQ QQFIT TIEH SALAKJ SKAOFFONCAUTION: Saitiew ietioeta sitiebowtosntownf wthuil sothe othes otistelsls tiesntofoenls.ATTENTION: Alsritwheta dithe otehlsothe toehs wopt thlslei toen l s lsjteloetyhenl iteh sithe ithelsl tihehh l.SETL34.88"(124.0)4.5"(114.3)11.38"(289.1)Locking <strong>Devices</strong> Switched EnclosuresDimensions in Inches (mm)www.hubbell-wiring.comB-63
Mechanical Interlock Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Switched Safety EnclosuresCIRCUIT-LOCK ® Unfused Safety-Shroud <strong>TWIST</strong>-LOCK ®Mechanical InterlockLockable h<strong>and</strong>le provides lockout protection for greater safety<strong>and</strong> compliance with OSHA lockout requirements.Heavy-duty interlock linkageprevents make <strong>and</strong> breakunder load.Horsepower rated switch.Heavy-duty internal frame bonds conduit<strong>and</strong> all grounds <strong>and</strong> has a DIN rail toaccommodate the switch.<strong>Hubbell</strong> offers the only mechanicalinterlock for Twist-Lock. This new,unfused mechanical interlock forwatertight Safety-Shroud Twist-Lock integrates a watertightreceptacle with a linkeddisconnect switch to provide amechanically interlockedreceptacle. This virtuallyeliminates the possibility ofmaking or breaking the circuitwhile under load or making aMoveable feet may be used inhorizontal or vertical position.casual or “lazy” connection. Theswitch cannot be turned “ON”until the plug is properly inserted<strong>and</strong> locked, <strong>and</strong> the plug cannotbe removed until the switch isturned “OFF.” All these protectivefeatures are included in acompact Type 4X hose-directedwater <strong>and</strong> corrosion resistantenclosure that allows for top,bottom or back feed options.The non-metallic enclosure isnonconductive, yet has anAngled 20 or 30 Amp <strong>Hubbell</strong> WatertightSafety-Shroud Twist-Lock receptacle provideswatertight, low profile <strong>and</strong> mechanicalinterlock capabilities.Enclosure back isdesigned for top,bottom or backfeed options.Premolded conduit entry hole is offset to prevent watercondensation from falling directly on interior electricalcomponents. Also speeds installation by making it easierto pull conductors.internal frame to assure groundcontinuity with metallic conduit.In addition, this interlock workswith all Safety-Shroud Twist-Lock plugs. The new unfusedmechanical interlock forwatertight Safety-Shroud Twist-Lock can be locked out as amethod of compliance withOSHA lockout/tagoutregulations.B-64 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK <strong>Devices</strong>Switched EnclosureCIRCUIT-LOCK Unfused Safety Shroud <strong>TWIST</strong>-LOCK ®Mechanical InterlockUL Listed, CSA Certified TYPE 4,4X <strong>and</strong> TYPE 12K Enclosure RatingOrdering InformationThis unit is a complete enclosure ready to accept any 20 or 30A watertightSafety-Shroud Twist-Lock receptacle.Description Ratings Catalog NumberMechanical Interlock Amperage, voltage <strong>and</strong> HP ratings HBLMITLaccommodates 20A or 30A will be determined by the choicewatertight Safety-Shroud of the watertight Safety-ShroudTwist-Lock receptacles. Twist-Lock selected. Suppiled With 3/4” Hub.Accepts the following watertight Safety-Shroud Twist-Lock receptacles:20AUse WatertightNEMA Config. Max. Safety Shroud ReceptacleVoltage Reference HP Twist-Lock CatalogRating AC Number Rating Plug Cat. No. Numbers2 Pole, 3 Wire 120 L5-20 1 HBL2311SW HBL2310SW208-240 L6-20 2.5 HBL2321SW HBL2320SW277 L7-20 3 HBL2331SW HBL2330SW3 Pole, 4 Wire 120/240 L14-20 2.5 HBL2411SW HBL2410SW240 3Ø L15-20 5 (3@208V) HBL2421SW HBL2420SW480 3Ø L16-20 10 HBL2431SW HBL2430SW4 Pole, 5 Wire 120/208 3ØY L21-20 3 HBL2511SW HBL2510SW30AUse WatertightNEMA Config. Max. Safety Shroud ReceptacleVoltage Reference HP Twist-Lock CatalogRating AC Number Rating Plug Cat. No. Numbers2 Pole, 3 Wire 120 L5-30 1 HBL2611SW HBL2610SW208-240 L6-30 2.5 HBL2621SW HBL2620SW3 Pole, 4 Wire 120/240 L14-30 2.5 HBL2711SW HBL2710SW240 3Ø L15-30 5 HBL2721SW HBL2720SW480 3Ø L16-30 10 HBL2731SW HBL2730SW600 3Ø L17-30 * HBL2741SW HBL2740SW4 Pole, 5 Wire 120/208 3ØY L21-30 5 HBL2811SW HBL2810SWAuxiliary ContactsDescription Ratings Catalog NumbersAuxiliary contact. Break after break NO/NC. HBLAC1Auxiliary contact. Break before break NO/NC. HBLAC2Replacement PartsDescriptionGround block.Neutral block.Replacement switch.Catalog NumbersHBL30RGBHBL30RNBHBLDS3RS*Notes: HP ratings listed above are AC only.See pages B-70 <strong>and</strong> B71 for accessories.Only receptacles <strong>and</strong> plugs are HP rated <strong>and</strong> up to 480V AC only.For technical information see page B-87.IP66SUITABILITY3.19"(81.0)HBLMITL4.88"(124.0)4.19"(106.4)11.44"(290.6)Locking <strong>Devices</strong> Mechanical InterlockDimensions in Inches (mm)www.hubbell-wiring.comB-65
Accessories Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 15 Ampere 2 <strong>and</strong> 3 Wire Duplex, Single Receptacles <strong>and</strong> Flanged <strong>Devices</strong>P8HBL5206WOHBL5221HBL7423WOWP1P7Single-Gang Wall PlateSingleDuplex Rec. PlatePlate 1.406” (35.7) Dia.DescriptionCatalog NumbersBrown nylon, smooth. P8X P7XIvory nylon, smooth. P8 P7Stainless steel 302/304, smooth. S8 S7Brass, smooth. B8 B7Aluminum, smooth. A8 A7Weatherproof PlatesDescriptionIP44 SUITABILITYCatalog NumbersCast aluminum, for st<strong>and</strong>ard horizontal box mount. HBL5205WO –Same as above except FS/FD box mount. HBL5206WO –Cast aluminum vertical FS/FD box mount. – HBL7420Gray thermoplastic, vertical st<strong>and</strong>ard box mount, HBL5222* –corrosion resistant.Same as above except yellow. HBL52CM22* –Gray thermoplastic, vertical FS/FD box mount, HBL5221* HBL7423WOcorrosion resistant.Yellow thermoplastic, vertical FS/FD box mount, HBL52CM21* HBL74CM23WOcorrosion resistant.White thermoplastic, vertical FS/FD box mount, HBL52CM21W* –corrosion resistant.Weatherproof Plate for15A Flanged Inlets <strong>and</strong> ReceptaclesDescriptionGray thermoplastic, corrosion resistant.IP44 SUITABILITYCatalog NumberWP1Notes: All weatherproof plates listed above are UL Listed for wet <strong>and</strong> damp locationswith cover closed. Those with suffix WO are UL Listed with cover open.See Section K for more information.*IP20 Suitability only.B-66 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 15 Ampere 2 <strong>and</strong> 3 Wire Plugs, Connector Bodies <strong>and</strong> Flanged <strong>Devices</strong>Weatherproof, Seal-Tite ® Triple Seal Bootsfor 15A Insulgrip ® <strong>Devices</strong> IP55* SUITABILITYDescriptionBlack elastomer boot for plugs when used in a cord set <strong>and</strong>connector bodies when used with a flange inlet.Same as above except yellow elastomer.Black elastomer boot for connector bodies when used incord sets.Catalog NumbersHBL6023HBL60CM23HBL6024Same as above except yellow elastomer.HBL60CM24*When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.Closure CoverDescriptionFor use with 3 wire 15A Twist-Lock flush or flanged receptacles.PLUGOUT ® Lockout <strong>Devices</strong>DescriptionLockout device for 15A & 20A straight blade plugs.Catalog NumberHBL7529Catalog NumbersHLDMPLockout device for attachable 20 <strong>and</strong> 30A plugs, straight body HLDor angle types, with or without weatherproof covers.Note: See Section U for more information on PLUGOUT Lockout <strong>Devices</strong>.HBL6023HBL6024HBL75293.14"(79.8)HLDMP4.27"(108.5)HLD4.22"(107.2)7.27"(184.7)Locking <strong>Devices</strong> AccessoriesDimensions in Inches (mm)www.hubbell-wiring.comB-67
Accessories Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 20 <strong>and</strong> 30 Ampere 3, 4 <strong>and</strong> 5 Wire Receptacles <strong>and</strong> Flanged <strong>Devices</strong>HBL7425WOAWP2S720HBL2899Single-Gang Wall PlatesDescriptionBlack nylon, smooth.Stainless steel 302/304, smooth.Brass, smooth.Weatherproof PlatesDescriptionIP44 SUITABILITYCast aluminum, for FS/FD box mounting.Rec. Plate1.60” (40.64) Dia.Catalog NumbersP720BS720B720Catalog NumbersHBL7420Gray thermoplastic, for FS/FD box mounting, corrosion resistant. HBL7425WOASame as above except yellow.HBL74CM25WOAWeatherproof Plate forFlanged Inlets <strong>and</strong> Flanged Receptacles IP44 SUITABILITYDescriptionCatalog NumberGray thermoplastic, corrosion resistant.WP2Notes: Weatherproof plates are UL Listed for wet <strong>and</strong> damp location with cover closed.Those with suffix WOA are UL Listed with cover open.Closure Cover for 3 Wire Flanged InletsDescriptionRubber closure plug.Note: Closure cover not UL Listed. Not CSA Certified.Closure Cover for 4 Wire Flanged InletsDescriptionRubber closure plug.Note: Closure cover not UL Listed. Not CSA Certified.Catalog NumberHBL2899Catalog NumberHBL2898B-68 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 20 <strong>and</strong> 30 Ampere, 3 Wire Plugs <strong>and</strong> Connector BodiesWeatherproof, Seal-Tite ® Triple Seal BootsDescriptionBlack elastomer boot for plugs when used in a cord set <strong>and</strong>connector bodies when used in flanged inlets.Same as above except yellow.IP55* SUITABILITYCatalog NumbersHBL6031HBL60CM31Black elastomer boot for connector bodies when used in a cord set. HBL6032Same as above except yellow.Angle AdapterDescriptionNylon, angle adapter for Insulgrip plugs <strong>and</strong> connector bodies,cord grip range .325”-.930” (8.3-24).PLUGOUT ® Lockout <strong>Devices</strong>HBL60CM32Catalog NumberHBL3WAADescriptionCatalog NumbersLockout device for attachable 20 <strong>and</strong> 30A Locking plug HLDstraight body,or angle types, with or without weatherproof covers.Lockout device for 20 <strong>and</strong> 30A 3 wire angle plugsHLD2<strong>and</strong> watertight Safety-Shroud Twist-Lock plugs.Notes: See Section U for more information on PLUGOUT Lockout <strong>Devices</strong>.*When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.Insulgrip Plug <strong>and</strong> Connector Body Latching KitWhen you want to make doubly sure that plugs <strong>and</strong> connectorbodies stay connected, the <strong>Hubbell</strong> latching kit provides bothimproved safety <strong>and</strong> security through a double locking feature thatmakes unintentional disconnection virtually impossible – even underhigh vibration situations. The plug <strong>and</strong> connector body lock oncewhen first connected, then again when you push the special positionlocking slide into place.Insulgrip Latching KitDescriptionFor all 3 wire 20A <strong>and</strong> 30A Twist-Lock Insulgripplugs <strong>and</strong> connectors.Catalog NumberSK24.27"(108.5)HLD7.27"(184.7)HBL6031HBL6032HBL3WAA6.31"(160.3)HLD212.5"(317.5)Locking <strong>Devices</strong> AccessoriesDimensions in Inches (mm)www.hubbell-wiring.comB-69
Accessories Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 20 <strong>and</strong> 30 Ampere, 4 <strong>and</strong> 5 Wire Receptacles <strong>and</strong> Flanged <strong>Devices</strong>S720HBL7425WOAWP2Single-Gang Wall PlatesDescriptionBlack nylon, smooth.Stainless steel 302/304, smooth.Brass, smooth.Weatherproof PlatesDescriptionIP44 SUITABILITYCast aluminum, for FS/FD box mounting.Rec. Plate1.60” (40.64) Dia.Catalog NumbersP720BS720B720Catalog NumbersHBL7420Gray thermoplastic, for FS/FD box mounting, corrosion resistant. HBL7425WOASame as above except yellow.HBL74CM25WOAWeatherproof Plate for Flanged Inlets<strong>and</strong> Flanged Receptacles IP44 SUITABILITYDescriptionCatalog NumberGray thermoplastic, corrosion resistant.WP2Notes: Weatherproof plates are UL Listed for wet <strong>and</strong> damp locations with cover closed.Those with suffix WOA are UL Listed with cover open.B-70 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Accessoriesfor 20 <strong>and</strong> 30 Ampere, 4 <strong>and</strong> 5 Wire Plugs <strong>and</strong> Connector BodiesWeatherproof, Seal-Tite ® Triple Seal BootsDescriptionSeal-Tite triple seal cover for plug when used on a cordset or when used with flush receptacles or connector bodieswhen used with flanged inlets. Black elastomer.Same as above except yellow.Seal-Tite triple seal cover for connector bodies, when used oninterconnecting cord sets. Black elastomer.Same as above except yellow.Angle AdapterDescriptionNylon, angle adapter for Insulgrip plugs <strong>and</strong> connectors,cord grip range .350”-1.15” (8.9-29.2).PLUGOUT ® Lockout DeviceDescriptionIP55* SUITABILITYCatalog NumbersHBL6035HBL60CM35HBL6036HBL60CM36Catalog NumberHBL45WAACatalog NumbersLockout device for attachable 20 <strong>and</strong> 30A plug straightHLDbody or angle types, with or without weatherproof covers.Lockout device for 20 <strong>and</strong> 30A 4 <strong>and</strong> 5 wire angle plugs <strong>and</strong> HLD2watertight Safety-Shroud Twist-Lock plugs.Notes: See Section U for more information on PLUGOUT Lockout <strong>Devices</strong>.*When installed <strong>and</strong> used properly, with plug <strong>and</strong> connector body combinations.Insulgrip Plug <strong>and</strong> Connector Body Latching KitWhen you want to make doubly sure that plugs <strong>and</strong> connectorbodies stay connected, the <strong>Hubbell</strong> latching kit provides bothimproved safety <strong>and</strong> security through a double locking feature thatmakes unintentional disconnection virtually impossible – even underhigh vibration situations. The plug <strong>and</strong> connector body lock oncewhen first connected, then again when you push the special positionlocking slide into place.Insulgrip Latching KitDescriptionFor all 4 <strong>and</strong> 5 wire 20 <strong>and</strong> 30A Twist-Lock Insulgripplugs <strong>and</strong> connectors.SK3Catalog NumbersSK34.27"(108.5)HLD7.27"(184.7)HBL6035HBL6036HBL45WAA6.31"(160.3)HLD212.5"(317.5)Locking <strong>Devices</strong> AccessoriesDimensions in Inches (mm)www.hubbell-wiring.comB-71
Accessories Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Safety-Shroud <strong>TWIST</strong>-LOCK ® AccessoriesFABEDABB2030NACCHBL2030APAA2030PSDE48 CU. IN.EBDAngle BoxFeed-Thru BoxBF3.13"(79.5)CNon-Metallic Back BoxA B C D E F CubicHub Inch Inch Inch Inch Inch Inch Inch CatalogDescription Size (mm) (mm) (mm) (mm) (mm) (mm) Capacity Number15° Angle for 1.0* 5.67 4.44 4.05 3.91 2.35 4.92 30 BB2030N20 <strong>and</strong> 30A (25.4) (144.0) (112.8) (102.9) (99.3) (59.7) (125.0) (76.2)watertightSafety-ShroudTwist-LockNotes: Hub is not included; order Raco part number 1704.This box meets IP67 requirement <strong>and</strong> Type 4X requirements when installed witha watertight conduit hub.Metallic Back BoxesA B C D E F CubicHub Inch Inch Inch Inch Inch Inch Inch CatalogDescription Size (mm) (mm) (mm) (mm) (mm) (mm) Capacity NumbersBack box 20 3/4 5 1 /8 4 4 3 /16 3 3 /4 3 4 30 BB201W<strong>and</strong> 30A devices (19.1) (130.2)(101.6)(106.4) (95.3) (76.2) (101.6)Back box 20 1 5 1 /8 4 4 3 /16 3 3 /4 3 4 30 BB301W<strong>and</strong> 30A devices (25.4) (130.2)(101.6)(106.4) (95.3) (76.2) (101.6)Feed thru for 3/4 8 1 /4 3 1 /16 7 9 /64 4 1 /2 3 3 /4 – 48 FT202W20 & 30A devices(19.1) (209.6)(77.8) (181.4) (114.3) (95.3) –Feed thru for 1 8 1 /4 3 1 /16 7 9 /64 4 1 /2 3 3 /4 – 48 FT302W20 & 30A devices(25.4) (209.6)(77.8) (181.4)(114.3)(95.3) –Notes: These boxes are cast aluminum, suitable for IP54 requirements <strong>and</strong> arefinished with enamel paint. These boxes withst<strong>and</strong> a 500-hour salt spray test aswell as UL raintight <strong>and</strong> external icing tests.Straight Wall Box AdapterDescriptionAdapts 20A <strong>and</strong> 30A Safety-Shroud Twist-Lock receptaclesto two gang, device mount, FD boxes.Angle Wall Box AdapterDescriptionAdapts 20A <strong>and</strong> 30A Watertight Safety-Shroud Twist-Lockreceptacles to single or two gang st<strong>and</strong>ard wall boxes(4” or 4 11 /16” square).Catalog NumberHBL2030APCatalog NumberAA2030PSB-72 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Safety-Shroud <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>ADD-A-SHROUD: The Innovation That Lets You Convert Existing INSULGRIP ®<strong>TWIST</strong>-LOCK ® Plugs to Safety-Shroud <strong>TWIST</strong>-LOCK <strong>Devices</strong>The Add-A-Shroud devices allow conversion of existing 20A <strong>and</strong> 30A3 to 5 Wire <strong>Hubbell</strong> Insulgrip ® Twist-Lock devices to a Safety-ShroudTwist-Lock plug. These devices provide a convenient <strong>and</strong> costeffectiveway to convert existing <strong>Hubbell</strong> Insulgrip Twist-Lock plugsto Safety-Shroud Twist-Lock plugs. The Safety-Shroud Twist-Lockplug permits engagement with the <strong>Hubbell</strong> Mechanical InterlockEnclosure which virtually prevents make <strong>and</strong> break under load.Safety-Shroud Twist-Lock – 20 & 30 AmpereAdd-A-Shroud Catalog Number HBLSS3For conversion of all 3 wire <strong>Hubbell</strong> Insulgrip Twist-Lock <strong>Devices</strong>.Voltage NEMA <strong>Hubbell</strong> Catalog NumbersRating Number Plug Add-A-Shroud20A, 2 Pole 3 Wire Grounding 125 L5-20 HBL2311 HBLSS3250 L6-20 HBL2321 HBLSS3277V AC L7-20 HBL2331 HBLSS3480V AC L8-20 HBL2341 HBLSS3600V AC L9-20 HBL2351 HBLSS330A, 2 Pole 3 Wire Grounding 125 L5-30 HBL2611 HBLSS3250 L6-30 HBL2621 HBLSS3277V AC L7-30 HBL2631 HBLSS3480V AC L8-30 HBL2641 HBLSS3600V AC L9-30 HBL2651 HBLSS3Add-A-Shroud Catalog Number HBLSS45For conversion of all 4 & 5 wire <strong>Hubbell</strong> Insulgrip Twist-Lock <strong>Devices</strong>.Voltage NEMA <strong>Hubbell</strong> Catalog NumbersRating Number Plug Add-A-Shroud20A, 3 Pole 4 Wire Grounding 125/250 L14-20 HBL2411 HBLSS453Ø250V AC L15-20 HBL2421 HBLSS453Ø480V AC L16-20 HBL2431 HBLSS4530A, 3 Pole 4 Wire Grounding 125/250 L14-30 HBL2711 HBLSS453Ø250V AC L15-30 HBL2721 HBLSS453Ø480V AC L16-30 HBL2731 HBLSS453Ø600V AC L17-30 HBL2741 HBLSS4520A, 4 Pole 5 Wire Grounding 3ØY 120/ L21-20 HBL2511 HBLSS45208V AC3ØY 277/ L22-20 HBL2521 HBLSS45480V AC3ØY 347/ L23-20 HBL2531 HBLSS45600V AC30A, 4 Pole 5 Wire Grounding 3ØY 120/ L21-30 HBL2811 HBLSS45208V AC3ØY 277/ L22-30 HBL2821 HBLSS45480V AC3ØY 347/ L23-30 HBL2831 HBLSS45600V AC2.04"(51.8)2.21"(56.1)1.57"(39.9)HBLSS31.65"(41.9)HBLSS45Locking <strong>Devices</strong> ADD-A-SHROUD <strong>Devices</strong>Dimensions in Inches (mm)www.hubbell-wiring.comB-73
Accessories Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>AccessoriesFor 50 Ampere <strong>TWIST</strong>-LOCK <strong>Devices</strong>HBL7774WOHBL7770HBL7382HBL7716CHBL7717CHBL4892Weatherproof Receptacle Lift Cover Plates forFS/FD Box Mounting IP44 SUITABILITYDescriptionCorrosion resistant, gray thermoplastic.Same as above except yellow.Catalog NumbersHBL7774WOHBL77CM74WOCast aluminum.HBL7770Note: See Section K for more information on weatherproof plates.Receptacle Plates for FS/FD Box MountingDescriptionCast aluminum with lift cover.Same as above less lift cover.Catalog NumbersHBL7382*HBL7383Note: The two plates Listed above will only fit non-“CS” type 50A Twist-Lockreceptacles.*Not UL Listed “WDL Closed.”Weatherproof Boots IP55** SUITABILITYDescriptionCatalog NumbersSeal-Tite ® triple seal black elastomeric cover for plugs when used HBL7716C*in a cord set <strong>and</strong> connector bodies when used with flanged inlets.Seal-Tite triple seal black elastomeric cover for connector bodies HBL7717C*when used with cord sets.**When installed <strong>and</strong> used properly with plug <strong>and</strong> connector body combinations.* Not UL ListedClosure CoverDescriptionBlack closure plug.* Not UL ListedBox CoverDescriptionGalvanized Steel fits 4” square, 4 11/16” or 2 gang boxHBL50SCCatalog NumberHBL4892*Catalog NumberHBL50SCB-74 www.hubbell-wiring.comDimensions in Inches (mm)
HUBBELLOCK ® Plugs <strong>and</strong> Connector BodiesFeatures <strong>and</strong> BenefitsThree-piece thermoplastic clamp assembly with fast-lead stainlessscrews provides a more consistent durable grip. Grommets providea sealed cable entry that protects against the entry of moisture <strong>and</strong> dust.Superior wire terminations are assured with box terminals <strong>and</strong>screws with pressure pads. This design captures stray wire str<strong>and</strong>s<strong>and</strong> permits more clamping pressure on the wire withoutdamaging it. Loosening of terminations <strong>and</strong> resulting heat build-upare greatly reduced.Impact resistance in the interior of the female device comes froma strong thermoplastic material.No “lazy” connections because a spring-loaded safety shutterautomatically ejects the plug if it hasn’t been properly locked intothe female device. This eliminates teasing of the contacts, a majorcause of contact burn-up.Arcs are snuffed out, when devices are mated or unmated underload, by spring-loaded safety shutter.Longer contact life is assured by supplementary springs. Otherdevices rely just on contacts themselves to provide propercontact pressure.Enhanced safety because access to live female contacts isrestricted by the spring-loaded safety shutter.Positive locking is ensured by the nose of the plug being keyed intoa detent in female device. This lock is independent of the contactsor a separate mechanical lock.Insulated non-metallic housing enhances safety <strong>and</strong> abuse resistance.Note: Above cut-away view <strong>and</strong> call-outs are construction elements pertaining specifically to the 30A <strong>Hubbell</strong>ock series.While the <strong>Hubbell</strong>ock contact interface design applies to all, there are construction elements that are different,depending on the amperage.Locking <strong>Devices</strong> Features <strong>and</strong> BenefitsDimensions in Inches (mm)www.hubbell-wiring.comB-75
2P 3W, 20A, 125V Locking <strong>Devices</strong>HUBBELLOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125 VoltsReceptacle, Plug <strong>and</strong> Connector2.50"(63.5)1.72"(43.7)#6-32TAP1.66"(42.2)HBL230303.22"(81.8)2.31"(58.7)HBL23035B3.56"(90.4)HBL23032BHBL7423WO1.38" 2.38" 3.28"(35.1) (60.5) (83.3)1.72"(43.7)1.63"(41.4)ReceptacleDescriptionCatalog NumberBlack phenolic, back wired. HBL23030 –PlugDescriptionCatalog NumberNylon housing, thermoset interior. – HBL23035BConnector BodyDescriptionCatalog NumberNylon housing, thermoset interior. HBL23032B –Notes: Cord clamp range for plug <strong>and</strong> connector .32”-.66” (8.12-16.5).<strong>Devices</strong> listed above are not interchangeable with any other <strong>Hubbell</strong>ock devicelisted in this catalog.AccessoriesWeatherproof CoversDescriptionGray polycarbonate for FS/FD boxmounting, corrosion resistant. IP44 SUITABILITY.Same as above except yellow.IP30SUITABILITYCast aluminum, lift cover for indoor use only (not shown).W20A 125VGRCatalog NumbersHBL7423WOHBL74CM23WOHBL23007GRW20A 125VB-76 www.hubbell-wiring.comDimensions in Inches (mm)
HUBBELLOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 600 Volts AC, 20 Ampere, 250 Volts DCReceptacles, Plugs, Connector Bodies <strong>and</strong> InletsReceptaclesDescriptionCatalog NumbersBlack phenolic. HBL20403 –Weathertight, corrosion resistant, nickel plated brass HBL22CM427 –plate, for FS/FD box mounting. IP44 SUITABILITYAluminum angle housing, with 3 /4” topped hub for HBL21420 –surface mounting. IP44 SUITABILITYConnector BodiesDescriptionCatalog NumbersBlack nylon housing, thermoplastic interior. HBL21414B –Same as above except corrosion resistant. HBL21CM414B –Note: Cord clamp range .70”-1.20 ” (17.78-30.5).PlugsDescriptionCatalog NumbersBlack nylon housing, thermoplastic interior. – HBL21415BSame as above except corrosion resistant. – HBL21CM415BNote: Cord clamp range .70”-1.20 ” (17.78-30.5).Flanged InletsDescriptionCatalog NumbersWeathertight, corrosion resistant, nickel plated – HBL22CM428brass plate, for FS/FD box mounting.Black phenolic interior, aluminum housing, for FS/FD – HBL20418box mounting (not shown).Aluminum angle housing, with 3 /4” NPT topped hub – HBL21447for surface mounting.Switched EnclosureDescriptionIP54 SUITABILITYCatalog NumberSwitched enclosure for use with 3 pole 4 wire 30A SEHBL3<strong>Hubbell</strong>ock receptacle. Receptacle not included.Note: For more information on switched enclosures see page B-63.AccessoriesReceptacle PlatesDescriptionCatalog NumbersCast aluminum weatherproof, lift cover plate (not shown). HBL20405302/304 stainless, single gang, smooth (not shown). S737Liquidtight Metallic Conduit AdaptersDescriptionAdapter for use with 1 /2” NPT conduit fittings.Adapter for use with 3 /4” NPT conduit fittings.BootsDescription“Mini” boot for <strong>Hubbell</strong>ock connector body.*“Mini” boot for <strong>Hubbell</strong>ock plug.** Not UL Listed or CSA Certified.IP30SUITABILITYYZCatalog NumbersSAB12SAB34GRX30A 600V AC20A 250V DCCatalog NumbersHBL20424BHBL20425BGRZYX30A 600V AC20A 250V DC3.28" 2.69"(83.3) (68.3)3.25"(82.6)5.31"(134.9).88"(22.4).88"(22.4)3.25"(82.6)5.31"(134.9)1.94"(49.3)1.94"(49.3)2.69"(68.3)HBL214205.08"(129.0)HBL21414BHBL21415B4.56"(115.8)2.69"(68.3)1.75"(44.5)4.56"(115.8)4.75"(120.7)1.22"(31.0)2.44"(62.0)2.33"(59.2)Locking <strong>Devices</strong> 3P 4W, 30A, 600V AC, 20A, 250V DCDimensions in Inches (mm)www.hubbell-wiring.comB-77
3P 4W, 30A, 480V AC Locking <strong>Devices</strong>HUBBELLOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding30 Ampere, 480 Volts ACReceptacle, Plug <strong>and</strong> Connector Body3.28" 2.69"(83.3) (68.3).88"(22.4).88"(22.4)1.94"(49.3)1.94"(49.3)HBL204435.08"(129.0)HBL20444B4.75"(120.7)HBL20445BHBL20424BHBL20425BSEHBL31.22"(31.0)2.44"(62.0)2.33"(59.2)ReceptacleDescriptionCatalog NumberBlack phenolic, red center insert. HBL20443 –Connector BodyDescriptionCatalog NumberRed nylon housing, thermoset interior. HBL20444B –Note: Cord clamp range .70”-1.20” (17.78-30.5).PlugDescriptionCatalog NumberRed nylon housing, thermoset interior. – HBL20445B +Note: Cord clamp range .70”-1.20” (17.78-30.5).Switched EnclosureDescriptionIP54 SUITABILITYCatalog NumbersSwitched enclosure for use with 3 pole 4 wire 30A SEHBL3 –<strong>Hubbell</strong>ock receptacle. Receptacle not included.Note: For more information on switched enclosures see pages B-62 <strong>and</strong> B-63.AccessoriesReceptacle PlatesDescriptionCast aluminum, weatherproof, red finish (not shown).302/304 stainless, single gang, smooth (not shown). S737Liquidtight Metallic Conduit AdaptersDescriptionAdapter for use with 1 /2” NPT conduit fittings.Adapter for use with 3 /4” NPT conduit fittings.BootsDescription“Mini” boot for <strong>Hubbell</strong>ock connector body.“Mini” boot for <strong>Hubbell</strong>ock plug.* Not UL Listed or CSA Certified.+ Not CSA Certified.IP20SUITABILITYYZX30A 480V ACCatalog NumbersHBL20446Catalog NumbersSAB12SAB34GRCatalog NumbersHBL20424B*HBL20425B*GRZYX30A 480V ACB-78 www.hubbell-wiring.comDimensions in Inches (mm)
HUBBELLOCK ® <strong>Devices</strong>3 Pole, 4 Wire Grounding60 Ampere, 600 Volts ACReceptacles, Plug, Connector Body <strong>and</strong> Flanged <strong>Devices</strong>Receptacles IP44 SUITABILITYDescriptionCatalog NumbersBlack phenolic interior with short aluminum housing HBL26410 –<strong>and</strong> lift cover.Black phenolic interior with long aluminum housing HBL26420 –<strong>and</strong> lift cover.Connector BodyDescriptionCatalog NumberBlack phenolic interior with yellow thermoplastic sleeve HBL26418 –over steel cover.Note: Cord clamp range .92”-1.45” (23.36-36.83).Flanged Receptacle IP44 SUITABILITYDescriptionCatalog NumberBlack phenolic interior with steel housing <strong>and</strong> flange. HBL26421 –PlugDescriptionCatalog NumberBlack phenolic interior with yellow thermoplastic sleeve – HBL26419over steel housing.Note: Cord clamp range .92”-1.45” (23.36-36.83).Flanged InletDescriptionCatalog NumberBlack phenolic interior with steel housing <strong>and</strong> flange. – HBL26422Box <strong>and</strong> Adapter PlatesDescriptionCatalog NumbersBox, cast aluminum, only for 60A <strong>Hubbell</strong>ock ® receptacles.HBL26401Straight adapter plate.HBL2640245° adapter plate. HBL26404Note: Straight or angle adapter plate must be used when mounting a 60Areceptacle to HBL26401 box.Kellems ® Cable GripDescription Cord Dia. Catalog NumberCable grip (not shown). .83”-1.00” H660A(21.1-25.4)4.50"(114.3) 3.88"(98.6)4.50"(114.3)3.88"(98.6)HBL264044.50"(114.3).22"(5.6) .41"(10.4)4.50"(114.3)3.88"(98.6)IP30SUITABILITY2.88"(73.2)3.53"(89.7)HBL264022.88"(73.2) (98.6)3.88"GR2.18"(55.4)XYZ60A 600V4.50"(114.3)3.88"(98.6)YXZ60A 600VHBL26401GR3.88" 4.50"(98.6)(114.3)1.50" NPT3.50" sq.(88.9)3.50" sq. 2.88"(88.9) (73.2)1.09"(27.7)3.31"(84.1)2.69"(68.3)3.03"(77.0)2.73"(69.3)2.69"(68.3)2.88"(73.2)1.75"(44.5).25 DIA.HBL264104.52"(114.8)2.86"(72.6)HBL264213.94"(100.1)1.84"(46.7)4.88"(124.0)HBL264204.88"(124.0)HBL264184.81"(122.2)HBL26419HBL264223.63"(92.2)3.63"(92.2)3.19"(81.0)4.13"(104.9)3.50"(88.9)1.09"(27.7)4.13"(104.9)3.50"(88.9)Locking <strong>Devices</strong> 3P 4W, 60A, 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-79
4P 5W, 30A, 600V AC, 20A, 250V DC Locking <strong>Devices</strong>HUBBELLOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding30 Ampere, 600 Volts AC, 20 Ampere, 250 Volts DCReceptacles, Plug <strong>and</strong> Connector Body4- #6-32SCREWS4.56" 3.25"(115.8) (82.6)4- #6-32SCREWS4.56" 3.25"(115.8) (82.6)2.5"(63.5).88"(22.4)1.66"(42.2).88"(22.4)2.84"(72.1)1.88"(47.8 )2.48"(49.3)HBL254033.00"(76.2)1.88"(47.8 )2.84"(72.1)HBL252505.91"(150.1)HBL25414B4.75"(120.7)HBL25415BSAB12, SAB342.69"(68.3)2.50"(63.5)2.33"(59.2)ReceptaclesDescriptionCatalog NumbersBlack phenolic interior, aluminum housing, HBL25403 –blue finish, for FS/FD box mounting.Black phenolic interior, aluminum weatherproof housing, HBL25250 –blue finish, for FS/FD box mounting. IP44 SUITABILITYConnector BodyDescriptionCatalog NumberBlack nylon housing, thermoplastic interior. HBL25414B –Note: Cord clamp range .76”-1.20” (19.30-30.4).PlugDescriptionCatalog NumberBlack nylon housing, thermoset interior, steel shroud. – HBL25415BNote: Cord clamp range .76”-1.20” (19.30-30.4).Liquidtight Metallic Conduit AdaptersDescriptionAdapter for use with 1 /2” NPT conduit fittings.Adapter for use with 3 /4” NPT conduit fittings.IP30SUITABILITYYZX30A 600V AC20A 250V DCCatalog NumbersSAB12SAB34WGRGRWZYX30A 600V AC20A 250V DCB-80 www.hubbell-wiring.comDimensions in Inches (mm)
HUBBELLOCK ® <strong>Devices</strong>4 Pole, 5 Wire Grounding60 Ampere, 600 Volts ACReceptacle, Plug, Connector Body <strong>and</strong> Flanged <strong>Devices</strong>ReceptacleDescriptionCatalog NumberBlack phenolic interior with long aluminum housing with HBL26520 –lift cover <strong>and</strong> blue finish. IP44 SUITABILITYConnector BodyDescriptionCatalog NumberBlack phenolic interior with blue thermoplastic sleeve over HBL26516 –steel cover.Note: Cord clamp range 1.00”-1.50” (25.40-38.10).Flanged ReceptacleDescriptionCatalog NumberBlack phenolic interior with steel housing <strong>and</strong> flange HBL26521 –with blue finish.PlugDescriptionCatalog NumberBlack phenolic interior with blue thermoplastic sleeve <strong>and</strong> – HBL26519steel housing.Note: Cord clamp range 1.00”-1.50” (25.40-38.10).Flanged InletDescriptionCatalog NumberBlack phenolic interior with steel housing <strong>and</strong> flange – HBL26522with blue finish.Box <strong>and</strong> Adapter PlatesDescriptionBox, cast aluminum, only for 60A <strong>Hubbell</strong>ock ® receptacles.Straight adapter plate.Catalog NumbersHBL26401HBL2640245° adapter plate. HBL26404Note: Straight or angle adapter plate must be used when mounting a 60A receptacleto HBL26401 box.Kellems ® Cable GripDescription Cable Range Catalog NumberCable grip (not shown). .83”-1.00” H660A(21.1-25.4)2.18"(55.4)4.50"(114.3)3.88"(98.6)HBL264013.88" 4.50"(98.6)(114.3)1.50" NPTIP30SUITABILITY4.50"(114.3).22"(5.6) .41"(10.4)GRW4.50"(114.3)3.88"(98.6)2.88"(73.2)3.53"(89.7)ZXHBL26402Y60A 600V AC 60A 600V ACYXZ2.88"(73.2) (98.6)3.88"WGR3.50"(88.9)sq.2.88"(73.2)1.09"(27.7)2.69"(68.3)3.03"(77.0)2.73"(69.3)2.69"(68.3)3.94"(100.1)4.50"(114.3) 3.88"(98.6)4.88"(123.9)HBL265205.44"(138.2)HBL265164.53"(102.13)3.31"(84.1)HBL265214.81"(122.2)HBL26519HBL265224.50"(114.3)3.88"(98.6)HBL264043.63"(92.2)3.19"(81.0)2.86"(72.6)(104.6)4.12"1.09"(27.7)3.50"(88.9)4.13"(104.9)Locking <strong>Devices</strong> 4P 5W, 60A, 600V ACDimensions in Inches (mm)www.hubbell-wiring.comB-81
Not UL Listed 2P 3W, 20A, 125V AC or DC, 10A, 250V DC, 480V AC Locking <strong>Devices</strong>Not UL Listed, HUBBELLOCK ® <strong>Devices</strong>2 Pole, 3 Wire Grounding20 Ampere, 125 Volts AC or DC, 10 Ampere, 250 Volts DC, 480 Volts ACReceptacle, Plug <strong>and</strong> Connector Body2.50"(63.5)1.72"(43.7)1.66"(42.2)#6-32TAPHBL23000G2.31"(58.7)3.22"(81.8)HBL23005GB3.56"(90.4)1.38"(35.1)HBL23002GB2.38"(60.5)3.28"(83.3)1.72"(43.7)1.63"(41.4)IP30SUITABILITYReceptacleDescriptionCatalog NumberBlack phenolic, back wired. HBL23000G –PlugDescriptionCatalog NumberNylon housing, thermoset interior. – HBL23005GBConnector BodyDescriptionCatalog NumberNylon housing, thermoset interior. HBL23002GB –Note: Cord clamp range for plug <strong>and</strong> connector .32”-.66” (8.12-16.5).AccessoriesWeatherproof CoversDescriptionGray polycarbonate for FS/FD boxmounting, corrosion resistant. IP44 SUITABILITY.Same as above except yellow.Cast aluminum, lift cover for indoor use only (not shown).YX20A 125VGRCatalog NumbersHBL7423WOHBL74CM23WOHBL23007GRYX20A 125VB-82 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong> <strong>and</strong> Watertight Safety Shroud <strong>Devices</strong>Technical Information15-30 Ampere Twist-Lock, 20-30 Ampere Safety-Shroud Twist-LockSpecificationsListingsListed to UL St<strong>and</strong>ard 498 (Attachment Plugs <strong>and</strong> Receptacles).Fed. Spec W-C-596 (Insulgrip <strong>and</strong> Safety-Shroud).Certified to CSA St<strong>and</strong>ard C22.2 No.42 (General Use Receptacles, AttachmentPlugs <strong>and</strong> Similar Wiring <strong>Devices</strong>).MaterialsPartMaterialsPlugs <strong>and</strong> ConnectorBodies (Insulgrip ® ) 15-30ABlade/Contact CarrierTerminal RetainerCover (Housing)Cord ClampDust ShieldBlades/ContactsTerminal ClampTerminal ScrewsGrounding ScrewCord Clamp ScrewsBody Holding ScrewsNatural (white) nylonClear polycarbonateBlack nylon (yellow in “CM”devices)Natural (white) nylonEPDMBrassCold rolled steal – nickel plated15A (8-32), 20-30A (10-32) Brass(white finish on neutral screwwhen used)Brass (green finish)Steel – zinc platedSteel – zinc platedFlanged Inlet/Receptacles 15-30AFlanged CasingNatural (white) nylonBlade/Contact CarrierNatural (white) nylonTerminal RetainerClear polycarbonateBlades/ContactsBrassDrive ScrewsSteel – zinc platedTerminal ClampCold rolled steel – nickel platedTerminal Screws15A (8-32), 20-30A (10-32) Brass(white finish on neutral screwwhen used)Grounding ScrewBrass (green finish)Mounting ScrewsNickel plated brassRound head screwsScrew Sizes15A: 6-32, 3/8” long20A & 30A: 8-32, 7/16” longReceptacle, Single 15A 20A & 30ACover(Top) Nylon (Black) Nylon (Black)Base RTP (Black) RTP (Natural)Contact Springs .031” Brass .040” BrassClamp .031” Brass .040” BrassGround Contact .031” Brass .040” BrassGround Shunt – .015” BrassBridge (Mounting Strap) .050” Steel-zinc –platedEnd Plates (Mounting) – .050” BrassBack Plate – .040” BrassTerminal Screws Brass (8-32) Brass (10-32)(white finish onneutral screwwhen used)Grounding Screw Brass (Green) Bronze (Green)Flat Head Mounting ScrewsSteel-zinc plated Steel-zinc platedAuto Ground Clip Stainless steel Stainless steel(Used only onIG receptacle)PartMaterialsSafety-Shroud Receptacles 20-30AAngle, Surface Semi-FlushHousing <strong>and</strong> Mounting Flange Gray Valox ®Mounting PlateGalvanized steel(Angle Housing Only)Body Contact CarrierNatural (white) nylonTerminal RetainerClear polycarbonateBody Holding ScrewsSteel, zinc platedContact SpringsBrassSpring Binding PlateBrassTerminal ClampSteel, nickel plated .080” curved,scallopedTerminal Screws10-32 Brass (white finish onneutral screw when used)Grounding ScrewBrass (green finish)Mounting Plate ScrewsSteel, zinc platedWall Plate Mounting Screws Steel, zinc platedSafety-Shroud Twist-Lock Plug 20-30AInsulgrip Plug with Safety-Shroud installedSafety-shroudWhite ValoxCord ClampWhite nylonPerformanceElectricalDielectric VoltageWithst<strong>and</strong>s 2,000V minimum.Max. Working Voltage600 Volts RMS.Current InterruptingCertified for current interrupting atfull rated current.Temperature RiseMax 30°C temperature rise at fullFed. Spec.rated current after 250 cycles ofoverload at 200% of rated currentat a power factor of 75%.(WC 596)MechanicalCord AccommodationRound portable service cords of(Plugs <strong>and</strong> connectors only) diameters commensurate with thedevice rating as defined in ULSt<strong>and</strong>ard 62, CSA C22.2 No. 49.Cord Grip Accommodation 15A: .230”-.720” (5.8-18.3);(Insulgrip) 20A & 30A 3W: .360”-.930” (9-24);20A & 30A 4W-5W: .350”-1.150” (9-29).Terminal IdentificationTerminals identified in accordancewith UL 498 (X, Y, Z, White, Green).Terminal Accommodation 20A & 30A,#16- #8 AWG.15A, #18-#10 AWGProduct IdentificationRatings are a permanent part of thedevice housing.EnvironmentalFlammability (Enclosure) HB or better per UL94/CSA 22.2 No. 0.17.Plugs, Connectors,Flanged Receptacles& Flanged InletsReceptacles (Box Mount)V2 or better.Operating Temperatures Maximum Continuous 75° CMinimum -40° C (w/o impact).®Valox is a registered trademark of General Electric Company.Locking <strong>Devices</strong> SpecificationsDimensions in Inches (mm)www.hubbell-wiring.comB-83
Specifications Locking <strong>Devices</strong>Watertight Safety-Shroud <strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Specifications20 & 30 AmpereSpecificationsListingsListed to UL St<strong>and</strong>ard 498 (Attachment Plugs <strong>and</strong> Receptacles).Certified to CSA St<strong>and</strong>ard No.42 (General Use Receptacles, Attachment Plugs <strong>and</strong> Similar Wiring <strong>Devices</strong>).Fed. Spec. WC-596.UL Listed, CSA Certified to Type 4, 4X <strong>and</strong> Type 12.PartMaterialsWatertight Safety-Shroud Plug (Insulgrip ® ) 20 <strong>and</strong> 30ABlade HolderNatural (white) nylonTerminal RetainerClear polycarbonateCover (Housing) Black Valox ®Cord ClampWhite ValoxBladesBrassTerminal ClampSteel, nickel plated .080” curved scallopedTerminal Screws10-32 brass (white finish on neutral screw when used) multiple drive headGrounding ScrewBrass (green finish) combination headCord Clamp ScrewsStainless steel 302/304, combination headBody Holding ScrewsStainless steel 302/304, combination headClosure Cap <strong>and</strong> StrapNeoprene EPDM BlendWatertight Safety-Shroud Connector (Insulgrip) 20 <strong>and</strong> 30ABody Contact CarrierNatural (white) nylonTerminal RetainerClear polycarbonateContact SpringBrassSpring Binding PlateBrassCover (Housing)Black ValoxCord ClampWhite ValoxTerminal ClampSteel, nickel plated .080” curved scallopedTerminal Screws10-32 brass (white finish on neutral screws when used) multiple drive headGrounding ScrewBrass (green finish) combination headCord Grip ScrewsStainless steel 302/304, combination headBody Holding ScrewsStainless steel 302/304, combination headClosure Cap <strong>and</strong> StrapPolypropylene with Neoprene gasket*Watertight Safety-Shroud Receptacle, Single 20 <strong>and</strong> 30AHousing <strong>and</strong> FlangeGray ValoxBody Contact CarrierNatural (white) nylonTerminal RetainerClear polycarbonateDrive ScrewsSteel, zinc platedContact SpringBrassSpring Binding PlateBrassTerminal ClampSteel, nickel plated .080” curved, scallopedFlange GasketClosed-cell neoprene foamLid GasketClosed-cell neoprene foamCover Hinge Pin Stainless steel 302/304Cover Spring Stainless steel 302/304Terminal Screws10-32 brass (white finish on neutral screw when used) multiple drive headGrounding ScrewBrass (green finish) combination headMounting ScrewsStainless steel 302/304 combination headWatertight Safety-Shroud Flanged Inlet20 <strong>and</strong> 30AHousing <strong>and</strong> FlangeGray ValoxBlade HolderNatural (white) nylonTerminal RetainerClear polycarbonateBladesBrassDrive ScrewsSteel, zinc platedTerminal ClampSteel, nickel plated .080” curved scallopedTerminal Screws10-32 brass (white finish on neutral screw - when used) multiple drive headGrounding ScrewBrass (green finish) combination headClosure CapNeoprene EPDM blendMounting ScrewsStainless steel 302/304 combination headPerformanceElectricalDielectric VoltageWithst<strong>and</strong>s 2,000V minimum.Max. Working Voltage600 Volts RMS.Current InterruptingCertified for current interrupting at full rated current.Temperature RiseMax 30 deg. temperature rise at full rated current after 250 cycles of overload at200% of rated current at a power factor of 75%.(WC 596)MechanicalCord AccommodationRound portable service cords of diameters commensurate with the device rating(Plugs <strong>and</strong> connectors only) as defined in UL St<strong>and</strong>ard 62, CSA C22.2 No. 49.Cord Grip Accommodation20 <strong>and</strong> 30A, 3W: .32”-.93” (8.0-24.0mm) #16-3 Type SJ-#8-3 Type S,SO;20 <strong>and</strong> 30A, 4W: .35”-1.15” (9.0-29.0mm) #16-4 Type SJ-#8-4 Type S, SO;20 <strong>and</strong> 30A, 5W: .35”-1.15” (9.0-29.0mm) #16-5 Type S,SO - #8-5 Type S,SO.Terminal IdentificationTerminals identified in accordance with UL 498 (X, Y, Z, White, Green).Terminal Accommodation#16- #8 AWG solid or str<strong>and</strong>ed wire.Product IdentificationRatings are a permanent part of the device blade holder, <strong>and</strong> are also labeled on devicecolor coded by voltage, visible in use. Catalog No. I.D. is on device visible in use.EnvironmentalMoisture ResistanceType 4, 4X, 12, IP66 suitability.Flammability (Enclosure) V0 per UL94 or CSA 22.2 No. 0.17Operating TemperaturesMaximum Continuous 75°C; Minimum -40°C (w/o impact).*Suitable for use as a flanged receptacle.®Valox is a registered trademark of General Electric Company.B-84 www.hubbell-wiring.comDimensions in Inches (mm)
<strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Technical Information50 Ampere<strong>TWIST</strong>-LOCK Listing <strong>and</strong> SpecificationsSpecificationsListingsListed to UL St<strong>and</strong>ard 498 (Attachment Plugs <strong>and</strong> Receptacles).Certified to CSA St<strong>and</strong>ard No. 42 (General Use Receptacles, Attachment Plugs <strong>and</strong> Similar Wiring <strong>Devices</strong>).MaterialsPart Materials Part MaterialsPlug (Twist-Lock)50AGround ContactOne piece copper/nickelBlade HolderRynite ® (black)Seal CupNylonPower BladesBrassCord Grip crews302/304 Stainless steelTerminal Set ScrewStainless steelSealNeopreneTerminal RetainerRyniteFlanged Inlet50AFront & Rear (housing) Supertough nylonFlanged Casing.062” Steel, zinc plateCord ClampRynite (white)Blade HolderPhenolicSealNeoprenePressure ScrewsSteel, zinc plateSeal CupNylonBlades.100” BrassBox TerminalCopperGround Spring.025” BronzeLatchesSupertough nylonTerminals.050” Steel, brass finishGround Contact Spring One piece copper/nickel Grounding Terminal.062” Copper, green finishCord Clamp Screws302/304 Stainless steelRound Head ScrewsSteel, zinc plateShroud302/304 Stainless steelReceptacle50AConnector (Twist-Lock) 50ABodyPhenolicContact NoseNylon (black)FacePhenolicTerminal RetainerRynite (black)Contact Springs.100” Brass alloyTerminal Set Screw302/304 Stainless steelContact Binding Plates .100” BrassContact SpringBrassGround Contact.031” BrassAssembly Ring302/304 Stainless steelInsulator.093” Laminated phenolicFront & Rear (housing) Supertough nylon (black) Bridge (Mounting Strap) .062” Steel, zinc plateLatchesSupertough nylon (white) Pressure ScrewsSteel, zinc plateCord ClampRynite (white)Terminals.050” SteelBox TerminalCopperCasing.062” Steel, zinc plateContact HolderRynite (black)Center Pin (CS <strong>Devices</strong>) Steel, zinc plateProduct IdentificationRatingsCatalog No.Molded into face for all devices <strong>and</strong> stamped into stainless steel shroud on plug devices.Molded into face for plug <strong>and</strong> connector bodies <strong>and</strong> stamped into stainless steel shroud on plug devices.PerformanceElectricalDielectric VoltageWithst<strong>and</strong>s 2,000V minimum.Max. Working Voltage600 Volts RMS.Current InterruptingCertified for current interrupting at full rated current.Temperature RiseMax. 30°C temperature rise at full rated current after 50 cycles of overload at150% rated DC current (UL 498)MechanicalTerminal Accommodation#10 AWG min. -#6 AWG max.Cord Grip Accommodation .750”-1.150” (19.1-29.2).EnvironmentalFlammabilityUL 94 V0 for Receptacles <strong>and</strong> Inlets. HB or better for Plugs <strong>and</strong> Connectors.Operating TemperaturesMaximum continuous 75°C; minimum – 40°C (w/o impact).Please consult the factory for product dimensions <strong>and</strong> specifications for other products listed in this catalog.Rynite is a registered trademark of E. I. Dupont.Locking <strong>Devices</strong> SpecificationsDimensions in Inches (mm)www.hubbell-wiring.comB-85
Specifications Locking <strong>Devices</strong>Switched Safety EnclosuresTechnical InformationSwitched <strong>TWIST</strong>-LOCK ® <strong>and</strong> HUBBELLOCK ® EnclosuresSpecificationsTypical SpecificationsManufacturer’s Identification<strong>Hubbell</strong> SETL3/SEHBL3-SE2730A.DescriptionLockable Switched Enclosure.This unit is a complete enclosure readyto accept any 20 or 30A Twist-Lock or 30A <strong>Hubbell</strong>ock receptacle.Electrical Type2 Pole + Earth through 4 Pole & Earth.Rating20 or 30A, 125V through 3ØY 347/600V AC.ConfigurationNEMA Locking L5-20R through L23-30R.Enclosure TypeOutdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids,with Knockout).Enclosure MaterialNon-metallic enclosure suitable for metallic conduit.MaterialsPartMaterialsBase Valox ® /Makroblend ®TopValox/MakroblendH<strong>and</strong>leValox/MakroblendConduit HubZinc 3 /4” watertightEnclosure GasketNeopreneShaftValox/MakroblendShaft SealMolded neopreneFrameGalvanized steelLift CoverValox/MakroblendEnclosure ScrewsStainless steel 300 seriesHinge Spring <strong>and</strong> PinStainless steel 300 seriesPerformanceElectricalDielectric VoltageWithst<strong>and</strong>s 3,000V minimum.Max. Working Voltage600V RMS.Current InterruptingCertified for current interrupting at full rated current <strong>and</strong> voltage.Short Circuit Withst<strong>and</strong> Suitable for use on a circuit capable of delivering not more than 10,000RMS symmetrical amperes at the voltage rating of the receptacle.OperationsMechanical 10,000 cycles;electrical 6,000 cycles.MechanicalImpact Resistance In accordance with UL 746C.Terminal IdentificationIn accordance with UL, CSA <strong>and</strong> international conventions.Product IdentificationIdentification <strong>and</strong> ratings are part of external label <strong>and</strong> receptacle face.Weight3.5 pounds.MountingExternal fully adjustable feet.EnvironmentalMoisture ResistanceOutdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids,with Knockout).FlammabilityUL94 – 5 VA <strong>and</strong> V0 classification.Operating TemperatureMaximum continuous +75°C.Minimum continuous -40°C.UV ResistanceAll materials are UV stabilized.This device provdes on/off switched control of a plug connected load <strong>and</strong> includes lockout provision: ON-OFF control knob (in theOFF position) accepts up to a 5 /16 inch (8.0) diameter shackle of suitable padlock lockout device to isolate energy from thereceptacle <strong>and</strong> cord connected equipment as a method of compliance to OSHA Lockout/Tagout Regulation 29CRF Part 1910.147.®Makroblend is a registered trademark of Miles.®Valox is a registered trademark of General Electric Company.B-86 www.hubbell-wiring.comDimensions in Inches (mm)
Switched Safety EnclosuresTechnical InformationCIRCUIT-LOCK ® Unfused Safety-Shroud <strong>TWIST</strong>-LOCKMechancial InterlockSpecificationsTypical SpecificationsManufacturer’s IdentificationDescriptionElectrical Type<strong>Hubbell</strong> HBLMITL.CIRCUIT-LOCK Mechanical Interlock.2 Pole + Earth through 4 Pole & Earth.Rating Up to 30A, 600V AC 3Ø.Enclosure TypeOutdoor-4X (Watertight, Washdown);Indoor-12K (Dust-tight, Falling Dirt <strong>and</strong> noncorrosive liquids withknockout. IP66 suitability.Enclosure MaterialNon-metallic enclosure suitable for metallic conduit.MaterialsPartMaterialBase Valox ®TopValoxH<strong>and</strong>leValoxConduit HubZinc 3 /4” watertightEnclosure GasketNeopreneShaftValoxShaft SealNeopreneFrameGalvanized steelEnclosure ScrewsStainless steel 300 seriesPerformanceElectricalDielectric VoltageWithst<strong>and</strong>s 3,000V Min.Max. Working Voltage600V RMS.Current InterruptingCertified for current interrupting at full rated current voltage.Short Circuit Withst<strong>and</strong> Rating Suitable for use on a circuit capable of delivering not more than 10,000RMS symmetrical amperes at the voltage rating of the receptacle.OperationsMechanical 10,000 cycles;Electrical 6,000 cycles.MechanicalImpact Resistance In accordance with UL 746C.Terminal IdentificationIn accordance with UL, CSA.Product IdentificationIdentification & ratings are part of the external label & receptacle face.Weight3.5 pounds.MountingExternal full adjustable feet.EnvironmentalMoisture ResistanceOutdoor – 4X (Hose-Directed Water, Corrosion Resistance), IP66 suitability.FlammabilityMeets UL 94V0 material classification.Operating TemperatureMaximum continuous +75°C;Minimum continuous -40°C.UV ResistanceAll exposed materials are UV stabilized.®Valox is a registered trademark of General Electric Company.Locking <strong>Devices</strong> SpecificationsDimensions in Inches (mm)www.hubbell-wiring.comB-87
Specifications Locking <strong>Devices</strong><strong>TWIST</strong>-LOCK ® <strong>Devices</strong>Technical InformationVALISE ® Plugs <strong>and</strong> ConnectorsSpecificationsPlugs Part DescriptionTypical Specification- Catalog No. HBL4723VY. Plug 15, 20 & 30AManufacturer’s Identification - <strong>Hubbell</strong> HBL4723VY. Housing NylonBladesBrassDescription - Straight Body Plug Ground Blade BrassType – 2 Pole, 3 Wire, Grounding Terminal Screws Steel multiple driveRating – 15 <strong>and</strong> 20A 125V, 250V, & 277V AC, 30A 125 & 250V Cable Inserts Polyphenylene OxideCertification – UL Listed File E1706, CSA Certified Terminal Clamps CR SteelFile LR280C Body Holding Screws Steel multiple driveIP Suitability – IP20Connector Bodies Part ConnectorTypical Specification- Catalog No. HBL4729VY Connector 15, 20 & 30AManufacturer’s Identification - HBL4729VY Housing NylonContact <strong>and</strong> Ground Springs BrassDescription – Straight Body Connector Terminal Screws Steel multiple driveType – 2 Pole, 3 Wire, Grounding Cable Inserts Polyphenylene OxideRating – 15 <strong>and</strong> 20A 125V, 250V, & 277V AC, 30A 125 & 250V Terminal Clamps CR SteelCertification – UL Listed File E1706, CSA Certified Body Holding Screws Steel multiple driveFile LR280CIP Suitability – IP20PerformanceElectricalDielectric VoltageMax. Working VoltageCurrent InterruptingTemperature RiseMechanicalTerminal IdentificationTerminal AccommodationProduct IdentificationTorqueCord Range15A20A30AEnvironmentalFlammabilityOperating TemperatureSt<strong>and</strong>ardsNEMA WD1NEMA WD6Listed to UL St<strong>and</strong>ard UL498Certified to CSA St<strong>and</strong>ard C22.2 No. 42Withst<strong>and</strong>s 2,000V minimum.125V, 250V or 277V AC as rated.Certified for full rated current.Max. 30°C temperature rise at full rated current after 50 cycles ofoverload at 150% rated DC current.Screw Color per UL 498 (Brass, White & Green).15A-18 to 12AWG.20A-18 to 10AWG.30A-14 to 8AWG.Molded rating on device face.12 in-lb terminal screws, 7 in-lb assembly screws..220” to .660” (5.6mm to 16.8mm)..325” to .720” (8.26mm to 18.3mm)..590” to .930” (15.0mm to 23.6mm).UL 94HB.Maximum continuous 75°C, minimum -40°C (w/o impact).B-88 www.hubbell-wiring.comDimensions in Inches (mm)
Change language