Labeling System Eases Consumer Confusion - NV Publications.com

Recycle Labels (Cont’d from Page 1)how to recycle a package after its use, and to develop aconsistent, accurate labeling system for companies thatadheres to the Federal Trade Commission (FTC) “GreenGuides”and uses nationally accurate recyclability data.“Consumers are faced with a confusing landscapeof recycling messages and instructions that are ofteninconsistent or misleading,” said GreenBlue projectmanager Anne Bedarf, who has led development ofthe labeling system for the SPC.“We believe this labelwill create a harmonized system that will help consumersand companies contribute to more effectiveresource recovery.”The Packaging Recovery Label System is comprisedof five pieces of information for every unique andeasily separable packaging component:Packaging Material — Identifies the material typeof the packaging component.Packaging Component — The specific part of thepackage referenced by the label.The Recyclability Icon — Indicates the recyclabilityof the packaging component.Special Instructions — Specific directions for theconsumer to ensure successful recycling.Program Website — Provides resources and informationon the label,local recyclability and proper recycling.(Cont’d on Page 13)4 November 21, 2011 Flexo Market News www.nvpublications.com

The difference between F&K and other presses is theamount of waste we don’t generate during set-ups.We offer about 45 feet of run-out per set-up— vs —What did you say you’re wasting now?Establishing press settings & registration on a conventional flexopress is done while running. This wastes substrate, ink, energy and,just as importantly, time. Given that each and every job changerequires a set-up, multiply that waste by how many changes youmake in a day, in a week, in a year and the losses are staggering.F&K flexo presses cut that waste. In fact with our smart GPSsystem of setting register and impression settings before thecylinders are even put on the press, waste can be cut by 90% or more.Our presses are also designed for modern plants where space is at a premium and efficiency is a primary concern. For example, ourface-to-face design option enables both the unwind & rewind to be accessed and monitored from one central position. The highly efficientweb path also minimizes the height requirement.Exceptional performance and featuresfor a remarkably reasonable price.Every aspect of an F&K press is state-of-the-art, except theprice. We’ve addressed operator and maintenance accessibility, operate at high speeds and workwith a wide range of substrates to give you more flexibility and maximimum potential. It’s premiumF&K performance and quality at a highly competitive price.Talk F&K with your Bobst representative and learn more about staying competitive byreducing waste, maximizing run-time and using technology to stay ahead.Bobst Group North America, Inc. 146 Harrison Avenue, Roseland, NJ 07068 -1294 Tel: 888-226-8800

ICE Europe 2011 Sees RiseIn Attendance, Exhibiting CompaniesICE Europe 2011, held November 8-10 at the MunichTrade Fair Centre in Munich, Germany, hosted5,700 visitors from 65 countries and 384 exhibitorsfrom 23 countries in a net exhibition space of some10,000 square meters.At its new venue, the show grew by seven percentin visitor numbers, by 17 percent in exhibitor numbersand by 24 percent in exhibition space comparedto the previous event.The show in 2009 saw a27 percent increase over the show two years prior.“ICE Europe 2011 was also more international thanever: 44 percent of the exhibitors and 47 percent ofOur Locationthe visitors came from outside Germany,” said NicolaHamann, Exhibition Director ICE Europe on behalf ofthe organizers Mack Brooks Exhibitions. “This is anincrease of four percent in international visitors comparedto last time, while the traditionally high percentageof foreign exhibitors remained stable.”Some 70 percent of the non-German visitors camefrom other EU countries and a further 20 percentfrom European countries outside the EU.The Far East,the Middle East and North America were also representedat ICE Europe 2011 with some three percent ofvisitors coming from each of these regions.The 2011event welcomed considerably more visitors from EasternEurope,Turkey and North America.Top ten visitorcountries, after Germany and Italy, were Switzerland,Austria, France, Great Britain, The Netherlands, Spain,Belgium,Turkey, Russia and Poland.ICE Europe 2013 will take place from 19-21March 19-21, 2013 at the Munich Trade FairCentre. Next year, Mack Brooks Exhibitionswill organize ICE Asia, from October 23 -25, inShanghai, China, and the next ICE USA willtake place April 9-11 2013 in Orlando,Florida.Your LocationOnlineFlexo Training& TechnologiesMaximize the effectiveness of your personnel,equipment, software and materials. A&V offerstraining programs and support designed for everylevel of flexo experience. Training is offered on-site atyour location, our locations or online. Take advantageof our cloud-based training sessions. OEC Graphics OpensNew California FacilityOEC Graphics has opening OEC Graphics– West Coast, a 12,500-square-foot, freestandingprepress manufacturing and salesfacility in Union City, California. Positionedeast of the San Francisco Bay, OEC Graphics-West Coast is located to service converterand consumer product company customerswest of the Rockies.OEC Graphics – West Coast will serve consumerproduct companies and flexo printers,including corrugated, carton, flexiblepackaging and label. In-house services willinclude prepress, platemaking, design, brandmessaging and technical support. OEC –West Coast will feature thermal and solventplatemaking with Esko High DefinitionFlexo capabilities. Plates up to 52 inches x80 inches are possible with OEC’s Flat TopDot technology and HD.Label Impressions Wins First PlaceTLMI “Promotional Label” AwardLabel Impressions, Orange, California, took“First Place” in the Promotional Label categoryin this year’s TLMI Label Awards competitionwith its “Fujisan – Fresh SushiPromotional Label.”6 November 21, 2011 Flexo Market Newswww.nvpublications.com

north_america@uteco.com www.uteco.comnorth_america@uteco.com www.uteco.comH I G H S P E E D F L E X O P R I N T I N GLeading edge innovation in flexographic printing 1960fpm© P2P ® : dynamic adjustment systemcontrols printing pressures PCT ® : Press Control during Transition PTC ® : Predictable Torque Control SprintWash ® : new automatic washup system FlexoSmartPackHP ® : Uteco engineeringplatform for improved performance andprofi tability in fl exographic printing ShopWare ® Production Management,Control & Monitoring: easy machine-operatorinterface to manage productivity LogiPack ® : automatic handlingof reels and coresGENETIC INNOVATION north_america@uteco.com www.uteco.comAnd a new innovation is coming...

X“Feel the Power” of High Denion Anilox,Pamarco’s Next Generaon of EFLO Technology, EFLO-HDCustom Cell Bitmap TechnologyEFLO-HDdesgined and created exclusively by PamarcoKey Features of EFLO-HD• High Performance HD Cered Narrow Web Anilox• 500W MBA Mul Hit Laser Technology• Extended high denion Color Gamut Performance• Superior densies and contrasts at higher line screens• Cleaner and sharper highlights• Consistent ink transfer• Reduced ink sping• Cell geometry designed to work with HD DigitalPlate TechnologyIntense ColorsSmooth Transionsto Zero• EFLO-HD delivers exceponal prinng throughout theenre tonal range; dazzling highlights, stable midtones,smooth gradients and solids, along with highersolid ink densies.• With EFLO-HD, the screen rulings can be increasedmaintaining solid densies while at the same meachieving sharper contrasts at the lower end 1% and below.• With the EFLO-HD higher prinng resoluons resulngin sharper images, smoother nts and a greater color gamut.EFLO-HDSharp Details:High ContrastMake EFLO-HD your Anilox choice...and bring your exo printed images to life!1-800-53FLEXO • +44 (0) 1925 456789http://www.pamarco.comAICC Utilizes EskoArtworkTools For Corrugated CompetitionTeams of corrugated packaging designers faced offlast month during the 2011 Association of IndependentCorrugated Converters’ biennial Designer's Lab,where they had to construct a fully functional, eyecatchingPOP display within a 24-hour period. All ofthis year’s winning entries used EskoArtwork ArtiosCADsoftware and Kongsberg XP 24 digital finishingtables to meet the deadline, while conforming tospecific parameters.The biennial Designers’ Lab and Independent PackagingDesign Summit was held in connection withAICC’s annual meeting October 26-28 in Salt LakeCity, Utah. The Summit, explained Jim Nelson of theGreat Lakes Packaging Company and the Chairmanof the AICC Packaging Design Competition Committee,brings together designers from independentcompanies to network and share knowledge and experiences;provides an educational platform for designersto learn new techniques in both structuraland graphic design from industry experts; and givesvendors the opportunity to provide hands-on experiencewith their tools.EskoArtwork co-sponsored the2011 Designer Lab contest,which divided 25 designersfrom different companiesinto six teams; each teamhad a choice of CAD designstation and cutting tablealong with a digital printer.The teams were requiredto follow specific parametersand objectives presented by theSweet Candy Company of Salt Lake City.The first, second and third place winners, alongwith the two teams receiving honorable mention, allrelied on EskoArtwork's ArtiosCAD structural designsoftware and Kongsberg tables to create their prototypes.Some teams, including the first-place winner,also used EskoArtwork Studio to help assist thegraphics design process in Adobe ® Illustrator ® .“The criteria was introduced late Wednesday afternoon,giving us 1-2 hours to work that day,” explainedChris Butterfield, Design Department Manager forCapital Corrugated & Carton, one of the first placeteam members, along with Dave Lamb, Mid-AtlanticPackaging, John Madlock, Utah Paperbox and YuttannaChiaravalloti, Orange County Container Group.“We then came back Thursday, and worked from 8:30am to 4:00 pm, brainstorming ideas and quickly comingto a consensus.The ease of tools in ArtiosCAD letus pull it off.”8 November 21, 2011 Flexo Market News www.nvpublications.com

The standout event dedicated toconverting and package printing...Cleveland...is breaking away from the pack.After years of a strong and successfullco-location with PACK EXPO, CPP EXPOis proud to announce the first in aseries of regional events, located inspecific markets to offer you thehighest potential for business growth.Visit CPPEXPO.comFor information on exhibiting, contactLeo Nadolske at CPP EXPO 201.881.1632Email: lnadolske@cppexpo.comApril 18-19, 2012I-X CenterCleveland, Ohio USASponsored by:Official Publication of CPP EXPOCPP EXPO is produced and managed by HA BRUNO LLC.

Simply the BestCERAMICANILOXROLLQUICKC L E A NCLEANERCall LBL Enterprises:414-747-9390New Study FocusesOn Glue Applied LabelsThe worldwide market for glue applied labels is thesubject of a new, second edition of a market studycalled The Global Glue Applied Label Market andTechnology Review 2011 from researchers AWAAlexander Watson Associates.With 41 percent of the world market share in labels,the glue applied technology remains the preferredchoice. Embracing both cold (wet) glue applied labelsand hot-melt, wrap-around glue applied labels, it grewoverall by four percent in 2010, and is forecast to continueto grow in every region in the medium term,with Asia Pacific enjoying the most dynamic activity.Most glue applied labels are destined for the beveragemarket, which takes a 70 percent share of usage.The Global Glue Applied Label Market and TechnologyReview 2011 examines the market structure andvalue chain; market segmentation by end-use, geographies,and material choice; and evaluates in depth theworld’s four main regions — Europe, North Americas,AsiaPacific, and South America.Technology trendsin both material choice and imaging are highlightedand, looking to the future, the effects of globalizationand environmental issues are considered.For more information visit www.awa-bv.com.®10 November 21, 2011 Flexo Market News www.nvpublications.com

Harper Corporation JoinsSGP As Silver PatronSustainable Green Printing Partnership (SGP), anon-profit organization providing sustainability certificationin the graphic communications industry, welcomedHarper Corporation of America as its newestSilver Patron. Harper Corporation of America is aprovider laser-engraved ceramic anilox roll productionand restoration for the gravure and flexographicprinting markets worldwide.“Sustainability is important at Harper Corporation,as it is throughout the flexographic industry,”said LeeKluttz,Vice President of Operations at Harper Corporationof America.“We are excited to contribute to acause that we believe will only improve the industryas a whole.”To support its sustainability initiatives, Harper hasimplemented recycling programs and adopted a fourdaywork week, thereby lowering employee commutemiles by 20 percent and contributing to theimprovement of local air quality. In productionprocesses, the company has developed responsiblymanufactured programs to prevent pollution, save energy,and reduce the use of raw materials. The productssold to sustain anilox roll life are biodegradable,using chemistry with reduced VOC rates.Flexo Market NewsINTERNET DIRECTORYINTERNET DIRECTORYAdheso-Graphics, Inc.www.adheso-graphics.comAGI manufactures, distributes and converts currenttechnology flexo mounting tapes and backing systemsfor corrugated plate mounting. Flexstik hardvinyl, FlexSoft, bi.esse brand, Gold Series Thin tapesfor sleeve and Narrow web plate mounting. Specialtytapes that cover the vast thickness range requirementsand specific adhesion systems for all flexomounting requirements. We provide technical serviceand problem solving services for unique customers &applications.Advanced Prepress Graphics, Inc.www.flexoprepress.comFlexo Plate making at it’s finest. All format’s availableup to 42” x 80”. Flexo artwork, Flexo films, and FlexoPlates.Anderson & Vreeland, Inc.www.andersonvreeland.comA&V manufactures a complete line of photopolymerplate processing systems and is a leading distributorof flexographic platemaking materials. A&V also sellsdigital imaging systems and software specifically designedfor flexography.Comexi Group Industries S.A.U.www.comexigroup.comThe Comexi Group is a leading supplier of qualityflexographic C.I. presses for the flexible packagingindustry worldwide. We also provide solventless laminators,slitter/rewinders and related peripheral equipmentsuch as automatic wash-up systems, solventrecovery systems, automatic roll unloaders, and platecylinder/sleeve storage systems.Daetwyler Corp.www.daetwyler-usa.comSpecialized Doctor Blades for every printing andcoating application, including the One-Step, whicheliminates or greatly reduces UV spitting and the SoftBlade, designed to significantly reduce score lines.New Stableflex, which eliminates or greatly reduceschatter. MDC Flexo Consumable Products includesend seals, cleaning brushes, protective roll covers,filter/magnet systems, cylinder repair kits, FOG inkremover and lint-free rags and more. Daetwyler providessolutions to improve efficiency and productivityfrom prepress to pressroom.www.nvpublications.comFlexo Market News November 21, 2011 11

Flexo Market NewsINTERNET DIRECTORYINTERNET DIRECTORYDuPont Packaging Graphicswww.cyrel.com/naDuPont Packaging Graphics is the world’s leadingsupplier of flexographic printing systems in digital andconventional formats; including Cyrel® brand photopolymerplates, Cyrel® FAST processing equipment,Cyrel® round sleeves, mounting and finishingproducts. For more than 35 years, beginning withCyrel®, the first photopolymer printing plate, throughto today’s digital workflow revolution, DuPont hasbeen driving innovation in the Flexo and packageprinting industries. The Digital Cyrel® FAST imagingsystem has been broadly recognized for its efficiency,productivity, print performance, and environmentalbenefits.Eaglewood Technologies / Sani-Blastwww.eaglewoodtech.comEaglewood Technologies, LLC is the maker of Sani-Blast anilox roll cleaning equipment and is the pioneeris anilox roll cleaning. We offer cleaningequipment and service for wide and narrow web rollsand print sleeves using environmentally safe bakingsoda. Eaglewood Technologies is also the exclusiveU.S. distributor of Pulse Roll Label Products includinga revolutionary linerless product. A recent addition toEaglewood’s product line is Variable Data Printing(VDP) equipment. To complete the product offering isa line of daily press cleaners.Flexotecnica – Get the Edgewww.flexotecnica.itFlexotecnica’s patented Safe Sleeve Change® systemand Speedy Clean® auto washup system aredesigned to give converters a competitive edgethrough Flexotecnica’s commitment to research anddevelopment. Service and support for Flexotecnicapresses is provided by North American Cerutti Corporationin New Berlin, WI, with U.S. resident technicians,an extensive spare parts inventory and anexperienced, dedicated service staff. Visit our website for more information.Flint Groupwww.flintgrp.comFlint Group Flexographic Products globally offers anoutstanding product range: nyloflex® and nyloprint®photopolymer printing plates for flexographic, letterpressand gravure applications along with coatingplates for offset printing, processingThe Label Printers (Cont’d from Page 1)ance Representative, and the company’s L.I.F.E. teamleader, and Gina Ries, Quality Assurance Supervisorand L.I.F.E. team member. The duo spoke about thecompany’s certification “journey.”Their presentation included the reasons the companyembarked on the sustainability initiative, why theyselected the L.I.F.E. program, how they went aboutbecoming certified, and some of the lessons itlearned along the way.Tommasi explained that The Label Printers chose theL.I.F.E. program (developed by the Tag and Label ManufacturersInstitute) because it was designed specificallyfor label converters and gave the program the samekind of credibility that ISO does in the quality arena.“We’ve learned a lot about sustainability in theprocess of achieving the L.I.F.E. certification,” he said,“chief among them are that it’s not necessary to reinventthe wheel, contingency plans are critical, andchange is a big part [of certification] – it can be hard,but you need to plan for it.”SuperCorrExpo ® AnnouncesNew Customer Program For 2012 ShowThe 2012 TAPPI/AICC SuperCorrExpo ® is offering anew customer program with two individualized tours:a Fast Track Equipment Tour and an Interactive ShowFloor Tour.These new experiences, not available at the2008 SuperCorrExpo, will allow attendees to have oneon-onenetworking time with a select group of exhibitors.SuperCorrExpo is scheduled for October 1-4,2012,at the Georgia World Congress Center in Atlanta.The Fast Track Equipment Tour is open to all companieswith a booth size of at least 1,250 square-feet andoperating corrugated machinery.TAPPI will invite participatingcompanies’ top ten customers or prospectsto attend a special tour prior to the exhibit opening.Those participating in the Fast Track tour will be dividedinto groups of 20 and will rotate through the participatingexhibitor booths every ten minutes.This willprovide an opportunity for exhibitors to distributebrochures, give a quick overview, swap business cardsand set appointments with key buyers.The Fast Track level also allows five representativesfrom participating exhibitors access to the CustomerLounge, where they can drop company literature,plus four tickets to attend the exclusive CustomerNetwork Party, where they will have the opportunityto supply promotional material. Participating companies’logos will be featured on SuperCorrExpo eventsignage and in the event guide.The Interactive Tour is open to all box plant attendeesand registration is complimentary for them.12 November 21, 2011 Flexo Market News www.nvpublications.com

Recycle Labels (Cont’d from Page 4)Seeing that recycling systems vary from municipalityacross the country, the labeling system encouragesconsumers to check locally. GreenBlue has launcheda web site, www.how2recycle.info, to help consumersstay informed on recycling issues.The systemwas based on the OPRL system in the United Kingdomand developed through three years of research,including extensive consumer testing and a nationaleffort to collect updated recyclability data.Flint Group Flexographic ProductsAnnounces Printing Plate Price IncreaseFlint Group Flexographic Products has announcedprice increases for nyloflex ® and nyloprint ® printingplates in 2012.“While the exaggerated cost situation is projectedto stabilize at a high level for single raw materialcomponents, costs for key material to manufactureprinting plates will continue to increase furtherwhile energy costs are forecasted to grow significantlyin the near future,” said Thomas Zwez, Vice PresidentOperations, Flint Group Flexographic Products.“This situation is compounded further with the factthat the markets are still driven by capacity shortages,which stems back to the economic crisis in2008, and by an increased global demand, in particularfrom emerging countries, which have escalatedthe competition for limited resources.Scholarship EncouragesFuture Leaders In PackagingPackaging World magazine and packaging converterPrintpack, Inc., Atlanta, Georgia, will recognizean aspiring packaging professional with the2012 Future Leaders in Packaging Scholarship. Establishedthis year to support and foster packagingeducation, the $2,500 educational scholarship willbe presented to a promising undergraduate studentwho is pursuing a Packaging Science degree fromClemson University.The Future Leaders in Packaging Scholarship hasbeen developed in conjunction with PackagingWorld’s Leadership in Packaging program, a community-basedprint and online program that enables suppliersto promote their innovation and commitmentto the packaging community.Applicants for the 2012 award must be undergraduatedegree candidates in Clemson University’s Departmentof Packaging Science. Clemson's packagingscience department scholarship review board will selectthe 2012 recipient.Flexo Market NewsINTERNET DIRECTORYINTERNET DIRECTORYHarper Corporation of Americawww.harperimage.comWe’ve made ceramic anilox rolls longer than anyonein the world and pride ourselves on being the best inthe world. Whether wide web, narrow web, newspaper,or corrugated markets, Harper continuouslystrives to bring new flexographic products and servicesto the printing industry that will improve the qualityof your graphics.J I MacWilliam Co., Inc.www.jimacwilliam.comUsed equipment for flexible packaging, folding carton,paper, film, foil and non-woven industries. Professional,knowledgeable service for over 30 years.Mark Andy, Inc.www.markandy.comMark Andy, Inc. is a leading global manufacturer ofnarrow and mid-web printing and converting equipment.The company has a rich history of delivering solutionsto increase productivity and profitability for thelabel and packaging markets. The company suppliesleading global brands including Comco printing/convertingmachinery, Mark Andy printing/converting machineryand UVTechnology curing systems andreplacement parts. Mark Andy, Inc. is headquarteredin St. Louis, MO, with sales and distribution offices inFrance, Switzerland, and the UK.Sell A Repo.Comwww.sellarepo.comFinally a place to list, sell and buy repossessed equipmentat pre-auction prices!! Advertise or just browsegreat deals today.Link to these companies on-line atwww.nvpublications.comFor more information on listing yourcompany in our Internet Directoryplease contact:Tom Vilardi - tvilardi@nvpublications.comorGreg Kishbaugh - flexo@nvpublications.comwww.nvpublications.comFlexo Market News November 21, 2011 13

Classified AdvertisingRates: Boxed Ads: $95.00 per column inch, Line ad:$25.00 per line or fraction thereof. To place ad call (847)441-5645. Ads may be faxed to (847) 441-5652 or emailed to:advertising@nvpublications.com.Subscribe on-line atwww.nvpublications.comA New Hire -- New Product?E-mail your news to Greg Kishbaugh atflexo@nvpublications.comFlexo Market News® is published bi-weekly by NV BusinessPublishers Corporation, in association with Board ConvertingNews®, Corrugated Today® Recycling Markets®, InternationalPaper Board Industry®, Folding Carton Industry®, and BoardConverting News International. Editorial/Production offices:540 W. Frontage Rd., Suite 3124, Northfield, Illinois 60093.Phone: (847) 441-5645, Fax: (847) 441-5652, Marketing and Circulationoffices: 43 Main Street, Avon-By-The-Sea, NJ 07717,Phone: (732) 502-0500, Fax: (732) 502-9606. Subscription Ratesin U.S. and Canada $60 per year or $105 for two years. Overseasrate per year $80 USD. Current issue single copies (pre-paidonly) $3.00 in U.S. (elsewhere $7.50); add $5.00 per order forshipping & handling. No part of this publication may be transmittedor reproduced without permission from the publisher.Tom Vilardi - President/PublisherJim Curley - Vice President/Editor-in-ChiefRobyn Smith - Executive PublisherGreg Kishbaugh - Editor/Co-PublisherPhone: (317) 306-1060 • Fax: (847) 441-5652email: flexo@nvpublications.comGail Kalina - Senior Administrative Office/Production ManagerAnna Dutko Rowley - Associate EditorLen Prazych - Contributing EditorJackie Schultz - Contributing EditorDan Brunton - Managing Director/EuropeTed Vilardi - Co-Chairman, RetiredJ.Anton Schiffenhaus - Co-Chairman©2011 NV. PublicaionsAll Rights Reservedwww.nvpublications.comNext Generation Dual Turret SlitterRewinder Launched At ICE Europe 2011Atlas Converting Equipment Ltd. launched the nextgeneration TITAN SR9 Series slitter rewinder technologyat the ICE Europe 2011 exhibition in Munich,Germany. New features include reduced power consumptionand enhancements in sustainability.Atlas Converting Equipment Ltd. has obtained andapplied for six patents on the Titan SR9-DT model.These advanced designs have reportedly led to improvementsin quality of slit reels, reduction of set-uptime and increased productivity.Live demonstrations of the new Titan SR9-DTrewinder at the event included processing a 1210mmwide, 30 micron, eight color flexo printed NaturalOPP film substrate.In other news, Converplast Embalagens Ltda., locatedin Guarulhos, close to Sao Paulo, Brazil, has investedin a new 1350mm wide Titan ER610 compactslitter rewinder. The company installed its first Titanslitter rewinder, an SR6 model, almost 20 years ago.Converplast is a private company owned and managedby President Victorio Murer and his son Mauro.Atlas has now sold more than 100 Titan ER610 slittersworldwide. The machine is available in two webwidths — 53 inches x 65 inches – with a maximumrewind diameter of 24 inches. It also features a 10-inch touch screen control system and an integraledge-trim extraction system.Chemrec ReceivesTwo Environmental AwardsChemrec AB recently received two awards, the AlwaysOnGoingGreen Global 200 and the 2011 GlobalCleantech 100, both for the third year running.The AlwaysOn editorial team, along with partners atMorgan Stanley, SAP, KPMG, Hewlett-Packard, GoldmanSachs, Technology Partners, Bridge Bank, SheppardMullin, Silicon Valley Bank, NEA, focus oncompanies striving for environmental friendliness.The 2011 Global Cleantech 100 is produced by theCleantech Group, providers of global market research,events and advisory services for the cleantechindustry.Nazdar, Color-LogicForm Technology PartnershipNazdar, manufacturer of ultraviolet, water-based,and solvent-based flexographic inks, has been nameda technology partner by Color-Logic.Color-Logic develops color communication systemsand software tool sets for a variety of special effectprinting applications.14 November 21, 2011 Flexo Market News

Winner, 2011

How Tempo PlasticsGot the Edge“The versatility we get from having three Flexotecnicapresses, along with Flexotecnica’s service and support, hasgiven Tempo Plastics a definite competitive edge.”Serviced and Supported by:North American Cerutti Corporation15800 West Overland DriveRandy O’Hara, Michael Bannon and Mike Thompson- Michael Bannon, Vice President, Tempo PlasticsNew Berlin, WI 53151Tel: (262) 327-1667Fax: (920) 499-2291www.flexotecnica.itGet the Edge.