Airwell Aqu@Scop Advance DCI.pdf - Air Conditioning

Heat pumps |
PRODUCT ADVANTAGES AGES
Single-unit system “ready to operate”.
Variable-speed compressor to always provide power to match the
demand.
“Gentle” starting without inrush current, even on networks with
undervoltage.
High-performance exchanger with counter-current exchange.
Specially dedicated for the heating mode.
“Blue Fin” hydrophilic coating of the exchanger for quick defrosting.
Operation according to a water programme for high annual COP.
Tested adjustments, known to all professionals.
High accessibility for maintenance operation.
Low noise levels.
42
Aqu@Scop Advance
DCI
AIR/WATER RESIDENTIAL HEAT PUMP
Ideal for new construction.
Management of domestic hot water.
Double zone.
Water outlet temperature up to 55°C.
Operation with outdoor temperatures as
low as -15°C.
Ideal for operation on heating floors,
low-temperature radiators,
fan coil units.
3.9 to 14.9 kW of heating over 3 models.
Built-in 6 kW electric heater (2 stages).
Built-in expansion vessel.
Built-in circulator pump.
Backup starting switch.
Water flow controller as standard.
Water filter (supplied, not installed).
HEATING MODE
HIGH TEMPERATURE
UP TO 55°C
WATER
PROGRAMME
ACCESSORIES/OPTIONS
Accessories Part number
Shut-off valve with pressure tap 7ACFH0423
1” hose kit, length 1 m 7ACFH0422
Decanting �lter (sludge pot) 7ACFH0666
Three-way valve alone for domestic hot water management or boiler backup 7ACFH0543
300-litre domestic hot water tank kit 7ACFH0662
"Plate exchanger & circulator pump" kit for domestic hot water, top outlet
(sensor supplied for installation in a thimble)
7ACFH0789
"Plate exchanger & circulator pump" kit for domestic hot water, bottom outlet
(sensor supplied and installed)
7ACFH0801
Hydraulic connection kit with three-way valve 7ACFH0490
Hydraulic connection kit without three-way valve 7ACFH0491
140-litre buffer tank / mixing tank 7ACFH0663
Remote wireless ambient sensor 7ACEL1593
Dual-zone kit for radiators and �oor (3-way valve + thermostat) 7ACFH0808
Wired programmable and communicating ambient thermostat 7ACEL1592
Shock-absorbing support feet 7ACTL0472
Water �lter (supplied, not installed) STD
Water �ow controller STD
R410A
R410A FLUID
HEATING/
COOLING
FLOOR
HEATING/COOLING
FLOOR
PRODUCT DEVELOPED
AND MANUFACTURED
IN FRANCE
DC INVERTER
LOW
TEMPERATURE
HEATER
LOW-TEMPERATURE
RADIATOR
CE STANDARD
-
OUTDOOR
OPERATING LIMITS
IN HEATING MODE
BI-ZONE
°C

7ACEL1592
7ACFH0662
7ACFH0543
7ACFH0491 (alone)
7ACFH0490 (kit)
7ACFH0666
BACKUP STARTING SWITCH
This switch can be used to switch manually from priority heating
of the compressor to additional heating.
Wired ambient thermostat
- Adjustment of ambient temperature
- Daily or weekly programming
- Holiday programming, no-frost mode
MAIN OPTIONS AND ACCESSORIES
43
7ACEL1593
300-litre domestic hot water tank
(and 2.5 kW of electrical resistance heaters)
optimised with the operation of the Aqu@Scop HT
- Three authorisation modes
- Holiday mode
- Programmable anti-legionella function
- Management of the three-way valve / circulator pump couple
- 3.1m 2 exchange surface 7ACFH0663
ON/OFF three-way valve
Required for optional production of domestic hot water.
Directs the produced hot water either towards the heating
circuit or towards the domestic hot water tank. A second
three-way valve is recommended for boiler-backup
installation.
Hydraulic kit
For connecting to the boiler, available alone or in a
complete kit with the three-way valve.
Made up of a set of assembled pipes and valves,
a set of connectors with spherical-conical seat.
Decanting pot (sludge pot)
Effectively separates the impurities from the heating
circuit and collects them in a decanting chamber, where
they can be bled off, even while the installation
is operational.
7ACFH0789
(top outlet)
7ACEL1801
(bottom outlet)
7ACTL0472
Wireless thermostat with radio communication
Sends the measured ambient temperature.
140-litre buffer tank / mixing tank
Necessary when the volume of water in the installation is
insuf�cient. It protects the heat pump against short cycles
that can reduce the useful life of the compressors and
improves operation during defrosting phases.
Domestic hot water kit
Required when replacing existing installations.
This kit, made up of a plate exchanger and a circulator
pump, enables the production of domestic hot water
using existing tanks (electric cumulus).
Top outlet: sensor installed on the top outlet of the tank.
If not possible, bottom outlet: sensor installed on the kit.
Shock-absorbing support feet
Raise the heat pump by 10cm, allow the evacuation of
condensates and defrosting water.
Their rubber design provides excellent shock absorption
against the transmission of vibrations through solids.

Heat pumps |
OPERATING LIMITS
WATER CIRCULATOR PUMP PRESSURE FLOW CURVES
ADVANCE 006 ADVANCE 012
Available pressure
kPa Bar
60 0.6
50 0.5
40 0.4
30 0.3
20 0.2
10 0.1
0
ADVANCE 016
Available pressure
0
RESPECT FOR THE ENVIRONMENT WITH UP TO 80% LESS CO2 EMISSIONS
The Airwell Aqu@Scop is a heating solution that makes the most of natural energy sources
R410A
800
kPa bar
60 0.6
50 0.5
40 0.4
30 0.3
20 0.2
10 0.1
0
Water starting temperature (°C)
Nominal flow
rate
HS
MS
LS
70
65
60
55
50
45
40
35
30
25
20
Aqu@Scop
Advance
while respecting the environment. It operates in a closed circuit and uses “green” R410A fluid
which helps save the ozone layer.
Aqu@Scop Advance-R
-25 -20 -15 -10 -5 0 5 10 15 20
1000 1200 1400 1600 1800 2000
Water flow rate (l/h)
HS
Nominal flow
rate
0
1300 1500 1700 1900 2100 2300 2500 2700 2900
Water flow rate (l/h)
Outside air temperature (°C)
44
Available pressure
kPa Bar
60 0.6
50 0.5
40 0.4
30 0.3
20 0.2
10 0.1
0
0
800
25
Nominal flow
rate
HS
MS
LS
1000 1200 1400 1600 1800 2000
Water flow rate (l/h)

AQU@SCOP @SCOP ADV ADVANCE
TECHNICAL DAT ATA Heating floor application
OUTDOOR AIR
REGIME 7°C
OUTDOOR AIR
REGIME 2°C
OUTDOOR AIR
REGIME -7°C
Application to radiators / fan coil units
OUTDOOR AIR
REGIME 7°C
OUTDOOR AIR
REGIME 2°C
OUTDOOR AIR
REGIME -7°C
AIRWELL SOLUTIONS
45
ADV 006 ADV 012 ADV 016
Floor heating power / water regime 30/35°C kW 6.62 (3.9 to 8.8) 10.76 (5.68 to 12.95) 15.47 (7.66 to 19.08)
COP* 4.19 4.03 4.16
Floor heating power / water outlet 35°C kW 4.96 8.56 11.77
COP* 3.15 3.24 3.28
Floor heating power / water outlet 35°C kW 3.7 6.9 9.01
COP* 2.44 2.6 2.51
Radiator heating power / water outlet 45°C kW 8.72 12.43 16.87
COP* 3 2.82 3
Radiator heating power / water outlet 45°C kW 6.6 10.33 13.41
COP* 2.48 2.38 2.5
Radiator heating power / water outlet 45°C kW 5.3 8.1 10.11
COP* 2.04 1.9 2.01
GROUPE Sound power dB(A) 63.5 65 65.5
POWER SUPPLY
1~230V-50Hz
* COP values with defrosting.
** According to application conditions.
Sound pressure at 5 m in free �eld dB(A) 41.5 43 43.5
Compressor type Inverter Rotary Scroll Scroll
R410A �uid Kg 2 2.9 3.6
Dimensions (WxDxH) mm 1232x401x905 1232x401x1307 1232x401x1307
Weight Kg 125 175 185
Outdoor temperature operating limits** °C -15 -15 -15
Water outlet temperatures (mini/maxi) °C 25/55
Exchanger type Plates
Water intake/outlet connections inches 1” Female
Expansion vessel l 3 5 5
Electric backup (2 stages) kW 6(2+4) 6(2+4) 6(2+4)
Power cable mm 2 3x10 3x16 3x16
Protection rating A 40 63 63