CP-X2511 Users Manual - Hitachi America, Ltd.

OPTION menuItemMY BUTTONMY SOURCE(continued on next page)DescriptionThis item is to assign one of the following functions to MY BUTTON1/2 on the remote control (6).(1)Use the ▲/▼ buttons on the MY BUTTON menu to select aMY BUTTON - (1/2) and press the ► button to display the MYBUTTON setup dialog.(2)Then using the ▲/▼/◄/► buttons sets one of the followingfunctions to the chosen button. Press the ENTER or INPUTbutton to save the setting.• COMPUTER IN1: Sets port to COMPUTER IN1.• COMPUTER IN2: Sets port to COMPUTER IN2.• COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr).• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets port to VIDEO.• INFORMATION: Displays the INPUT_INFORMATION (46) orthe SYSTEM_INFORMATION or nothing.• AUTO KEYSTONE : Performs automatic keystone distortioncorrection (34).• MY MEMORY: Loads one of adjustment data stored (28).When more than one data are saved, the adjustmentchanges every time the MY BUTTON is pressed.When no data is saved in memory, thedialog "No saved data" appears.When the current adjustment is notsaved to memory, the dialog as shown inthe right appears.If you want to keep the current adjustment, please pressthe ► button to exit. Otherwise loading a data will overwrite thecurrent adjusted condition.• ACTIVE IRIS: Changes the active iris mode.(This function does not apply to the CP-X2011.)• PICTURE MODE: Changes the PICTURE MODE (24).• FILTER RESET: Displays the filter time reset confirmation dialogue(43).• TEMPLATE: Makes the template pattern selected to theTEMPLATE item (40) appear or disappear.• AV MUTE: Turns the picture and audio on/off.Using ▲/▼ buttons selects the picture input port to be selected withpressing the MY SOURCE/DOC.CAMERA button on the remotecontrol.Select the picture input that is connected with a document camera.COMPUTER IN1 COMPUTER IN2VIDEO S-VIDEO COMPONENT44